Vehicle description: motorcycles. The engine cam bolt can lose its clamp load and/or break.
Engine & cooling
Harley-Davidson Flhrci Engine problems by year
8 complaints filed with NHTSA about the Harley-Davidson Flhrci's engine & cooling. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.
Engine complaints by model year
Engine recalls
Latest Flhrci engine complaints
I have a 2006 roadking classic with 10,609 miles. Mileage when problem started was 9,837. While riding in the black hills, going down a 6% grade, the engine dies and the speedometer dropped to 0. I coasted to the bottom of the grade and pulled off onto the shoulder of the road. When I stopped, the fuel pump pumped up, the check engine light came on and went off, and I started the bike and went on. About 3 days later it done it again, again going down a steep grade. This time I pulled in the clutch and flipped the...
Read the full complaint
engine kill switch off and on and the electric came back. I started the bike and went on. It did it a total of three times in ten days, and each time I was going down a grade. I took it to dodge city harley davidson, they checked it and could not find anything wrong. I was passing a vehicle the 2nd time and was just pulling in front of him when it died out. Not a good thing or feeling going 65mph. Does anyone else have this problem or know how to fix it? *Tr
This is a complaint about the service life of the new twin cam engine's bottom end. There seems to be a large number of connecting rod bearing failures once the bike has reached 40,000 miles. Mine failed at 68,000 miles but I have talked with one rider whose bottom end failed at 43,000 miles. Harley appears to have changed the way they build the flywheel assemblies. They are no longer putting an insert in the connecting rods for the bearings to ride on. Instead they are merely flame hardening the area. Once the...
Read the full complaint
hardening fails the entire assembly rapidly deteriorates. All the periodicals and harley dealerships are touting that this bottom end should last 100,000 miles easily. However, if my own personal experience and the experience of numerous harley owners on the internet are any indication then there are a lot of motorcycle engines out there requiring a rebuild well before 100,000 miles. I have written to harley davidson and ask them to reimburse me the $1,000 I spent to have the bottom end rebuilt which did not include the cost of additional parts and time by doing most of the work myself. Additionally I ask them to try to engineer a better flywheel assembly. Harley refused my reimbursement request and told me they would forward my letter to the engineering department. *Jb
Catastrophic engine failure occurred twice in a new 2003 harley-davidson motorcycle at 3284 miles and again at 7420 miles. The first was due to a cracked flywheel, which was replaced under warranty, and the second due to a broken oil pump. The cause was determined by an engineer's measurements to be mis-aligned crankcase, and the manufacturer refuses to repair or replace the engine. *La
Motorcycle hesitates at highway speeds. Dealer has been notified. Please provide more information.*Ak
While riding motorcycle, cam bearing failed, causing motorcycle to completely shutdown. Dealer has been contacted. *Ak consumer states that after repairs, engine is noisy and exhibits an oil leak. *Tt
Rear camshaft bearing assembly disintegrated, sending metal particles through the lubrication system into the oil pump, necessitating replacement of many engine componenents.
NO SUMMARY
Cams always is very noisy and believe they will go completely out any day now possibly in a curve, causing severe injury or death.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data