Volvo Acl Problems by year

On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to...

Vehicle description: heavy duty 6x4 trucks equipped with chalmers 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.

Vehicle description: heavy duty, class 8, trucks equipped with tie rod assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can...

Vehicle description: heavy duty trucks equipped with accuride 22.5 X 8.25 15 Tubeless demountable rims, part no. 32051. Certain rims contain a non-fusion area in the butt-weld of the mounting ring. Under certain circumstances, the defect could develop...

Vehicle description: heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets. The tie rod ball-socket bearings have a below specification case depth and/or hardness which can...

Vehicle description: heavy duty trucks equipped with trw 20-edl ball-socket assemblies. Certain of the ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket. These bearings were...

Vehicle description: heavy duty trucks built with bendix air abs with an ec-17 1030r electronic control unit (ecu), there have been reports of unwanted abs activation at low speeds caused by 1) chafed abs wheel speed sensor wires on rotating parts or 2) a...

Vehicle description: heavy duty trucks equipped with haldex manifold dash valves (mdv) used in tractor and trailer parking brakes. These valves do not meet the requirements of fmvss no. 121, "Air brake systems." A loss of the isolation of the two brake...

Vehicle description: heavy duty class 8 trucks equipped with fontaine fifth wheel assemblies, models sl5wms6125, sl5wms7125, sl5wms8125, sl5wms9125, sl5wms10125, sl5apm6125, sl5apm7125, slapm8125, sl5apm9125, sl5apm10125, sl5wms-d, sl5apm-d, and sl5bps-d...

Vehicle description: heavy duty trucks equipped with a steel fuel tank. The closure only fuel tank cap, installed on the steel fuel tank, failed when the tank was dropped from a 10' height as required by fmvss no. 393, "Liquid fuel tanks."

Vehicle description: heavy duty trucks equipped with a fal 8.0 Front steer axle. The upper steering arm can fail without warning.

Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that...