Dt*: the contact stated while turning the steering wheel from side to side there was a rubbing noise followed by steam pouring from under the hood. Also, the strong odor of oil was present. The vehicle was taken to a dealer for inspection. The dealer determined the power steering hose rubbed into a mounting bolt which resulted in a power steering fluid leak. The service department replaced the power steering hose and fluid.
Steering
Oldsmobile Cutlass Ciera Steering problems by year
36 complaints filed with NHTSA about the Oldsmobile Cutlass Ciera's steering. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
Steering complaints by model year
Latest Cutlass Ciera steering complaints
1995 Oldsmobile aurora, gm's real winner here!!! Where do I start? We have been dealing with over heating problems, and have changed water pumps, radiator, radiator flushes, thermostats, a handful of alternators, twice the a/c seized, major vibration at high speeds and stopping, caused? Over heated disk brakes! Its a really nice car; we love it, but just can't see the end to this foreseeing waste of cash. Our family members have all pound this car around, can't bear giving it up, especially after investing so much....
Read the full complaint
Shifting in reverse can have you slapping it in drive seeing the chiropractor from the sudden jolt. Problems with steering wheel, is loose as a goose, leaking fluids from unknown places that seem to disappear when getting them serviced? Engine mounts in need of a 2nd replacement overheating is an erratic problem, along with the irregular idles. These issues are all stemmed from the really bad design plans, giving us these problems that never really get fixed. The cause, major internal overheating! Promoting massive melt down on our precious baby northstar makes one expensive aluminum paper weight. No mechanic shop will fix our engines, why? Liability, the bad design has proven this (it does not work!). The poor design was evident to gm way before the factory started throwing them together. They just added bandaids on the most crucial aspect they needed further development; these low attributes have left us short changed holding a bag of safety and financial burdens. Take a look at this nhtsa odi numbers; 8010002,10003769,10028708,1005387, 10057594,10063987,10069013,10069679,10070352,10071397,10094331, 10094992,10101048,10120403,10121459. This is just a fraction of the problems, that??S why a mechanic will not touch your engine, but will only exchange for a brand new one cost of around $8,000.00, And oldsmobile, well as you know. Bailing out. Thanks gm for the nice kick in the pants. *Jb
Steering wheel moved while being locked in position. When the vehicle was inspected, it was determined that it was due to loose bolts. *Ak when negotiating a corner, the engine ignition switch inside of the steering column disconnected, the engine stopped, the power steering and the power brakes failed. The steering wheel wobbled from side to side. *Sc
While driving 10 mph consumer heard a loud knocking noise coming from the front. Suddenly the vehicle lost power steering. However, consumer was able to maintain control of the vehicle, and pulled over. Vehicle was towed to the dealer for inspection. Mechanic determined that the cradle bolts and retainers needed to be replaced. *Ak.....All steering was lost not just power steering. With no control, vehicle moved to the next lane. Driver had no steering, only could use brakes. Dealer bought it for $500.00 To gert vehicle off road.F this vehicle wa sgoing a thighway speed, the driver or another driver could have been killed. *Ak
Consumer complained about a steering problem. While driving at a moderate speed and making a turn it became very difficult to steer. When vehicle was halfway through the turn,it veered, and landed in the next lane. Also, this was the second engine installed in this vehicle. *Ak this problem caused the tires to wear. *Sc
When turning steering wheel to the left vehicle went to the right. A recall was issued to replace the lower pinion bearing. Dealer stated that rack and pinion steering needed to be replaced, but consumer's vehicle was not covered under the recall due to vin. *Ak
While driving the steering bolt became lose which caused the steering wheel to jump around. Which made it difficult for the consumer to steer the vehicle. *Nlm the steering knuckle ripped out and the cradle broke causing everything under the hood to fall out. The cradle had to be replaced. *Tt *jb
While vehicle was parked, steering wheel would lift up or down without using steering adjustment. Vehicle was taken to the dealership which did not resolve the problem. *Akwhile in motion, consumer had to brake suddenly, putting pressure on the steering wheel. Consumer heard a pop and the steering wheel started to lift up and down without the use of the adjuster lever. *Jg
Smoke was pouring from vehicle when it was started up, melting the wires. Switchs in steering column were replaced 2 years ago due to the same problem. The dealer was notified. Please provide more inforamtion.*Ak
When using air conditioning, alternator goes out and kills the battery. Had 4 alternators and batteries replaced. Took to dealer who indicated engine was too big for alternator also causing engine to stall, engine cooling fan replaced, power steering pressure hose failed and replaced, rearview mirror fell off, ceiling fabric coming unglued and dashboard vent cover coming off. *Ak *tt
The consumer was in an accident due to the engine cradle bolts and steering collapse while driving. Owner's vehicle was not covered under recall 97v-058000 due to mileage. Owner claimed never received recall notice. Vehicle wa sinvolved in an accident, and incurred damage. Complaint listed under anothet name.*Yh
Tie rod end is popping while driving. Dealer notified. Feel free to provide any further information on this matter.*Ak
Vin [[redacted]] I am denied my safety recall from gm 313-875-0300.*Ak information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
While driving steering wheel failed, causing loss of control due to a corroded front frame cradle bolt. Please give any further details.*Ak
Whenever key was removed from ignition switch, steering wheel would fail to lock up. Also, alarm system would start to sound off. Would have to turn off alarm & then the vehicle would not start up again. *Ak
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data