The guide rail on the driver's side contains a covered cable and also an angled belt guide at the top end of the webbing. The combination of these factors can lead, over time, to the cable's movement exerting abrading force to the lower edges of the cable's...
Seats & seat belts
Eagle Summit Seat Belt problems by year
108 complaints filed with NHTSA about the Eagle Summit's seats & seat belts. Seat belts that won't latch or retract, seat frames, seat heaters, recliners and child seat anchors.
Seat Belt complaints by model year
Seat Belt recalls
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
Latest Summit seat belt complaints
Driver side seat back release lever can and has caught drivers seatbelt causing rear of drivers seat to unexpectedly recline backwards when taking off from stop light. Very dangerous and hazardous to, as driver be unexpectedly propelled backwards because seatbelt has caught under release lever on left bottom of drivers seat. Can result in accident if drivers unexpectedly is prone because seat back reclined and no line of sight of other vehicles or hazards on road can be seen, just the interior roof of vehicle suddenly is all that drivers can see.
A recall for the seat belts was issued. Consumer had been waiting for three months to get the part repaired. Dealer stated they made the corrections, however the problem recurred. As a result, the driver's side seat belt is inoperable.*Ak "recall campaigns", for transaxles cooler hoses, installed cooler hoses. Recall for motorized shoulder belts, installed guid run and switches. Dealer made 2 attempts to repair l. F. Motorized seat belt. Kept vehicle for 5 weeks the first time. Belt never has worked after attempted repairs/recall. *Bf
I am the original owner of a 1993 eagle sumit, purchased in dover de. Within in the firs two years of owning the vehicle, the seat belt harness was recalled by the manufacure. I took my car in for the recall. Over the years the seat belt harness has never worked properly, often stopping in the middle of the automatic movement or havign a slipping action while in the belt when stopping. The seat belt harness recently stopped working completly.Tthe seat belt harness was considered to be a safety probem noted at my...
Read the full complaint
recent re-inspection of the vehicle. I called the dealership where I originally purchased the vehicle to inquire about repairs/replacement of the recalled seatbelt harness. And and any warranty/guarntee of the current recalled seat belt.The dealership's curren manager stated that chrylser does not reinburse for recall parts in vehicles this old. The current cost to replace the seat belt harnes is over $600.00 Dollars plus labor as quoated by hertich/ jeep & eagle dealer in dover, de. I was also given a run around by the store's general manager regarding his knowledge of the difference between warranty's for parts & reparis verses warranty/guarantee on recall parts by manufacures? At the present time, I am unable to drive my vehicle due to the car not passing inspection due to the seat belt harness problem and the high cost of the replacement part. The lap belt that is in the vehicle appears to be ok (not sure) how the two of these work together in this vehicle . At this point I am unable to get any answers regarding chrysler's responsiblity regarding this recalled seatbelt and any real dangers that may still be associated with this seat belt harness. To pay over $600.00 Dollars for a recalled manufatures defect part seems unfair. If the part cost this much for replacement, then it must have some liability and noted safety issue attached to the part itself. Shouldn't the liability of the replacement part be the manufacturer or the owner? *Ak
Driver's side motorized seat belt loosened when driving over a bump. On the passenger's side only the lap portion of the belt was operable. *Ak
Motorized seatbelt on driver's side seat popped open when vehicle went over a bump. The passenger's side shoulder belt did not lock, only the lap belt locked. *Ak
NO SUMMARY. DT
Drivers side front seatbelt has been replaced three times due to seatbelt fraying. Please provide any further information.*Ak
My driver's side seat belt--the cable came down from the track and now it's useless. I mentioned that to armory and they said it would cost me $850. To fix it. I was never notified of this in the mail or phone. I feel I shouldn't have to pay. If I'd have receive the recall notice back then, this may have never happended. Please let me know what to do next.*Ak
Consumer states recall was done on the seat belt cable, which came out, and the seat belt would not work, but vehicle is experiencing the same problem ,nhtsa campaign id #97v073003.
Need to find the closet. Dealer to repair automatic seat belt free based on nhtsa camp. Id # 97v073002. *Ak
The driver seat frame broke at the weld to the auto body. The rear left side closest to the door was where the weld joint broke.*Ak
Driver's seatbelt is stuck in up position, consumer unable to use seatbelt.*Ak
When getting in vehicle seat belt slid forward, and cable from seat belt came out of track. Also, seat belt stopped working completely. *Ak
Driver's side shoulder belt is getting stuck in one position of sliding track. There was recall 97v073002 issued for this defect. Repairs were performed, but problem has reoccurred. *Ak *slc
Cable in the automatic restraint retractor separated from assembly. Restraints were repaired under recall 97 v 073 002. Replacement failed. Dealer has been notified.*Ak
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data