Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2002-2007 Lancer, 2004 Lancer Wagon, 2003-2006 Lancer Evolution, 2003-2006 Outlander and 2007-2013 Outlander V-6 vehicles originally sold in, or ever registered in, Connecticut...
Suspension
Mitsubishi Lancer Evolution Suspension problems by year
17 complaints filed with NHTSA about the Mitsubishi Lancer Evolution's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Suspension recalls
Latest Lancer Evolution suspension complaints
The vehicle's right front lower control arm is no longer secured to it's inner rear mounting location at the front crossmember. This condition allows for unintended movement of the right front wheel and was caused by structural failure of the front crossmember at the control arm to chassis attachment point due to corrosion exactly as described in SR-20-003REV_2. SR-20-003REV_2 only applies to certain earlier model year vehicles of the same type and design (Lancer model years 2008-2010). Later model years...
Read the full complaint
2011-2015 are not mentioned in SR-20-003REV_2. The subject of this complaint is a 2013 Lancer Evolution. SR-20-003REV_2 should be expanded to include newer model year vehicles as the remaining fleet continues to age and deteriorate. A Mitsubishi dealer has confirmed the problem. Repair estimate out of pocket cost exceeds $5500.00 (replacement parts plus 25 hours labor). The vehicle is now considered unsafe to operate on public roads and must be towed away from the dealer.
The subframe on a 2014 Mitsubishi Lancer with 57,000 miles on it has rusted and cracked. This seems identical to NHTSA campaign number: 20V-279 but this year/make is not covered under recall. I have pictures and a video taken by Conrad's as they are doing the replacement. I attached the photos but the video is to large, so here is a link https://photos.app.goo.gl/akY1TzhF6SXRSJFs7
The contact owns a 2011 Mitsubishi Lancer. The contact stated that while having the vehicle inspected, the front crossmember was corroded. The dealer was not notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 72,000. Consumer called the local dealer back for an estimate, part to be replaced and was given $1150.19. Dealer would get the parts in a week.
Vibration of the steering wheel when driving over 60 mph. Persist after changing tires, wheels, brake pads and discs. This shaking makes the car unstable and is a safety issue.
Rear subframe where the rear differential and suspension bolts onto is rusted, just like the front subframe . Many owners 2003-2006 mitsubishi lancer evolution owners are having this same issue. Mitsubishi recently issued a recall on the front subframe due to rust. The rear subframe is also a concern and is worst than the front.
The rear subframe of my vehicle exhibits significant corrosion perforation where the rear axle and suspension mounts to the body. The rust is so bad, that I'm worried if I hit a pothole the entire rear subframe assembly / control arms could detach, resulting in an accident. The vehicle has been incredibly well maintained, has always been washed throughout the winter months (undercarriage), and the body does not show any rust. I have not been involved in any loss of control, etc ... Just concerned this could...
Read the full complaint
happen. My vehicle had the front subframe replaced last year (recall) due to rust perforation and lack of corrosion protection from the factory and the potential for the front control arms to detach resulting in an unsafe condition. I see the same potential for the rear. Also please note, the photos I'm attaching are not from my vehicle, but they are nearly identical to the areas of concern on my vehicle (and are from the exact make / model vehicle). I'd be happy to attach similar photos from my vehicle if needed, but again, they show the same amount of rust in the exact same areas.
Son was driving vehicle rear ended a vehicle, at 35 mph, rolled mitsubishi 8 to 9 times, sled on roof about 50 feet before coming to a stop up side down. Airbags never deployed. Not even when the tow truck flipped car right side up.
Tl* the contact owns a 2005 mitsubishi lancer evolution. The contact received notification of nhtsa campaign numbers: 15v321000 (air bags) for the front passenger seat air bag inflator and 16v458000 (suspension) for the lower control arm. The parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the issue. The contact had not experienced a failure. Parts distribution disconnect.
Tl* the contact owns a 2005 mitsubishi lancer evolution. While driving various speeds, the vehicle became very unstable and pulled to the left. The vehicle also experienced severe oversteering when turning. It was discovered that the front lower control arm was faulty due to corrosion and rusting of the subframe. The dealer repaired the vehicle per nhtsa campaign number: 16v458000 (suspension) in which an anti-corrosion agent was applied, but the failures continued. The manufacturer was notified. The failure mileage was 187,000.
