Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Body, doors & structure

Infiniti I30 Body problems by year

26 complaints filed with NHTSA about the Infiniti I30's body, doors & structure. Doors, hoods and latches, frame rust, sunroofs, leaks, trim and structural failures.

Body complaints by model year

YearBody complaintsCrashesInjuriesRecalls
200111100
20005000
19993000
19986000
19961000

Latest I30 body complaints

2001 Infiniti I30SuspensionBody, doors & structureCrash

I was driving along the middle lane in heavy traffic. At the intersection with traffic lights, the lane was stuck in front of me and there was no space to go. In order not to block the intersection, I had to slow down and stop at the traffic lights. While I was waiting at the lights, after 10 seconds the other car came closer without slowing down and hit my car from the behind. I was rear-ended on that incident.

Filed Incident Suspension · StructureNHTSA 11071508
2000 Infiniti I30Body, doors & structure

While working under my car, I noticed that the support structure under the radiator is rusting badly and can be moved by hand. This is not safe and appears to be a potentially dangerous situation. I came across similar complaints about the same model of nissan infiniti. I feel that since this is definitely a safety issue, the company should warn owners and recall the vehicles for repair at no cost to the owners. This is premature rusting and appears to be vital to the engine stability as well. The vehicle was not in motion but I think that is what I hear rattling when encountering bumps.

Filed Incident StructureNHTSA 11066211
2000 Infiniti I30Body, doors & structure

I took my car to the mechanic for a loud noise coming from the hood. The mechanic later found out that the noise was coming from belts because the support bar that hold the engine was sagging. This is called the cross member. I learned that the cross member had rusted prematurely. I have also learned that this is a common issue with every i30 model. Infiniti needs to have these support bars replaced before it causes an accident. Ps. Cross members are supposed to last the lifetime of a car being that this is what holds the engine in place, not rust prematurely.

Filed Incident StructureNHTSA 10818285
2001 Infiniti I30Body, doors & structure

2001 Infinti 115000 miles lower center of radiator support where motor mount is located became rotted out with rust. I noticed it a couple of years ago and wire brushed the rust away and painted it with rust stopping paint but it has only continued to rust and rot. When I search the internet I viewed many pictures from others with the same problem

Filed Incident StructureNHTSA 10722548
2001 Infiniti I30Body, doors & structure

The cross member support under the radiator is rusting out on my 2001 I 30. The car is located in the northeast. Infinity is using low grade metal because this should not happen. *Tr

Filed Incident StructureNHTSA 10621890
2001 Infiniti I30Body, doors & structure

Lower radiator center support and tie bar are very badly corroded.As per ramsey infinity dealer in ramsey,nj.Vehicle is very unsafe to drive.Recommend replacement asap. Infinity customer care rep told me that vehicle is out of warranty and they will not pay for replacement. This is a safety issue.Corroded part is part of body structure.Infinity must advice all owner to inspect this part.They should recall vehicles for inspection and corrective action.. Problem was discover during routine oil change service. *Tr

Filed Incident StructureNHTSA 10618244
2001 Infiniti I30Body, doors & structureEngine & cooling

The core radiator support is rusting out where a support piece holding up the engine is attached. It has rusted almost through and if it rusts through, I was told there would be a large amount of stress on a secondary support for the engine, eventually leading to the engine falling out of place. I read through several forums and this is a very common problem among this model (and its sister model the nissan maxima). This seems like it would be a safety hazard to me if people were not made aware of this and the support for their engine came loose. *Tr

Filed Incident Structure · EngineNHTSA 10547832
1999 Infiniti I30SteeringSuspensionBody, doors & structure

I took my well-maintained, garaged 1999 infiniti i30 to the mechanic after noticing the handling getting sloppy and severe inner tire wear. Upon inspection, he informed me that the front core support (the box beam frame member that extends the width of the car and supports the radiator) was rusted through. The corrosion is severe to the point that the sides of the beam are eaten away over 1/3 to 1/2 the length. In places, all that is left supporting the radiator is the top plate. The center support bar that...

Read the full complaint

holds the front end of the motor in place is supposed to be bolted to the bottom of the beam, but because of the corrosion, it is now hanging cantilevered. The car is not safe to drive with the motor inadequately supported. Relative to the rest of the car, the severe corrosion is localized to a 2-3 foot section of the frame (as if there is something causing the corrosion to accelerate in this particular area). Properly manufactured structural steel should not disintegrate like this. *Tr

Filed Incident Steering · Suspension · StructureNHTSA 10547161
1996 Infiniti I30Body, doors & structure

This is my second infiniti i30 which is the exact same vehicle as the nissan maxima. I currently own a 1996 and have owned a 1997 prior and both had rust in the middle of the lower radiator core support. Over the weekend I looked at a 2000 infiniti i30 for a family member considering purchase and noticed the same problem. After 3 different cars all of different model years I did extensive research and have discovered all over the internet that this is a major problem effecting every nissan maxima and infiniti i30...

