Ford LTD II Problems by year

Blades may crack and may, over a period of time, loosen from fan assembly.

Some of the flexible five-blade engine cooling fans may be subject to high blade stresses that can result from resonant vibration inputs occurring during normal vehicle operation. This can lead to fatigue cracking of the blades. Portions of the blade may...

The involved vehicles were produced with brake push-rod to brake pedal retaining pins which were not heat-treated as specified. This could allow the brake pedal to become disengaged from the push-rod.

The involved vehicles may have been built with incorrect weld nuts that attach the rear portion of the front outboard seat track to the floor pan. The incorrect nuts have an oversize diameter and thread, and upon front seat track anchor bolt installation, the...

The steering gears on the involved vehicles may have been built with improperly manufactured sector shafts from which the threaded portions of the shafts may fracture and separate. Should the sector shaft fracture, the pitman arm may disengage from the...

The involved vehicles are equipped with shoulder harness retractors that may not lock. Should the vehicle experience a sudden deceleration or impact, the front seat occupant may not be restrained by the shoulder harness portion of the three-point seat belt...

Some of the involved vehicles may have been equipped with lr78-15 "c" load range truck tires instead of lr78-15 "b" load range passenger car tires. The wheels presently on the involved vehicles are intended for use with passenger vehicle tires and were not...

The involved vehicles may experience fuel leakage at the rubber hose connecting the fuel inlet tube to the carburetor filter. This leakage condition is due to insufficient insertion of the fuel tube into the hose or improper positioning of the hose clamp...

The involved vehicles were fitted with tilt steering columns containing transmission control inserts intended for trucks rather than passenger vehicles. This may cause the transmission selector pointer to be misaligned and the possibility of starting the...