Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Suspension

Buick Envision Suspension problems by year

13 complaints filed with NHTSA about the Buick Envision's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.

Suspension complaints by model year

YearSuspension complaintsCrashesInjuriesRecalls
20241000
20211000
20193000
20183000
20172000
20163000

Latest Envision suspension complaints

2019 Buick EnvisionSuspension

I bought this vehicle used to take on a trip with my family. Drove it for a week and seemed to be fine. Got on the other side of Chicago, on interstate 80 (70mph) and the engine started shaking like an earthquake. Had to slow down fast and cross traffic to pull over. As soon as I pulled of the road it stopped, so I restarted. This happened 6 times on way to my destination, with one time in pretty heavy traffic and almost got hit by an 18-wheeler. I took it to a good service center when I got to my...

Read the full complaint

destination and he read the Service bulletin 22-NA-211 on this issue and fixed it. Had a safe trip home. From what I understand, the hydraulic mounts leaked and they had to replace bushings. It seems to be a common problem for the 2019 model.

Filed Incident Suspension · Unknown or otherNHTSA 11721060
2024 Buick EnvisionSteeringSuspensionWheels & tires

"Loss of vehicle stability" "Feels like wheels may detach" "Ride height abnormal" "Unresolved after multiple repairs" "Safety risk"

Filed Incident Steering · Suspension · WheelsNHTSA 11714882
2019 Buick EnvisionSuspensionWheels & tires

The problem started in the past year (2024-2025) with severe shuddering while driving over 35-40 mph and going over a patched pothole or other irregularity in the road. The shuddering would continue until I slowed to stop. It is quite alarming & feels like the car is falling apart and is more difficult to manuever when this occurs. Once I slow to a stop, the shuddering stops and I am able to proceed once again. I mentioned it earlier in the year (2025) when I went for an oil change but dealer was not aware of what it could be. I look for potential road irregularities but sometimes they are unavoidable as it has occurred again recently.

Filed Incident Suspension · Wheels · Unknown or otherNHTSA 11695619
2018 Buick EnvisionSuspension

UNKNOWN- when driving onto a rough road my front end will shake violently, even the steering wheel shakes. Sometimes it will go on for about 1 minute + or -

Filed Incident SuspensionNHTSA 11694386
2019 Buick EnvisionSuspensionWheels & tires

Severe shuddering while driving. Sometimes on a smooth roadway and sometimes when crossing over a patched pothole. Shuddering continued until slowed to stop. When starting to go again car did not shudder until next incident.

Filed Incident Suspension · Wheels · Unknown or otherNHTSA 11646844
2021 Buick EnvisionSuspensionFuel system

The contact owns a 2021 Buick Envision. The contact stated that while operating the vehicle, the contact heard a popping sound coming from the front end of the vehicle, and the vehicle became difficult to steer. The vehicle was taken to the local dealer who determined that the front driver's and passenger's side ball joints, and control arms were faulty and needed to be replaced. The vehicle was repaired but the failure reoccurred, and the control arms were replaced a second time. Also, while driving the odor of...

Read the full complaint

fuel was present inside the cabin of the vehicle and the vehicle hesitated and jerked while depressing the accelerator pedal. The vehicle was taken to the local dealer who diagnosed that the fuel injector and fuel sensor were faulty. The fuel injector and fuel sensor were replaced but the failure persisted. The cause of the failure was not yet determined. The manufacturer was not contacted. The failure mileage was approximately 24,000.

Filed Incident Suspension · Fuel system, gasolineNHTSA 11615453
2016 Buick EnvisionSuspension

GM is out of control . I have a front passenger control arm assembly in the shop for 2 months. No update on service part because they have changed the part number as the 2016 is unsafe. I need my service part or a new car . It's unsafe to drive and GM will not provide any update on ETW because there is a safety issue with this part. They already killed over 100 people from the ignition switch problem. Cruise dragged a person under a self driving taxi. Hold them accountable for once. They are an un responsible company. Help me as I have no car and my car is unsafe to drive.

