Brake lights on both sides gets stuck on once the pedal is pressed. This produces no error codes. I was told it could be the brake pedal pressure sensor switch. I changed this and it did nothing. This is very dangerous to other drivers because they are not sure if the car is braking as the light is always on and will burn out the bulbs and melt the housing if constantly on. This can be reproduced either while parked or in motion.
Lights
BMW M3 Coupe Lighting problems by year
31 complaints filed with NHTSA about the BMW M3 Coupe's lights. Headlights, tail lights, brake lights, turn signals and interior lighting failures.
Lighting complaints by model year
Latest M3 Coupe lighting complaints
The zkw xenon headlights have a flaw in the plastic projector housing. The housing gets too hot and melts and the light output is severely restricted. This happens to 100% of the headlights made by this manufacturer and is a safety issue. The reflective coating on the headlights melts and the light can no longer be projected out correctly. The fog lights are now brighter then the headlights. The vehicle can no longer be safely driven at night. Spare parts are not available and the only fix is to replace the entire headlights at a cost of over $2000. There should be a recall to replace the headlights as this is a safety issue of not being able to see.
There is limited light output from the xenon/hid headlight assemblies due to "melted" projector bowls from bmw. This is a serious safety defect that prevents end users from being able to see the road and objects ahead of them. *Tr
Xenon headlights my xenon headlights only work intermittently and when they do work they just barely light the roadway. This could cause a vehicle crash without warning. I went to the bmw dealer and they told me that this malfunction could only be repaired at my cost and that the xenon lights had simply worn out. This is obviously a design flaw. Rear turn signal lghts, brake lights I also have had problems with the driver's side rear turn signal and brake light. Over time, resistance in the electrical contacts may...
Read the full complaint
cause one or more rear lamp functions (tail light, brake light, and/or turn-signal), within the vehicle's body panel, to stop working. The intermittent light operation reduces the ability to warn other motorists of the driver's intentions. This can result in a vehicle crash from the rear.
Oem projector headlights burnt behind projector causing very dim lights. *Tr
My tail lights and turn signals work for a while then quite working. The exact same symptoms as recall #11v438000 for the same type, model and year as my car, but bmw says my vehicle is not included. *Tr
The report is in response to not being included in a recall of the rear taillight assembly. Some vehicles seem to be excluded for no reason from the recall and replacement of faulty wiring. Nhtsa campaign id # 11v438000. *Tr
My car was in a collision where the driver of car 1 was making a turn into the main street , she turned too wide and could not complete the turn and decided to back up..She slammed into my car ,damage was left front bumper ,broken parking light, damage left front fender , xenon headlight module,(causes the left head light to turn of sometimes) and the air bag light came on , diagnosis found drivers seat belt tensioner fault ,since there was the impact on the drivers side. The driver of car 1 was cited for he...
Read the full complaint
incident and also for driving on a learners permit alone. State farm only covered the body repair and declined the repair of the air bag and the head light. I am concerned about the safety of any one inside this car if there was any reason for the deployment of the air bag and it did not deploy at the time. My car was in perfect condition before this accident. I would like to have my car repaired and feel safe driving. *Tr
The projector bowls on the zkw headlights were burnt out due to a design flaw. I see lot of complaints online with the same issue. Driving in night is really difficult and dangerous. *Tt
Due to the plastic bowels in the headlight projectors, which are chrome like lined, and the high heat of the hid bulbs, this chrome like coating has burned off making the light output of my hid head lights very dim. The outside of the bowels have gone from a chrome like coating to a bronze/caramel color/coating. This problem is very obvious. I have had other vehicles with hid headlights, and the light output of those cars is easily double or more, to the point where alot of times I have to drive with my fog lights...
Read the full complaint
on just to light the road up to be able to see well enough so that I don't have a accident. I have pictures I took of the discolored bowels im talking about on my phone that I would be able to send. *Tr
Zkw xenon headlight reflector bowl is burned resulting in very dim light output. I am often afraid of driving at night because I feel it is a danger to my safety.
Tl* the contact owns a 2003 bmw 323. The contact stated that the headlights would flicker on and off. The turn signal light would also flicker abnormally. The vehicle was taken to an independent mechanic where they advised him that the taillight assembly needed to be replaced. The vehicle had not been repaired. The manufacturer was contacted and they advised the contact that the vehicle was not included in nhtsa campaign id number: 11v438000 (exterior lighting:tail lights). The failure mileage was approximately 150,000.
The bmw e46 (3 series bmw) that was made from 1999 to 2006. In some cases during these years they used a lighting manufacturer "zkw" for their xenon headlights. Unfortunately these lights have a common failure issue commonly referred to as a "burnt reflector" on the internet and on bmw forums. This is a non-consumer replaceable part. When this part fails it causes the vehicle to not have effective headlights. I personally have had times where my field of vision could not see items on the road due to the dim...
Read the full complaint
lights. The only remedy appears to be to replace the entire headlight assembly to the tune of hundreds of dollars (well over a thousand if you do both sides). In my opinion bmw should correct this issue for the consumer. Headlights are an important safety item. To have a part fail that is not consumer replaceable is unacceptable. Many people have this issue but have no way to remedy it. Just google it or check e46fanatics.Com. You will see that there are plenty of people that realize this is an issue. *Tr
My bmw 2003 330i is equipped with zkw headlight assemblies that have plastic xenon projector bowls installed inside the headlight assemblies. After several years of usage these projector bowls burn out and as a result, the reflective coating that allows light to be focused through the projectors are burned off reducing effective light output from the headlight assembly. Upon inspection, both my headlight assemblies suffered approximately 50% loss in effective light output due to burned out xenon projector bowls and...
Read the full complaint
I found that my fog lights were putting out more light than both my zkw headlights. This problem affects all 3-series sedans made from 2002 - 2005. There have been many people who have, as a result of bmw inaction to do the right thing and correct this serious safety deficiency, either replaced their original zkw headlight assemblies with depot aftermarket headlight assembles or have replaced the defected zkw projector bowls with al projector bowls or fx-r projector bowls. This problem needs to be addressed as it is a serious road safety issue while driving at night. *Tr
Zkw bi xenon headlights reflectors burn out over time. The bowls are shot and they were black, burned to a crisp. They were made out of a plastic material with a chrome coating, instead of a metal reflector. This should be a recall for bmw. They got the tail light which works fine in my car, I need my headlights to see! *Tr
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data