Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Steering

Chrysler Concorde LTD. Steering problems by year

11 complaints filed with NHTSA about the Chrysler Concorde LTD.'s steering. Loss of power steering, stiff or loose steering, wandering, column and rack problems.

Steering complaints by model year

YearSteering complaintsCrashesInjuriesRecalls
20045000
20032000
20024000

Latest Concorde LTD. steering complaints

2004 Chrysler Concorde LTD.SteeringEngine & cooling

On our second engine now. The second engine is now doing the same as the first before it quit. The check engine light is now on and no one can seem to tell me why the car keeps stalling while driving at a variety of different speeds and conditions. When it stalls the car is still partially on. The power steering goes out and I can not accelerate but there are still a couple of lights on the display the same ones that turn on when you turn the key half way forward. I think the electrical is still on but the...

Read the full complaint

engine is off. Does that make sense? I am not a mechanic, but they can't figure it out either so I guess that wouldn't help! The check engine light code refers to the catalytic converter, but I have been told that it is fine. This is a concorde lxi actually should be called pos instead of lxi. We have replaced the cam sensors, the cam shaft, battery, alternator, battery cables, the transmission, and the engine. It still quits several times a month. This all began before the warranty went out, it paid to replace the first cam sensor. This was my first car and I didn't know what to do after the warranty wore out. I still don't know what to do. Mechanics tell me to get a new car I can't afford one.

Filed Incident Steering · Engine and engine cooling · Unknown or otherNHTSA 10322227
2004 Chrysler Concorde LTD.Steering

On november 4th, 2009, I was pulling into parking position with my wheel turned all the way to the right to avoid collision with the vehicle in the parking space next to me. As the turning continued I heard a lot pop sound and immediately following this sound was loss of wheel control. I had to slam the brakes because my vehicle had started towards the car in front of me. Which is the car parked next to the parking lot I was trying to park into. Obviously there was a failure in the steering column or shaft. Thankfully, I was traveling at a slow rate of speed. I was able to stop the car before I ended up hitting the car in front of me. *Tr

Filed Incident SteeringNHTSA 10290946
2004 Chrysler Concorde LTD.Steering

My car started making a lot of clunking and grinding noise when I would turn the steering wheel and when I would go over a bump while turning, so I took my car in to a car shop and they said that it was the tie rods on my car and that if I didn't get it fixed that I would more than likely have bad accident because the steering would lock up, so I am having my car repaired at my cost, when chrysler should have taken care of this when it was first brought to there attention. My car is a 2004 chrysler concord with...

Read the full complaint

only 61744 miles on it, I was lucky enough to know that there was something wrong with my car and have an appointment to get the tie rods fixed before I get killed, my appointment is nov 18, 2008. *Tr

Filed Incident SteeringNHTSA 10249037
2004 Chrysler Concorde LTD.SteeringSuspensionBrakesEngine & coolingFuel systemTransmission & drivetrainElectrical systemLightsAirbagsSeats & seat beltsBody, doors & structureAcceleration & cruise control

I did not have a accident. But I have had this car for only 15 months and I've had to take this car in for the same defect several times and many times over and over again especially the last 3 months. I've had it with this car and I can't deal with this any more. And toyota of escondido where we bought the car can't seem to get it right or give us another car. *Tr

Filed Incident Steering · Suspension · Service brakes, air · Engine and engine cooling · Fuel system, gasoline · Power train · Electrical system · Exterior lighting · Air bags · Seat belts · Latches / locks / linkages · Vehicle speed control · Unknown or otherNHTSA 10243774
2002 Chrysler Concorde LTD.Steering

I got to work this morning 4/18/2008 8:15 and turned in the parking lot and couldn't steer the ...Wheel. Enough is enough. This is my 3rd car I have bought from chrysler and I am fed up. The third time has not been the charm. *Tr

Filed Incident SteeringNHTSA 10224886
2002 Chrysler Concorde LTD.SteeringSeats & seat belts

Tl*the contact owns a 2002 chrysler concorde. While accelerating from a stop, the back of the driver seat reclined to the floor without warning. The contact pulled off the road and noticed that the entire seat failed. Chrysler stated that the vehicle was previously repaired under nhtsa campaign id number 03v035000 (seats:front assembly:recliner). The manufacturer stated that they would not repair the seat again for free and would not provide reimbursement for the repairs. The current and failure mileages were 53,000. Updated 01-14-08. *Kb a local mechanic replaced the seat track and tie rod end. Updated 12/12/07. *Jb

Filed Incident Steering · SeatsNHTSA 10204000
2002 Chrysler Concorde LTD.Steering

I just got off the highway. While I was parking the vehicle I heard popping noise under the hood and I completely lost steering. The bolts holding the inner rods and rack and pinion broke off. After some research I found out that this is very common problem for this line of chrysler vehicles. I called chrysler customer service. They claim that this is not their problem because the car is not under manufacture warranty.. *Tr

Filed Incident SteeringNHTSA 10199390
2004 Chrysler Concorde LTD.Steering

Linkage from steering column broke in half while my wife was driving with my daughter and her friend . The month before we were coming home from a trip to sacramento about 3 hours away from home and the cam module failed we were stranded on the freeway with two 13 year old girls finally car started and we drove it to the dealer the car was almost dying out but we got there! *Tr

Filed Incident SteeringNHTSA 10188531
2003 Chrysler Concorde LTD.SteeringEngine & cooling

Tl*the contact owns a 2003 chrysler concorde. While driving 55 mph, the vehicle completely shut off. After several attempts to restart the vehicle, it operated properly. The vehicle was taken to a dealer on multiple occasions and stated that the clock spring had failed. This failure prevents the air bags from operating. The vehicle has not been repaired. The current mileage is 65,816 and failure mileage was 12,000.

Filed Incident Steering · Engine and engine coolingNHTSA 10188261
2003 Chrysler Concorde LTD.Steering

This is the second time that the bolts holding the pulley for the power steering sheared off. The first time I was driving on the turnpike. The second time I was stopped at a traffic light. Both times I lost power steering. I am lucky that I had the strength to control the car. This has to be a manufacturers defect. I do not feel safe driving this car. The last incident occurred on 10/28/2006.

Filed Incident SteeringNHTSA 10172115
2002 Chrysler Concorde LTD.Steering

While driving my 202 chrysler 300m the steering mechanism failed and I had no control of the vehicle. *Jb

Filed Incident SteeringNHTSA 10110186

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience