- The problem
- On certain passenger vehicles involved in this campaign, the lower control arm ball stud nut/washer assemblies with washers were made of the wrong material. The washers may fracture and become loose or fall away from the vehicle, reducing clamp load. Separation of the control arm ball stud and steering knuckle, due to disengagement of the tapered attachment and retaining nut, is possible.
- The risk
- If the control arm separates from the knuckle, the affected corner of the vehicle will drop and the control arm would be forced downward, contacting the wheel. The affected wheel could tilt outward and create a dragging action that would tend to slow the vehicle and create a tendency for the vehicle to turn in the direction of the affected wheel. In extreme situations, the affected wheel assembly could separate from the vehicle. Separation of the wheel assembly would also sever that wheel;s hydraulic brake hose and result in diminished braking performance of the vehicle, which could result in a crash.
- The fix
- Dealers will inspect the ball stud joints and measure the torque of the nut for all front lower control arms in all models affected as well as the rear lower control arms on the xlr and corvette. If the torque is not at specification, the dealers will replace the ball stud, the knuckle, and the nut. If the torque is at specification, the dealers will replace the nut/washer assembly only. The recall will begin on august 25, 2004. Owners should contact cadillac at 1-866-982-2339 or chevrolet at 1-800-630-2438.
Steering
2004 Cadillac XLR Steering problems
Owners have filed 1 complaint about the 2004 Cadillac XLR's steering with NHTSA - 3% of all its complaints, most recently on March 24, 2014. They describe 1 crash, 0 fires and 0 injuries. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
- Complaints
- 1
- Recalls
- 1
- Crashes
- 1
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Steering recalls for the 2004 Cadillac XLR
Steering complaints
Tl* the contact owns a 2004 cadillac xlr. The contact stated that the steering wheel would emit an abnormal noise when turned in either direction. Also, the contact was traveling approximately 40 mph when the stability control warning light illuminated. The contact applied the brakes for a traffic stop and the brakes seized, causing the contact to crash into the passenger's side of another vehicle. The abs traction control warning light also illuminated after the failure occurred. There were no injuries and a...
Read the full complaint
police report was filed of the incident. The contact also stated that the vehicle was included in nhtsa campaign id number: 05v046000 (vehicle speed control). The vehicle was taken to an authorized dealer on multiple occasions however, the dealer was not able to duplicate or repair the failure. The manufacturer was notified of the failure. The vin was not available. The approximate failure mileage was 110,000. Updated 05/28/14 ma the consumer stated the axel was replaced and repaired. Updated 05/30/2014 *js
Cadillac XLR steering complaints by year
XLR steering problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data