My 2002 suzuki bandit 1200s has such poor lighting for the low beam, in daytime you cannot hardly tell it is on, and at night provides no light. Very dangerous. I put a silver star bulb which purportedly provider 30% more light than stock and no change. *Tr
Lights
Suzuki GSF1200S Lighting problems by year
4 complaints filed with NHTSA about the Suzuki GSF1200S's lights. Headlights, tail lights, brake lights, turn signals and interior lighting failures.
Lighting complaints by model year
Latest GSF1200S lighting complaints
The sealed projection-beam headlight assembly on my 2001 suzuki bandit gsf1200s motorcycle has an internal coating of fine black powder on the high beam lens that has reduced the high beam output to practically nil. This defect apparently results from poor quality control during the manufacturing process, and has progressed over time to the point where riding the motorcycle is dangerous at night, and has reduced its visibility in daylight. According to the suzuki bandit owners website "maximum-suzuki.Com.", This defect is very common in this model, and suzuki is reluctant to adress the problem. No parts have been repaired or replaced as of yet.
Defective headlight assemblies that become useless at night. The headlight assembly is a sealed unit. After 5000 miles, my headlight was full of a black powdery substance which coated the inside surface of the lens thereby rendering the lighting poor at best. *Ak there were also numerous small pieces of glass from the edges of the projector beam lens rattling around inside the assembly. The motorcycle could not be ridden at night due to the lack of adequate lighting. I had reported this defect to the suzuki...
Read the full complaint
safety defect hotline and subsequently the manufacturer has replaced my old assembly (furnished the part only, no labor). The new assembly appears to be of the same construction and carries the same part number. I fully expect that this assembly will likely perform no better than the one it replaced. There are numerous others that I know that have the same motorcycle with the same problem.*Ak
When applying brakes brake light is poorly visible, and it is insufficient enough to see. Dealership was aware of problem.*Ak consumer was informed by dot that the lights must be visible at 500 feet, dealer suggested adding more lights at consumers expense, one person used aluminum foil to increase brightness. *Slc
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data