Filed Incident SuspensionNHTSA 11568215
2016 Buick EnvisionSuspension

Unsafe driving condition. Control arm assembly front passenger. Car in the dealer for a month. GM has no service parts and refuses to give update on availability. Dealer states unsafe to drive and I have seen multiple complaints for this issue.

Filed Incident SuspensionNHTSA 11564703
2018 Buick EnvisionSteeringSuspensionEngine & cooling

My Buick Envision started to occasionally create notable vibration in the front and traveling into the steering column. I brought the car to a GMC Buick dealership in Amite, LA(4/13/21) it was there for 3 days. The problem couldn't be duplicated. Next the car was brought to Royal Buick, Baton Rouge, LA(10/26-11/6/21.Having trouble controlling the car on each occurs.

Filed Incident Steering · Suspension · EngineNHTSA 11441122
2018 Buick EnvisionSuspension

Tl* the contact owns a 2018 buick envision. The contact stated that the vehicle vibrated when driving at 36 to 40 mph and caused the steering wheel to vibrate. The contact stated that when the speed was increased to 41 mph, the vibration stopped. The vehicle was taken to paul masse buick gmc south (2909 tower hill road, saunderstown, ri 02874, phone (401) 515-3737). The dealer was able to duplicate the failure. The manufacturer was contacted and advised the contact that there was not a fix for the vibrating failure. The vehicle was not repaired. The manufacturer was contacted. The failure mileage was 400.

Filed Incident SuspensionNHTSA 11300844
2017 Buick EnvisionSuspension

1 Month old it developed a vibration/shimmy in the steering and felt on the floor of the care that could be felt by driver and passenger. Shimmy started when accelerating and turning and progressed to also when acceleration when driving straight ahead. It is now 9 months old and I can feel while driving on the highway at higher speeds. Dealer contacted buick for advice since they were unsure what was causing the vibration, told to replace front axil but was no better. Continued to request repair but dealership and...

Read the full complaint

buick, stated cause of problem unkown and no fix is in development. Told it was a "characteristic of the vehicle": the vibration-shimmy is getting worse and I am fearful of a catastrophic failure of whatever part/parts are faulty. Faulty parts or design could cause a serious accident when traveling at high speed or when the car is in motion at any speed. Additional documentation available but unable to upload will supply if needed.

Filed Incident SuspensionNHTSA 11130260
2016 Buick EnvisionSuspension

Gm uses a separate control arm bushing connector for various models such as buick envision. This connector is a defective design! The control arm bushing connector must use a rigid one-piece structure that is subjected to very large forces and therefore must be of a rigid, high strength and tough structure.The gm's split-type control arm bushing connector consists of two bolts inserted into a hollow bushing, and the connector and the outer bushing are vulcanized to form the control arm bushing assembly.The control...

Read the full complaint

arm arm connector has a circular block thrust design on the left and right ends.The sleeve of the control arm bush press-fit into the control arm constitutes a control arm assembly structure.This design was born around 2013, and it was used by gm in 2014 for a variety of production models.The problem with this structure is that when a large load impact is applied to the wheel, the control arm bushing will receive longitudinal and lateral forces, and the inner sleeve of the connector part may be squeezed under the bolts at both ends. Plastic deformation causes the connector to fail.According to professional data, the ultimate strength of the control arm assembly should reach about 80000n, and the strength of the control arm bushing connector is higher. However, the strength of the separate control arm bushing connector is less than 40,000n will fail.The structure adopted on buick envision, where hundreds of control arm bushings fail in china, was also exported to the united states.According to statistics, there are several models in the united states that have adopted this unsafe design one after another! Including lacrosse, chevrolet malibu, etc.These models are new after 2015.According to the case study, the strength of the gm control arm is lower than the normal range, which has a great impact on safe driving and endangers driving safety! *Tt *tr

Filed Incident SuspensionNHTSA 11100908

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience