Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Engine & cooling

Porsche 911 Turbo Engine problems by year

35 complaints filed with NHTSA about the Porsche 911 Turbo's engine & cooling. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.

Engine complaints by model year

YearEngine complaintsCrashesInjuriesRecalls
20171000
20153000
20131000
20121000
20101000
20091000
20084000
20056000
200117000

Latest 911 Turbo engine complaints

2017 Porsche 911 TurboEngine & cooling

While driving 40 miles per hour a sudden explosion happened with no warning. Thought it was the engine due to the smoke coming out of rear of the vehicle but realized that engine was still on and steam was coming out. All coolant drained out of vehicle and on road. Vehicle was towed to a Porsche dealership in Duluth Ga. The coolant tank exploded causing minor body damage and sudden loss of all coolant. The dealer replaced the shattered coolant tank but found no cause as to why the pressure got so high to cause the tank to explode. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Incident EngineNHTSA 11689476
2015 Porsche 911 TurboElectrical systemAcceleration & cruise controlEngine & cooling

The pcm unit which controls the cars computers keeps shutting on and off saying do not drive. Get service ..... This has happened on many cars and there was a class action suit regarding a recall. It is now closed and I was never notified.

Filed Incident Electrical system · Vehicle speed control · EngineNHTSA 11622211
2010 Porsche 911 TurboEngine & cooling

Last year my 2010 Porsche 911 GT3RS experienced a catastrophic engine failure while on the road. I had to shut off the car in the middle of a 4-lane highway and try to coast to a stop while navigating around much faster traffic risking my safety and the safety of other drivers. There was no warning prior to the failure. Just a sudden bang, followed by shaking and rattling noise. Once the car was towed to an automotive repair shop, the engine was taken apart and it was concluded that a piece from the intake...

Read the full complaint

broke off and got swallowed by the engine while on the road. I have images and documentation of the damage and the parts are available for inspection. The trouble is that the failed piece of the intake was part of a manufacturer recall to fix that exact issue back in 2013. After the findings of the repair shop I contacted Porsche Cars North America. The car was subsequently brought in to a Porsche dealer for inspection, where I was told multiple times that a failed recalled part would be covered by the manufacturer's good will repair policy. After 4 months of back and forth with the headquarters I was told that Porsche would not be responsible. I have spoken to other owners of this exact model cars and several of them have confirmed that their replacement intakes have failed, in some cases causing the engine to completely seize while on the road. Thankfully that did not happen to me.

Filed Incident EngineNHTSA 11501532
2008 Porsche 911 TurboBody, doors & structureEngine & cooling

Catastrophic coolant loss due to failure of a known issue by manufacturer. The coolant loss resulted due to failure of the epoxy that held the hose to the manifold. The epoxy failure affected 3 of the hoses. This was part of a DOT bulletin affecting this model year. Failure on my vehicle came later after warranty had expired due to low mileage. Also in 2021 the rear lid spoiler failed (another known high failure issue known to manufacturer) due to hydraulic fluid loss. Both repairs came at a extremely high...

Read the full complaint

cost and manufacturer refused consideration for help unless vehicle was repaired at their own dealer. This after I had made contact and advised them of location of vehicle at a service facility that is recognized by manufacturer as a credible alternative to their dealer.

Filed Incident Structure · EngineNHTSA 11453241
2015 Porsche 911 TurboElectrical systemEngine & coolingFire

In may 2019 I purchased a certified pre-owned 2015 porsche carrera gts and had it for 11 months before it caught on fire while driving it. A forensic investigation revealed that the cause of the fire was the electrical board located on the inside of the cabin near the right rear tire. On the day of the incident, after driving the car less than 15 miles from my home to a nearby property I noticed the car was smoking as I pulled into the driveway. I parked the vehicle and found that there was a small fire in the...

Read the full complaint

engine compartment. I couldn't get to the car in time with a fire extinguisher and by the time the fire department arrived, the car was engulfed in flames. I'm now faced with a total loss for the vehicle and not to mention reluctance to ever purchase another porsche in my life. I've dreamt about owning this porsche carrera (gts) since I was a child and this experience has totally altered my perception. If my family had been in the car with me, this could have turned out disastrous and for that my confidence has been shattered with porsche. I am also left searching for a car that is close to as nice as the car I had (fully spec'd and decked out carrera gts) which I've had no luck doing within the price point I can afford given the insurance pay out.

Filed Incident Electrical system · EngineNHTSA 11322421
2015 Porsche 911 TurboEngine & cooling

Tl* the contact owns a 2015 porsche 911 carrera. Several times, while driving, the check oil level warning indicator illuminated. When the contact filled the vehicle with fuel, he also had to add oil to the engine. The contact stated that he had to add oil approximately every 500-900 miles. The vehicle was taken to the collection (200 bird rd, coral gables, fl 33146 (305) 444-5555) where a failure could not be diagnosed. The contact was advised that this was a normal issue for this vehicle. The manufacturer was...

