Nissan North America, Inc. (Nissan) is recalling certain 2020 Nissan Murano, INFINITI QX60, 2021 Nissan GT-R, INFINITI QX50, and Q50 vehicles. The front steering knuckle or rear axle housing may have insufficient strength due to improper heat-treatment.
Suspension
Nissan Murano Suspension problems by year
234 complaints filed with NHTSA about the Nissan Murano's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Suspension recalls
Latest Murano suspension complaints
Component Affected: SUSPENSION: FRONT: CONTROL ARM: LOWER ARM Description of Defect: My 2020 Nissan Murano experienced a severe front suspension failure matching the exact structural symptoms described in Nissan Recall Campaign PC797 (NHTSA Campaign Number 21V170000) for defective front transverse links/lower control arms. The vehicle exhibited a loud popping and clunking noise coming from the front end, occurring primarily when applying the brakes and coming to a stop as the vehicle's weight shifted forward. A...
Read the full complaint
professional diagnosis confirmed a failing front lower control arm and ball joint, creating a structural failure and an immediate risk of component separation, which threatens a total loss of steering control. This safety defect first manifested as a persistent noise last year while the vehicle was still well under the 84,000-mile mark when I took it in to have my transmission fluid changed. However, I thought it pertained to my front brakes and the repair man said when he drove it, he didn't hear the noise. But I continued to hear the noise when I braked in the front area. So, when I recently checked my 17-digit VIN on the official recall portal, after the inspection of my vehicle during an oil change, is when I was told about the front suspension. My vehicle shows "0 Open Recalls." Nissan Corporate Consumer Affairs refused to offer assistance or a goodwill repair due to the current mileage (99,488 miles), stating my VIN was excluded from the campaign. Because my vehicle is experiencing the exact structural defect, manufacturing flaw, and safety risk outlined in Campaign PC797, I am filing this complaint to urge the NHTSA to investigate and mandate an expansion of the recall footprint to include excluded VIN blocks. I have paid $680 out-of-pocket to Torrance Motors to replace the defective control arm and perform a mandatory wheel alignment to keep the vehicle road-safe. I retain all itemized repair receipts for future reimbursement verification.
Component: Suspension: Front: Control Arm Incident Description: State that both front upper control arm bushings suffered severe structural tearing at ~53,800 miles. This was identified when tires were being replaced on August 25th or 26th 2026 I reported the issue to Nissan Consumers and it was inspected by Nissan dealer on August 27th 2026.
No electrical works in this car. He may be driving and it just stalls. He pulls over for a couple of minutes and tries to go and it just keeps dying.
The contact owns a 2020 Nissan Murano. The contact stated that while driving at an undisclosed speed, the vehicle was driving unstable. The vehicle was taken to an independent mechanic, and the suspension was inspected. The mechanic became aware of cracked bushings on the upper control arm on both sides of the vehicle. The independent mechanic performed an alignment; however, after the alignment was performed, the steering instability and handling failure persisted. The vehicle was not repaired. The manufacturer was not notified of the failure. The contact associated the failure with NHTSA Campaign Number: 21V170000 (Steering); however, the VIN was not included in the recall repair.
My tire light is on a my 2012 nissian murano. It flashes at startup, with the light on, telling me I have low tire pressure. I put air evenly in all four tires. The light still remains on; how can all four TPMS go bad? I wouldn't know if i have a leak or low pressure due failed TPMS. My check engine light is on due to air/fuel ration on bank 1 sensor 1. This issue is causing poor fuel economy and filing emissions.
The contact owns a 2020 Nissan Murano. The contact stated while the vehicle was at Now Auto Care for a service appointment, the contact was informed that the driver's and passenger's side control arms were unusually worn and failing. The contact was advised to take the vehicle to the dealer. The manufacturer was made aware of the failure and a case was filed. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 85,960.
Summary of Incident: On August 16, 2025, while my daughter was operating the vehicle at approximately 35 MPH, the front driver-side wheel detached entirely from the vehicle, resulting in a catastrophic loss of control and the vehicle being declared a Total Loss. Technical Details & Safety Hazard: The vehicle had undergone a comprehensive wheel and brake service at a licensed dealership, Ron Tonkin Hyundai, in Gresham, Oregon, 39 days (approx. 600 miles) prior. Post-accident inspection by an independent tow...
