Harley-davidson is recalling 5,947 my 2005-2007 flhp, flhpi, flhtp, flhtpi, flhpe and flhpei police and escort motorcycles equipped with anti-lock brake systems (abs). Inconsistencies in the routing of the brake lines can cause abrasion of the brake lines...
1994-2007 · 12 model years
Harley-Davidson Flhtpi Problems by year
Owners have filed 5 complaints about the Harley-Davidson Flhtpi across 12 model years, and it has 8 recalls. The 2005 has the most complaints once its age is allowed for (1). The most reported problem area is the brakes, followed by the wheels & tires.
- Complaints
- 5
- Recalls
- 8
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Flhtpi complaints by model year
Highlighted: the year with the most complaints for its age. Older vehicles have had more time to collect complaints - the Safety Index grade allows for that.
Most common Flhtpi problems
Harley-Davidson Flhtpi recalls 8
On certain police and escort motorcycles, the anti-lock brake system (abs) lines may have been reversed during installation procedures.
Certain police motorcycles were built with a defective wiring harness. The antilock brake system (abs ) is wired through the same fuse circuit as the abs malfunction warning light.
On certain dyna, xl, and touring motorcycles, the tail light bulb can fall out of the socket.
On certain touring and police model motorcycles, the 40 amp main circuit breaker can "open" for reasons other than which it was designed, causing an unexpected interruption of all electrical power to the motorcycle.
On certain motorcycles, the clips that retain the wiring for the front fender tip light can become detached from the fender, causing the wires to fray and short.
Vehicle description: motorcycles. The engine cam bolt can lose its clamp load and/or break.
Vehicle description: fl touring motorcycles. A loss of electrical power through the ignition switch can occur due to excessive current and other factors.
Latest Flhtpi complaints
While riding I lost my rear brakes it was discovered the rear brake line had chaeffed threw in two places from routing under the frame there is a recall on bikes with abs but not mine as mine is not abs eqiuped but appears to have the same probem this occuerd while driving at 55 miles per hour and lost rear brakes 85 to 90 miles from home had to have the bike trailered home have installed a braided line so the problem does not occur again harley has not been contacted as off yet as this had just occured while preping for the season I just had this bike inspected at abc harley in waterford mich.
First the rear brake line failed because it chafed through because of a cover made of plastic on the line to prevent rubbing on the floorboard hardware at the factory this did not stop this from chafing anyway. The rear brakes on this harley have always felt a little strange with a soft pedal this month may 2011 the brakes went out again this time because of a problem in the rear brake master cylinder when I took this apart to inspect it was discovered the piston kit installed only had one inlet and one return...
Read the full complaint
port for the fluid the kit to rebuild this was part number 42382-87c this part has two returns ports and one inlet as required I have called harley corp on monday 23rd of may 2011 twice to get info on this part the rep said they would call the dealer where I bought the new part she did not talk to the people who were aware of this problem she talked to two different people who had no info on this problem at all, no one has called me back I again called on the 26th of may and talked to a person there and they stated they would have a rep call me back as they said the dealer couldn't tell them anything about this the reb call and left no message or her name I had to call back and have them check there files to see who it was it was the same rep as on monday they were to have her call be back again as of this time I have not heard anything from harley and no answers to my questions on this matter. *Tr
I own a flhtpi. I applied the front brake on the day listed. I was very lucky that I was only going 4 or 5 miles an hour. The front brake lever moved all the way up to the handle bar at which point the front brakes completely failed allowing the bike to continue to move forward. I pumped the front brake lever several times and got some pressure back. I took the bike the dealer where one front pad was missing from the backing plate and the other came apart while changing the pads. I could have very easily been injured or killed. *Tr
I'm not sure if this is the right section to post this, but I'll try it any way. I received a letter from harley-davidson dated 3/11/08. It was about a recall concerning abs brakes. I made an appointment for the following month 4/12/08. I took the bike in and was told that the parts were on back order. On 4/25/08 I called harley davidson 1-414-343-4056 and was told that they were waiting on a vendor for parts to fix the problem ,and they had no estimated time of arrival for the parts. It has been two months since I received the recall letter . How long should I have to wait for a resolution to this recall? *Tr
Dt: harley davidson 2005 flstsci - springer classic. There is a lot of wheel wobble due to a bent front rim. Consumer unknowingly bought the motorcycle with a bent front rim. An independent mechanic from extended service plan said he could find no road hazard conditions that could cause this wobble. This was more likely caused when the rim was manufactured. This happened when driving at 40 mph, and then again at 80 mph. It is more prevalent at 40 mph, and in a curve or turn. The handle bars will...
Read the full complaint
actually wobble. Also, almost like consumer will loose his grip on them. Consumer tried on three different attempts to have this resolved. The manufacturer was called at least five times. The first time, the manufacturer blamed road hazard. The second time, the manufacturer attributed it to poor maintenance. Third time, it was blamed on poor dealer preparation. Fourth and fifth times it was attributed to poor maintenance. Due to spook adjustment, and 7,000 miles on the motorcycle they were not going to warranty it. Took it back to the original dealer, as indicated in the owner's manual. They took the tire off the rim and found the bend in the rim. They called the manufacturer again and indicated they had found the defect. The manufacturer then wanted a history of maintenance records. The consumer did his own maintenance, and they said they would not warranty the rim because of this. The cost of repair will be around $600. *Ak
Questions about the Harley-Davidson Flhtpi
Which Harley-Davidson Flhtpi years have the most problems?
Which Harley-Davidson Flhtpi years have the fewest complaints?
What are the most common Harley-Davidson Flhtpi problems?
Across every model year, owners report problems with the brakes (4), wheels & tires (1) most often.
How many recalls does the Harley-Davidson Flhtpi have?
NHTSA lists 8 recalls across all Harley-Davidson Flhtpi model years. Each year's page lists the recalls for that year; check your own vehicle by VIN at nhtsa.gov/recalls to see whether the repair has been done.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data