Lower control arm loose / disconnected from subframe, causing stability and control problems with the vehicle resulting in unsafe operation at any speed and at any time which the vehicle ia being operated.The socket on the subframe has deep rust and an irregular hole visible. Bob penkhus mitsubishi refuses to perform the recall which addresses this issue of corrosion of the subframe, specifically where the lower control arm attaches to the vehicle.
My car was recently wrecked going around the corner in the snow is it slid off the road into a telephone pole and the fire hydrant the airbags did not go off when we impact we were doing about 40 miles per hour. The car also did not turn itself off like it should have. *Tr
Tarmac icon blinks incessantly on the display panel, as one drives. The blinking can cause photosensitive epilepsy (pse), which is a form of epilepsy seizures triggered by visual stimuli that form patterns in time or space, such as flashing lights, bold, regular patterns, or regular moving patterns. I found out later, the blinking is an indicator the acd pump - active center differential - is failing and it's only a matter of time before the component completely gives out. Many, many individuals from the...
Read the full complaint
community experiences the acd pump failure due to design and placement of the component in an inopportune location. As such, corrosion from moisture and salt deposit on the road can easily infiltrate into the pump component, causing failure in due time. Further poor sealing, lack of weather protection (anti-corrosion spray) and poor placement all contributes to the systematic, premature failure of a $1500 pump. *Tr
Spring seat broke at weld joint to shock tube. Spring translated in the z direction until it was in direct contact with the tire. Upon breakage vehicle had extensive spring rubbing against tire. *Tr
On monday 2013 april 22 I [[redacted]] (owner of vehicle) was getting off my shift at approximately 0700 hours from bethel twp pd; where I work as a patrolman. The temperature was fairly mild 60-65f, I started my 2008 mitsubishi evolution 10 to let it warm up like I always have for approximately ten minutes. I put my evo in gear and on the center l.E.D. Screen I received the c161 message which indicates s-awc failure or super all wheel control. This effects everything with the cars' suspension stability, yaw...
Read the full complaint
control, and the "smart breaking" feature. For an un-experienced driver this could be catastrophic. Knowing the importance of this I was forced to bring the car to springfield mitsubishi in springfield, pa. 1(484)574-8434. Now I'm stuck with a $2132.00 Bill and the car is still in the lot because I don't have the $2132.00 To "shell" out. I went to two separate forums www.Evoxforums.Com and www.Evolutionm.Net, and I don't know whats scarier the thousands that have this problem and are told by their local dealer its safe to operate in that condition or the fact that no body is doing anything to assist or fix the problem. Please be the ones who make the difference here..... Thank you [[redacted]] ps I apologize I am writing you again, I never received any response the first time....... Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
I believe the outer tie rods on 2008-2012 mitsubishi lancer (all models) are defective. I had the pass side fail at 20k miles., Which was replaced by dealer. It took over a year of diagnosis, increased noises, and eventual unsafe handling before the second one- drivers side was diagnosed and replaced, this time by an independent shop. I had to personally pay to have the second one replaced because the dealer was unable or unwilling to reproduce and replace after numerous inquiries. I have video of the ball joint...
Read the full complaint
upon removal from the idler arm, and the joint is absolutely destroyed. Surprisingly, it does not exhibit much play when mounted, and the ball joint rubber looks ok. It would be very easy for a cursory inspection to come up with nothing, even when the joint is dangerously near failing. Not only do I believe that the part is prone to failure, but I don't think it is safe even when new. I noticed the vehicle had unusual steering since I bought it, that caused it to dog track and drift in and out of lane. I tried a variety of ways to improve, including new tires, sold by dealer, passenger side tie rod replaced. None addressed the steering issues, until I replaced with aftermarket moog outer tie rods after finding the drivers side tie rod defective. I have also inquired with other owners, since I am a member of a lancer forum. Many also seem to have the same problems. Either they have had them replaced under warranty, or the dealer was unable to identify. It is possible that many of these vehicles are on the road today with tie rods that are damaged or destroyed. Considering that the failure of these parts eventually leads to dramatic understeer, and sliding out of the front end, while stability control doesn't engage, this situation could easily cause an accident. Please contact me if you need a video of the defective part in question. Thanks. *Tr
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data