Read the full complaint
operator and mechanical review revealed: *A sheared wheel stud on the failed hub, which dealership service management later admitted was "likely over-torqued" during service, leading to latent metal fatigue. * A systemic failure of wheel mounting: Lug nuts on the other three remaining wheels were found to be loose or missing. Safety Risk: This incident represents a critical safety failure. The detachment of a wheel at speed poses a life-threatening risk to the occupants and other motorists. The systemic nature of the loose hardware suggests either a failure in service procedures, a defect in the lug/stud hardware compatibility, or improper torque specifications being applied to this model. I am reporting this to ensure a record of this structural failure is maintained should it be part of a larger pattern of hardware fatigue or service negligence.
Was told by coggin nissan that my front control arms are cracked and need to be replaced. Car only has 64k miles on it I bought it new. Found cracks when car was serviced. 9,12,2025
Claim #11682497 follow up I'll be attaching documents below
Subject: Vehicle Safety Complaint - 2020 Nissan Murano, VIN [[redacted]] Dear NHTSA, I am submitting a formal Vehicle Safety Complaint regarding my 2020 Nissan Murano (VIN: [[redacted]] ) due to unresolved safety defects that match existing recalls. I have been notified of two recall campaigns affecting my vehicle model: 1. NHTSA Campaign 21V402000 (Steering knuckle/rear axle housing defect). 2. NHTSA Campaign 21V170000 (Transverse link/ball joint defect). Despite these active recalls being published in NHTSA's...
Read the full complaint
database, Nissan Consumer Affairs has denied that my VIN is included, even though my vehicle is exhibiting the exact safety defects described: [insert brief description of your issues, e.g., steering instability, noises, or loss of control symptoms]. I have already provided Nissan with: - NHTSA campaign numbers - Recall notifications received through the Kelley Blue Book app - Documentation of my safety concerns Nissan has failed to provide a resolution. I request that NHTSA investigate whether additional VINs should be included in these recalls and ensure Nissan fulfills its obligations to correct these safety defects. I am prepared to supply copies of all recall notifications, correspondence with Nissan and, documentation of my vehicles defects upon request. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
We bought our 2009 Murano new back when we were expecting our baby cause it was rated one of the safest suv on the market. For the most part besides some brake issues and the steering linkage that I had scheduled to have replaced last month its treated us well. Last month with our now [[redacted]] old daughter I took it to go to a concert an hr from our house. On the highway I felt it swaying which I found weird cause it was swaying from the rear of the vehicle not the front where the linkage is. We drove home...
Read the full complaint
slowly and the next day I dropped it off at our mechanics to have the linkage replaced and asked him to check out the sway I felt. He immediately called me after he got it on the lift and said I needed to head to the shop that our suv was JUNK! When I got there I could not believe my eyes and thanked God that I and even more my daughter made it home safely. My mechanic of 35yrs in business said we were lucky we didn't end up in the woods on the highway and that the entire rear k member/ frame is completely rotted out and the rear tires could have flown off at any moment. I have read that there is a recall on this issue but not in the salt belt states. That is ridiculous and is an excuse to not have to back your vehicle. We live in Dartmouth MA and have barely had any snow in the past 10 yrs to salt for and even if we had this hasn't happen to any other vehicles we own. 2003GMC, 2006 Saab and my wifes Jeep all gd. Whats the point of getting a safety check during the annual inspection when you know your frame is junk and its a death trap!How in good faith can you not back your products when this is clearly a major issue. Nissan needs to do the right thing and take care of the people who have taken care of them by buying there vehicles. This vehicle has always been meticulously maintained, washed constantly at car wash with the extra fee of undercarriage spray for what when its rotting from the inside out as you are aware off. Make it a recall before people get killed! INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The rear subframe has rusted through due to road salt and made the vehicle unsafe to drive
My 2020 Nissan Murano sl has 35k miles and the rear shocks are defective. The defect has already ruin a new set of tires with humps. This should be a manufactured recall.
Slowly over time it is becoming harder to turn the wheel, making a loud clumping voice when I turn the wheel a certain direction.
Rear subframe where it connects to shock mounts is completely rusted through at both sides of the car. Causes the tops of the wheels to bow in and is undrivable
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data