Without any warning lamps,The vehicle started pulling left when the brakes were applied a certified mechanic looked at it and feels that is the due to a defective DSC/ABS control unit. The unit hasn't been otherwise inspected but is available for inspection
Brakes
Mini Cooper Roadster Brake problems by year
10 complaints filed with NHTSA about the Mini Cooper Roadster's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.
Brake complaints by model year
Latest Cooper Roadster brake complaints
The proportioning value that controls brake function had a catastrophic failure and caused the brake calipers especially the left front to lock suddenly. The caused the left front wheel to lock and caused the car to pull hard to left and become difficult if not impossible to control. The car pulled hard left and risked the car moving uncontrollably into on coming traffic. The failed part was saved and is available for inspection. The safety of the driver(my wife) was put at risk during the loss of control of...
Read the full complaint
the car. Other cars in the area were also put at risk simply due to the loss of control of our car. The problem was confirmed by the independent service center. The vehicle was not drivable and was towed to the dealership. The dealership thought the root cause was the brake master cylinder. This turned out not to be the case. The root cause was the failed proportioning valve. This caused the calipers to lock. The discs, rotors, calipers and proportioning value were replaced. There were no warning lights and the car had been taken for regular service at the dealership which was included in the purchase of the car. We were told that there is no warning light for a failure of this part.
Handbrake harness not routed as designed. From the picture you can see the harness not inside the clip. This makes the handbrake harness short from point to point. Which will lead to my rear passenger side brake always on. And also, it will cause a serious safety issue if I want to use my handbrake to stop my vehicle. The force applied on passenger side is way more than drive side ( it was installed correctly ) . And it may lead my passenger side handbrake wiring harness broken ( because of the incorrect routing...
Read the full complaint
) I found it out when my brake light in on. My front brake still working for another 1100 miles while my rear brake sensor tell me I need to change my brake . We change the rear passenger brake and found out its difficult to clip the handbrake wiring harness to right hole. Then we track the wiring done. It's shocks me . The routing is 100% incorrect. You can see the correct handbrake hole is empty.
Tl* the contact owns a 2015 mini cooper. The contact stated that the brake sensor warning indicator illuminated, but there was no brake failure. The vehicle was taken to habberstad bmw (945 e jericho turnpike, huntington station, ny 11746) where it was diagnosed that the brake sensors needed to be replaced. The manufacturer was also contacted and declined to assist. The vehicle was not repaired. The approximate failure mileage was 58,000. *Tt *tr
Tl* the contact owns a 2015 mini cooper. While attempting to unlock the trunk with key fob, the trunk failed to unlock. The contact started the vehicle in the hope that it would unlock the trunk. When the contact began to walk towards the rear of the vehicle, it began to roll despite the emergency brake being activated. The vehicle continued to roll over a large curb and landed into the foundation of a neighboring home. The vehicle received damage to the rear bumper and undercarriage. The contact was able to drive...
Read the full complaint
the vehicle back home. The contact stated that the brake and drive train warning indicators were illuminated. The contact notified the insurance company and dealer. The dealer was unable to identify the cause of the failure. The vehicle was not repaired. The manufacturer was not made aware of the failure. The vin was unknown. The approximate failure mileage was 14,000.
I made a right turn from the main street, into the parking lot of a strip mall, then an immediate left turn, and another right turn into the right angle parking slot. All the while having my foot on the brakes, I started to shift into park, when it was in the right spot. The mini instead coming to a stop, revved up, jumped the curb and hit the store in the front. The air bags deployed. I had my foot on the brakes really hard, all the time but the brake pedals were locked up. It would not move up or down. Sat hard...
Read the full complaint
on the floor! When the tow truck came, the brakes were still locked up and the gear was in park and couldn't be moved from there. The seat belts couldn't be retracted either. Mini engineer claims that there is nothing wrong with the car and I can safely drive it after the body is repaired. I am having a difficult time with this conclusion. The car's brakes and gear were locked up, and had to be lifted on a flatbed and taken to the repair shop; I still maintain something within the car malfunctioned. *Tr
Driving 45 mph on busy city four-lane road, I braked gradually in approach to red light, which is my normal braking style. Car did not come to a complete stop--brakes only worked to a point but did not completely stop car; simultaneously engine revved to very high rpm. I threw transmission into park and turned off ignition lest my car ram car ahead of me. Very frightening. At previous two lights I had noticed that brakes were acting funny, not bringing car to a complete stop but I had left plenty of braking...
Read the full complaint
distance and was able to let car roll to a stop, in spite of brakes not effecting a complete stop . At those two lights the runaway engine (high rpm) did not occur or I would have pulled over right then. However, engine revving to high rpm has also occurred occasionally when pulling into garage but I had not given this a lot of thought because I have quickly turned off ignition. Now I know it's very dangerous situation. Of course I am not driving it but am having it towed to dealer for repair. The car has been serviced regularly at dealer and has 24,239 miles on it. There has never been a necessity for repairs on this mini cooper clubman.
I purchased my mini countryman on february 14, 2015 from the local mini dealership. At approx. 1447Miles, 7 month into ownership, I began having trouble when turning on the car (the car was stationary) the warning lights came on for brakes, abs and traction control and remained on until car was turned of repeatedly or diven for a mile and then turned of. I took my car back to the dealership for repairs on: 10/02/2015 no faults in the electrical system was found and I was asked to return when it reoccurs. ...
Read the full complaint
12/03/15 A fault memory and faulty r/f wheel speed sensor was diagnosed, sensor was not in stock. 12/04/15 I returned with my car to have the faulty wheel speed sensor exchanged. 12/05/15 To 12/10/15 faulty relucter wheel on the r/f wheel hub, wheel speed sensor readings off, signal scoped and r/f wheel hub replaced. 12/28/15 And ongoing. On 1/05/2016 mini usa has given me verbal assurance that I will get the car replaced with a new mini of my choosing.
Coming up to an intersection, the car started to slow normally. Then the abs kicked in and the car did the shudder like when the abs is active. Then the abs turned off and the brakes went spongy. The car rolled into the intersection through the stop sign. This happened several more times. We brought the car to mini of austin in texas. They couldn't find anything wrong. No codes were thrown. My wife too the car back, and drive back to salt lake city, utah. She experienced subsequent identical brake...
Read the full complaint
failures. We took the car into mini of murray. They have had the car a month, and cannot duplicate the issue. Corporate mini will not authorize any part replacement at all. They want us to take the car back. I don't feel that is a smart or safe idea.
Tl*the contact owns a 2012 mini cooper. The contact stated that while driving at an unknown speed, there was a hissing noise. The vehicle was taken to a dealer who stated that it was due to salt and should go away over time. However, the failure persisted. The vehicle was taken to another dealer. The technician diagnosed that the brake pads and rotors needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was unknown but the current mileage was 18,954.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data