Read the full complaint

made aware of the failure, but no assistance was offered. The failure mileage was approximately 10,000. *Ln consumer dated this is a malfunction as well as a safety issue the excessive oil consumption each 500-700 miles 400 have to add oil stop the car or the engine can freeze up on you. Updated 7/24/18*jb *tr

Filed Incident EngineNHTSA 11031568
2008 Porsche 911 TurboEngine & cooling

Lost all the fluid while driving engine hose fell out of fitting common problem on these cars from what I read. Scared the hell out of me lost control of car thank god I didn't not smash.

Filed Incident EngineNHTSA 10984795
2013 Porsche 911 TurboEngine & cooling

At highway speed experienced brief, complete engine failure, then significantly reduced engine power for the remainder of the drive. This type of engine failure in a manual transmission resulted in rapid deceleration. Given this engine braking is a result of engine failure, the rapid loss of speed happens without brake lights alerting other drivers to speed reduction. Testing indicated a failure of the high pressure fuel pump according to porsche technicians.

Filed Incident EngineNHTSA 10808725
2012 Porsche 911 TurboEngine & coolingFire

The automobile lost power on the new jersey turnpike. After gliding to a halt, fire was noted in the engine compartment which subsequently engulfed and destroyed the whole car.

Filed Incident Unknown or other · EngineNHTSA 10781046
2008 Porsche 911 TurboEngine & cooling

Common coolant leak, catastrophic failure, had to pull over and have vehicle towed, vehicles was pouring coolant out.

Filed Incident EngineNHTSA 10722098
2001 Porsche 911 TurboEngine & cooling

Coolant pipes come apart while driving and there was rapid loss of engine coolant. The problem exists on the gt1 motor because there are a couple coolant pipes in these motors that are not a single cast piece: the larger cast pieces have extruded inlet/outlet tubes that are connected using an adhesive. There is no metal-to-metal friction or press-fit to keep these tubes in place, so after enough heat cycles the adhesive will soften/loosen up and the tube will come out of the cast block (with the hose still attached), resulting in a rapid loss of engine coolant. ....Updated 04/25/16 *bf

Filed Incident EngineNHTSA 10716256
2005 Porsche 911 TurboEngine & cooling

I was driving my car on city streets when a warning message appeared on my dashboard indicating that I should check my engine coolant level. I drove on for a short time (a few minutes) and then parked briefly, shutting off the engine (again for a few minutes) to consider the situation and to call the service department of my dealership (which was closed since it was late in the day). As I was close to home, I decided to drive the car there. About five minutes later, the warning message changed to an indication...

Read the full complaint

that the engine temperature was too high. I immediately pulled over and arranged to tow the car to the dealership. There the problem was diagnosed as a failure of a coolant pipe that led to coolant loss, which requires an estimated $7,500 in repair work. I have since learned that this is a recognized problem with the model, make, and year of my car. An nhtsa report has been filed about this, with an action number of pe13009 (opened on april 26, 2013). While I was not driving at high speed and there was no crash, fire, injury, or fatality associated with this event, this issue poses significant safety risks given how quickly the vehicle's engine temperature exceeded safe operating limits. Under higher velocity conditions the situation could have posed significant risks to my and others' safety. I have brought this to your attention given that it is a recognized and ongoing issue with this make, model, and year car and that it appears to be caused by a fundamental design flaw. *Tr

Filed Incident Engine and engine coolingNHTSA 10632889
2005 Porsche 911 TurboBrakesEngine & coolingFuel system

Epoxy holding pipe in water pump housing failed causing pipe to separate, coolant to dump on rear wheels and brakes, and loss of traction/degraded rear braking. *Tr

Filed Incident Service brakes, hydraulic · Engine and engine cooling · Fuel system, gasolineNHTSA 10557964
2005 Porsche 911 TurboEngine & cooling

Due to highlighted problems with the cooling system (namely the fittings popping off) on the 2005 porsche 911 gt3 in various forums and web sites. I have decided to perform preventative maintenance and to alleviate safety concern with the cooling system (fitting and hoses) to weld the coolant cuplings. *Tr

Filed Incident EngineNHTSA 10532876
2001 Porsche 911 TurboEngine & cooling

While driving on the highway a catastrophic failure occurred in the coolant system. One of the aluminum hose fittings that is epoxied into the aluminum housing broke free causing engine coolant to empty out of the engine onto the highway in a matter of seconds. The rubber hose did not fail and it was still connected to aluminum hose fitting that broke away from the housing. I pulled the car off the freeway immediately to prevent further damage to the car. Further inspection at the dealer service center showed there was very little to no coolant left in the entire system. *Tr

Filed Incident EngineNHTSA 10525577

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience