Low beam headlight reflector lens deteriorates in just over one year. Not the lens itself but the reflective material. *Tr
Lights
Buell XB12R Lighting problems by year
17 complaints filed with NHTSA about the Buell XB12R's lights. Headlights, tail lights, brake lights, turn signals and interior lighting failures.
Lighting complaints by model year
Latest XB12R lighting complaints
Reflective coating in headlight housing gets hot and changes color. Headlight output is diminished and night time visiblity deteriorates. *Tr
Headlights reflective coating failing. Lights becoming too weak to see at night. Please note- model is xb12r, not available on your list, closest available was xb12s, headlights not the same on these two models. *Tr
Failure of reflective coating inside of headlight projector, dimming of headlight noticeable at 5,000 miles, took apart the projector and noticed degradation (charring) of reflective material, now at 17,000 miles (8 months) the low beam housing does not illuminate the road enough for safe travel at night. *Tr
On my model year 2005 buell model xb12r the reflectors on my headlights are melting.This is most noticeable on the low beam assembly. As a result of this melting and degradation the projected beam is dangerously low. It is now difficult to use after dark. *Tr
Headlamps had become extremely dim over time. Re-aiming was attempted as was new bulbs, but the problem remained. Finally I dissasembled the lamp housing and found that the reflective coating was gone and that there was melting occuring on the inside of the plastic housing! Seems like a possible fire concern.
INADEQUATE/UNSAFE LIGHTING. *NM
The reflective surface on the head lamps on my 2004 buell xb12r firebolt have degraded to the point that the lamps had to be replaced. *Nm
The lights on my 07 firebolt are starting to dim. After further investigation I noticed the reflective light housing material is deteriorating causing bad illumination. *Nm
The head lamps on my 2004 buell xb12r are in need of replacement due to degradation of the reflective coating on the lamp reflector. The reflector is actually rubbing off, reducing the output of the light to a point dangerously ineffective for night driving. This affects both the low and high beam assemblies. This seems to be a manufacturing defect, leading to a potentiality dangerous situation while riding at night. *Jb
Reflective surface inside of headlights has degraded to the point that the bike cannot be safely ridden after dark. *Jb
On the buell motorcycle xb9r and xb12r the headlights become non functional after about 1 yr of usage. The headlight housing reflective material turns to powder due to the natural heat from the headlight. *Jb
Tl*- the contact stated that the 2005 buell xb12r motorcycle headlight coating and light lenses degrading due to heat and poor materials. The contact stated that once degradation began the light output was seriously diminished. The light assembly has been replace donce under warranty on 06/2006. The manufacturer was aware of this defect, but continued to replace the lights with the sme units that have been failing. While driving at night he had difficulty seeing the road in front of him due to these headlights on the motorcycle. The failure mileage was 4800, and the current mileage was 5600.*Ak updated 04/12/07. *Jb
Headlight issues on 2005 buell xb12r motorcycle. Reflective coating and light lenses degrading due to heat and poor materials. Once degradation begins, headlamp light output is seriously diminished. My light assemblies have been replaced once under warranty. It appears that the manufacturer knows of this defect, but continues to replace the lights with the same units that have been failing. *Nm
The headlight assesmbly is an extremly serious safety hazard. Two weeks after purchase, my low beam is so dim that I have been pulled over twice. All xb firebolt models have this same flaw. Some have even caught fire. See http://www.Badweatherbikers.Com/buell/messages/4062/249692.Html?1170945540 The technical problem is that the reflectors inside the light assemblies degrade very rapidly due to the heat and cheap materials. Bmc has known about this problem for years and still has not addressed it. Does someone have to die before they act? *Nm
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data