Read the full complaint

from the years 1995-2000 regardless of climate or region. The problem has been brought forth in more of a "venting" format and many people did not think to contact the manufacturer directly. This lower radiator support has a lower engine mount brace that screws in, and once it rusts completely, will allow the engine of the vehicle to potentially drop out from beneath and cause a major automotive collision or even fatality. I have been quoted $1200 to rectify the problem, however I do not think I am responsible or should have to pay for a manufacturers defect. Something needs to be done before lives are lost!!!! *Tr

Filed Incident StructureNHTSA 10531719
2000 Infiniti I30Body, doors & structure

2000 Infiniti i30 with approx. 100K miles. The vehicle is used as a spare and is garage kept. Went to get an oil/filter change and found the frame under the radiator is completely rusted and is actually sagging. It looks like this part of the frame supports the engine mount that's located near the radiator also. Needless to say, this is very unsafe. The rest of the vehicle is in very good condition considering the age of the vehicle. I got an estimate of approx. $1,000 To replace the rusted part of the frame. Searching online, it appears the vehicles built on this chassis have similar rusting frame issues. *Tr

Filed Incident StructureNHTSA 10508963
2000 Infiniti I30Engine & coolingBody, doors & structure

I have a well maintained 2000 infiniti i30 with 168,000 miles . The car has never been in an accident. Approximately 2009 the lower radiator support (front cross frame tie bar) started to rust near the center of this boxed frame member. Portions of the top and front side of this frame member rusted through completely some time in 2011. The hood latch mechanism and horn are fastened to a vertical steel support that is bolted to the front of this frame member, just left of the rust perforation. I intend to drive this...

Read the full complaint

car for many more years as we have in the past with several other cars if this does not become a safety problem, . I will need to have the front frame tie bar repaired if possible to avoid future hazardous conditions (ie. Hood popping open while driving and/or unstable front end control). This rust perforation more than likely lessens the structural integrity of the car in a front end collision. This appears to be a widely known safety problem on various nissan autos. Even if nissan is not required to recall these autos for inspection and repair, they should at least notify owners of the potential safety issues and possible mechanical fixes that should be considered by the owner. *Tr

Filed Incident Engine and engine cooling · StructureNHTSA 10507246
2001 Infiniti I30Body, doors & structure

This well maintained 2001 infiniti i30 with 74,000 miles has been driven for approx. 11.5 Years by the original owner and spouse in the cincinnati area. The car has been garaged 99% of all evenings during that time and has never been in an accident. Approximately 2008 the lower radiator support (front cross frame tie bar) started to rust near the center of this boxed frame member. Portions of the top and front side of this frame member rusted through completely some time in 2012. The hood latch mechanism and...

Read the full complaint

horn are fastened to a vertical steel support that is bolted to the front of this frame member, just left of the rust perforation. We intend to drive this car for many more years as we have in the past with several other cars if this does not become a safety problem, if it hasn't already. My guess is we will need to have the front frame tie bar repaired if possible to avoid future hazardous conditions (ie. Hood popping open while driving and/or unstable front end control). This rust perforation more than likely lessens the structural integrity of the car in a front end collision. I have never in my 35+ years of car ownership encounter such a manufacturing defect. This appears to be a widely known safety problem on various nissan autos. Even if nissan is not required to recall these autos for inspection and repair, they should at least notify owners of the potential safety issues and possible mechanical fixes that should be considered by the owner. Thanks in advance for your assistance with this matter.

Filed Incident StructureNHTSA 10506092
2001 Infiniti I30Body, doors & structure

When I took my car in for service my mechanic noticed excessive rusting on the frame below the radiator. It is the only place on the entire car underbody with rust. The metal bar is almost completely rotted through, and my mechanic said the car is unsafe to drive - if I hit a pothole or a bump the bar will crack and the engine/radiator will lose support. My car only has 114,000 miles. It's 12 years old. Only one spot on the car has the excessive rust that is eaten through. This sounds like nissan did not rustproof one section properly, and should be investigated. *Tr

Filed Incident StructureNHTSA 10475883
2001 Infiniti I30Body, doors & structure

Radiator core support is rusting at an unusually rapid rate. This is also the front mount for the engine. When this finally breaks it is likely the engine and cooling system will suffer. There is no rust anywhere else on the vehicle. Note: this car is structurally and mechanically identical to the nissan maxima of the same year, and many of said car are suffering the same issues. *Tr

Filed Incident StructureNHTSA 10468410

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience