Winnebago Industries, Inc. (Winnebago) is recalling certain model year 2015-2016 Winnebago Sightseer and Itasca Sunova motorhomes with a D35G floorplan, manufactured March 19, 2015, to July 15, 2015. In the affected vehicles, the wiring harness behind the...
Electrical system
Winnebago Sightseer Electrical problems by year
6 complaints filed with NHTSA about the Winnebago Sightseer's electrical system. Dead batteries, warning lights, wiring, alternators, infotainment and electronic module failures.
Electrical complaints by model year
Electrical recalls
On certain motor homes, if the battery boost switch is engaged while the engine is operating, the engine may shut down.
Latest Sightseer electrical complaints
Recall made december 2005 to repair/replace actia instrument cluster (bulletin #8051-ia, replaces 80201-i, dated march 2002). Have had motor home at repair shop since october, 2012 & have not been able to get "workhorse (navistar) customer service to correct the fault. Keep getting promise, weekly, with no result. Have written winnebago & workhorse (navistar) on other problems and get no help from either. This motor home cost $86,000 new and they refuse to correct a fault that might cost them less than $1,000...
Read the full complaint
(my guess). Need someone to put their feet to the fire and get this completed (at no cost to me) bfore trying to read lcd readouts causes a catastrophic event. [[redacted]] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
In trying to start the motor home, I noted the ignition key would not turn. After repeated attempts to turn the key, it started. While driving I noticed a pungent odor, indicative of burning electrical components. After shutting down, I noticed smoke coming from below the steering column. Upon further investigation I found burnt wiring and connectors below the steering column. The ignition switch apparently overheated, distorted and continued burning in place. It is my understanding that workhorse, the chassis...
Read the full complaint
manufacturer, sells an aftermarket kit to mitigate this dangerous situation. It is obvious that this switch is overloaded and the load should be decreased on it, or the switch should be designed with the increased load compensation included. Winnebago/workhorse should be supplying a "fix" for this problem and informing the motoring public of the danger inherent in the flawed design of this ignition system. *Tr
Preparing to go camping, I started my winnebago sightseer and positioned it to attach my towed vehicle. I shut off the engine at that point. After completing the hitching procedure, I attempted to start my rv. It would not start. After having the vehicle towed to a local truck dealership, they found "that the ignition switch and one connector was burnt." They called winnebago and "found that there was an update relay harness for this problem" which they ordered an installed. Although this obviously was a...
Read the full complaint
recurring problem (otherwise why an updated kit), the service rep I then contacted at winnebago, claimed to have no knowledge of this defective switch and stated there was no recall or advisory bulletin concerning this problem. I did some rudimentary searching on the internet and found at least 2 different complaints re this same problem, one of which was on a 2005 sightseer. I in those incidents it seems that the switch shorted out while the rigs were underway, resulting in a sudden loss of engine power, power steering and power brakes. I consider myself fortunate that did not happen to me. However the towing, labor and parts charge came to over $1000, much of the labor cost due to the time involved in diagnosing the problem. The winnebago service rep made the observation that they should have called winnebago sooner, the implication being that winnebago knows about the problem. This again brings up the question why no recall or advisory bulletin to owners? I have the damaged switch and connector in my possession and have photographed them as well. *Tr
Was passing truck on hill when 18 wheeler passed on right side and if I had not slamed on breaks 3 of us would be scattered on I 40. What caused this happening was the lost of power (down to 45mph) midway thru my passing of first truck. The vehicle is a 07 winnebago view. Vin#[[redacted]]. This is a recurring problem among view and navions. Yahoo groups view-navion can give you over 4000 entrys on this problem. My wife thought she was going to die when that silver truck going as fast as hell went by us on the...
Read the full complaint
right side. Please, before some one gets killed get winnebago to fix this problem. *Nm updated 07/12/2012 *js information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6)
Bought 2003 winnebago/ sightseer model 30b leftover from meyers super store in new york on february 14, 2004. Since then have had numerous defects on unit. Hydraulic jacks failed on first trip- leak on jack at fitting, jack would not retract. Taken for service, could not find problem. Service dealer replaced numerous parts in five trips to dealership (manifold replaced; solenoid replaced; switched wires; replaced switch box inside unit - touchpad). Left rear jack still does not seem to work in unison with...
Read the full complaint
other jacks when used. Second trip out - water heater failed to ignite on 2nd day. Resistor replaced under warranty. Other problems encountered so far: pod left of entry door leaks, stain on carpet by table when slide is out - shampooed out twice - returns; entry door hard to close - must be slammed to close tight; border in bathroom and kitchen areas falling off; stain on curtain - passenger side - front shade; 30 amp plug separating from cord on landline for camper - replaced warranty. Entry door rattles when unit is moving. On 9-27-04, on 2nd trip back to service dealer for repair of generator (not working) engine compartment caught fire when jacks were being put down due to hydraulic fluid hitting exhaust manifold from broken hydraulic line where it exits raceway for hoses behind engine. On 10-8-04 , heard from service dealer (spitler rv, montoursville, pa) that winnebago acknowledges sharp edge of rail caused hose to be cut and authorized spitlers to do necessary repairs. Do not feel that repairs are warranted at this time due to problems and fire on unit. Unit should be replaced or bought back at original sales price & trade in should be refunded in cash. *Nm
While driving vehicle stalled due to a malfunction in the ignition switch wiring. Vehicle was taken to the dealer, who found determined that ignition switch wires melted. Ignition switch was replaced three times. *Ak auto park system failed multiple times. Also, spark plug wires burned up. It was assumed that there was a fault in the fuel pump, but vehicle still malfunctioned after the replacement of the fuel pump. When air conditioner is on, engine temperature rose around 210 degrees fahrenheit, dealer...
Read the full complaint
checked vehicle and found that thermostat needs to be replaced. Installed new thermostat. Vehicle was running rough when being driven uphill. Upon inspection, it was found that spark plugs where worn out. Dealer replaced spark plugs and ignition wires. *La
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data