Rear brakes and wiring overheated rear Caliber and rotors causing damage. Currently at the Ducati dealership awaiting repair. Details from Ducati Service Advisor: As you can see in the images, the rear brakes got so hot that it seized the pistons in the calipers, and also melted the wheel speed sensor wire.
Brakes
Ducati Diavel Brake problems by year
10 complaints filed with NHTSA about the Ducati Diavel's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.
Brake complaints by model year
Latest Diavel brake complaints
Rear brake does not work. pedal bottoms out with no braking action unless pumped rapidly.
Back brake doesn't work
Rear brakes completely fade and are useless over a period of months. Bleeding the brake line works for a short period but is timely and costly. The current set up allows excessive heat from the exhaust and possibly catalytic converter to boil brake fluid. This is a known issue that may require intervention. *Tr
There is a chronic problem with the rear brake becoming unusable. The brake line passes much too close to the catalytic converter, which vaporizes the brake fluid and creates a gas pocket in the line. This renders the brakes unusable. Draining the line requires removing the rear wheel (a huge job on a ducati) and caliper. The problem returns almost immediately. They have serviced it several times, but each time it immediately fails again. It is very unsafe.
The bike only has 2300 miles, has never been in accident or damage in anyway. However the front brakes lines somehow become pinched resulting in complete brake failure whenever you turn the handle bars to the right.
After letting my motorcycle sit for a period of time (6 weeks) I went for a ride. As I pulled away, I pressed my rear brake pedal, and felt that I had no rear brake. After "pumping" up the rear brake I did get some brake back, but it went away within minutes. Every time I ride my bike now, I have to continually "pump" the brake to get the brake to properly function. I have talked to the dealer about this, and they stated "that is just the way it is... Ducati knows about it, but they are not doing any warranty...
Read the full complaint
repair, as it is just a poor design". All the ducati motorcycle forums are aware of this problem, but ducati will still not issue a fix for it. I guess a bunch of folks have to get killed first. *Tr
Cpsc: i1480595a. Ducati diavel motorcycle. Consumer stated the motorcycle had no working rear brakes. *Ln
When I received this motorcycle second hand, it was just about out of warranty. I did take it to a local dealer for service and noted to them that the rear brake was not working well at all. The said they would attempt to fix it but not to keep my hopes too high! I found out later from a sales manager that the rear brakes on ducati's are notoriously poor. I eventually had the rear brake line bled by another mechanic and that only helped slightly and for a short period. Although the front brakes are far more...
Read the full complaint
important on a motorcycle, the rear brake has safety implications as well. First, it can add 15% or more to pure stopping power. Also, being able to use a rear brake (feathering it) while making a turn helps control the bike. Using the front brake can cause a crash. Not having a usable rear brake therefore is not good. I have alerted ducati about the problem and they promised to have the usa division contact me, which has not happened in the past month since I complained. Since the bike is now out of warranty, I feel I would be wasting my time to keep bringing into a dealer to fix and unsolvable problem. I think this is a defect and that all motorcycles should have sufficient rear brake systems put into the manufacturing process. It appears that at least some high end european bikes do not put a lot of effort into making quality rear brakes. By the way, I also lodged a complaint with the cpsc. *Tr
I just bought a ducati diavel 2012 and while driving the rear brakes locked, I almost went through traffic without brakes then flaming brake parts of the bike flew off and melted in the street. Then brake fluid sprayed all over the back of the bike. The rotors were scared and there were chips of the bike on the rear wheel. Brake fluid spayed everywhere and there was complete loss of brake pressure and the peddle was in a 5 o'clock position. The bike dropped because I was startled and gripped the front brake. I had to ride home with only the front brakes. I have a picture of the brake pad melted into the asphalt of the street. *Tr
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data