Kawasaki Motors Corp. is recalling certain model year 2013 EX300BDFAL motorcycles manufactured August 16, 2012, through April 2, 2013. Due to a manufacturing error, the Anti-Lock Brake System (ABS) may malfunction and lose anti-lock functionality.
2013-2013 · 1 model year
Kawasaki EX300 Problems by year
Owners have filed 14 complaints about the Kawasaki EX300 across 1 model year, and it has 1 recall. The 2013 has the most complaints once its age is allowed for (14). The most reported problem area is the engine & cooling, followed by the fuel system.
- Complaints
- 14
- Recalls
- 1
- Crashes
- 1
- Fires
- 0
- Injuries
- 1
- Deaths
- 0
EX300 complaints by model year
Highlighted: the year with the most complaints for its age. Older vehicles have had more time to collect complaints - the Safety Index grade allows for that.
| Year | Complaints | Recalls | Grade |
|---|---|---|---|
| 2013 | 14 | 1 | - |
Most common EX300 problems
Kawasaki EX300 recalls 1
Latest EX300 complaints
Tl* the contact owns a 2013 kawasaki ninja ex300adfl motorcycle. The contact stated that while driving approximately 55 mph and decelerating to 35 mph, the handle bars would shake excessively. The contact took the vehicle to the dealer but no repairs were performed. The manufacturer was made aware of the failure. The failure mileage was 800.
Pulling in the clutch causes the rpms to drop below 1000 rpm causing the engine to die or stall. This happens frequently. It can occur several times in a row or it can be several days before it happens again. I've tried to increase idle speed to 2000 rpm, manufacturer recommends 1300, which did not help. I would estimate it has occurred 50+ times since I purchased the motorcycle new on june 28, 2013. *Tr
Purchased my ninja 300 3/25/13. Signs of first wobble due to poor head bearing was on 4/10/13. That's only 15 calendar days! My ninja 300 wobbles from decel from 50mph to 35mph. The wobble is so bad, I can't really ride the bike anymore until I get it replaced, and kawasaki won't honor a head bearing replacement under warranty. They would simply replace it with the same stock poor quality part resulting in another head bearing failure after 600-1000 miles. This issue has become very frustrating to me because I now...
Read the full complaint
have to pay out of pocket for a part on a brand new bike still under factory warranty. This needs to be addressed, and for the customers paying out of pocket, need to be refunded the price of the part and labor due to a factory defect / choice of poor quality bearing. *Tr
I bought a brand new ninja300 for my wife, with no problems riding it home. The next time out, which was a couple of days later. I warmed up the bike as I usually do. Rode just down the street, while in 4th gear I pulled in the clutch to down shift and the bike just died. Didn't think much of it, but it happened again the next day, so I increased the engine idle a bit thinking this would help. The issue was not resolved. So I did some reading on forums and found this is common. So again didn't think much of it and...
Read the full complaint
definitely hadn't even thought of this as a safety concern but after realizing how this may be a potential disaster, I'm hesitant to let my wife ride it knowing she may be at risk at any given time. I think this should be recognized, acknowledged and continue investigations until kawasaki can realize the potential hazards and take appropriate actions. *Tr
After parking my motorcycle in the sun for about 2 hours I returned and started it up. Everything appeared normal. I accelerated to about 15 mph and then as I prepared to come to a stop I started braking and pulled in the clutch. The engine rpm's dropped lower than the idle speed and the engine stalled as the bike was still moving. I coasted to a stop. I placed the bike in neutral and restarted the motor. It started up fine and I continued on to an intersection where I attempted to make a u-turn. There the...
Read the full complaint
bike stalled on me again while in the middle of making the u-turn as soon as I pulled the clutch in. I barely escaped being rear ended by a suv that was also making the u-turn and that did not expect me to come to sudden stop in the middle of the intersection. I immediately tried to restart the engine meanwhile I had two other vehicles stuck behind me blocking the intersection from oncoming traffic. The engine stalled again at the next stop light. After about 2 or 3 miles of constant movement did the issue go away. This same problem has occurred several times since then and always after the motorcycle has sat in the sun for several hours. It never occurs in the morning on a cold start and when it does occur it goes away after a couple miles of riding. *Tr
When coming to a stop with clutch disengaged engine stalled and had to be restarted. Luckily no traffic was behind me or I might have hit from behind. *Tr
Questions about the Kawasaki EX300
Which Kawasaki EX300 years have the most problems?
By the number of complaints owners filed with NHTSA: 2013 (14). Allowing for how long each has been on the road, the 2013 stands out most. Complaint counts also rise with sales, so compare years of the same model rather than different models.
What are the most common Kawasaki EX300 problems?
Across every model year, owners report problems with the engine & cooling (8), fuel system (5), transmission & drivetrain (4) most often.
How many recalls does the Kawasaki EX300 have?
NHTSA lists 1 recall across all Kawasaki EX300 model years. Each year's page lists the recalls for that year; check your own vehicle by VIN at nhtsa.gov/recalls to see whether the repair has been done.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data