Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2019 Can-AM Ryker Problems, complaints & recalls

Owners have filed 39 complaints about the 2019 Can-AM Ryker with NHTSA, most often about the steering (17) and the wheels & tires (14). Those complaints describe 1 crash and 1 injury. It is covered by 3 recalls, the latest in December 2023 for the fuel pump. For comparison, the 2020 has 16.

NHTSA data checked

DMore problems than a typical Ryker year, for its age

#119 most complained-about 2019 vehicle

Complaints
39
Recalls
3
Crashes
1
Fires
0
Injuries
1
Deaths
0

Most common 2019 Can-AM Ryker problems

Share of all 39 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

2019 Can-AM Ryker recalls 3

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Fuel system: fuel pump

23V85500010,969 vehicles affected

The problem
Bombardier Recreational Products, Inc. (Bombardier) is recalling certain 2019-2023 Can-Am Ryker motorcycles. The impeller may swell, causing the high-pressure fuel pump to fail.
The risk
A fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
The fix
Dealers will inspect and replace the fuel pump as necessary, free of charge. Owner notification letters were mailed February 27, 2024. Owners may contact Bombardier customer service at 1-888-272-9222. Bombardier's number for this recall is Bulletin 2023-10.

Electrical system: wiring

22V79900046,119 vehicles affected

The problem
Bombardier Recreational Products (BRP) is recalling certain 2019-2023 Ryker motorcycles. The position light and flasher electrical harnesses in the front fenders may loosen and rub on the tire, leading to a short circuit and resulting in an engine stall while driving.
The risk
An engine stall while driving increases the risk of a crash.
The fix
Dealers will secure the two harnesses, free of charge. Owner notification letters were mailed December 9, 2022. Owners may contact Bombardier customer service at 1-888-272-9222.

Wheels: lugs / nuts / bolts / studs

19V68300011,378 vehicles affected

The problem
Bombardier Recreational Products Inc. (BRP) is recalling certain 2019-2020 Can-Am Ryker motorcycles. The wheel nuts may crack, causing the wheels to loosen.
The risk
Loose wheels may cause a loss of vehicle control, increasing the risk of a crash.
The fix
BRP will notify owners, and dealers will replace the wheel nuts, free of charge. The recall began October 17, 2019. Owners may contact BRP customer service at 1-888-272-9222.

What owners say

Be the first Ryker owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

39 complaints about the 2019 Can-AM Ryker

Newest first, as filed with NHTSA by owners. Page 1 of 2.

Steering

If you hit a bump the steering will go out of alignment left or right and the direction is different Tight the column if the steering many times tight the was its engineered is too weak

Filed Incident SteeringNHTSA 11622617
Electrical system

The contact owns a 2019 Can Am Ryker. The contact stated that while making sharp left turns at moderate speeds, the vehicle independently slow downed without warning. The contact stated that the handlebars and the rear tire would vibrate during the failure. Upon investigation, the contact linked the cause of the failure to a defective turn sensor. The contact had taken the vehicle to two dealers for inspection. The manufacturer was notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 2,200.

Filed Incident Electrical systemNHTSA 11551342
Steering

At approximately 5600 miles, my Can-Am Ryker went into limp mode during a ride, limiting my top speed to 50 mph on the highway. This unexpected and sudden occurrence put my safety and the safety of other road users at risk. Request for NHTSA Intervention: I am reaching out to NHTSA to request your immediate intervention in addressing this widespread safety concern with the Can-Am 3-wheel motorcycles manufactured by Can-Am BRP. It is crucial that this matter is investigated thoroughly, and necessary actions are...

Read the full complaint

taken to ensure the safety of riders and passengers who are at risk due to the malfunctioning Stability Control System and associated components. I kindly request that NHTSA: Conduct a comprehensive investigation into the safety issue described, including the YAW sensor, SAS system, and Stability Control System of Can-Am. Collaborate with Can-Am BRP to expedite the development and implementation of a reliable and effective solution to rectify the issue, ensuring the safety of riders. Consider issuing a safety recall or other appropriate actions to address the issue in all affected vehicles. The safety of riders and road users is of paramount importance, and I believe that NHTSA's intervention is crucial in ensuring that this issue is resolved promptly. Issue Description: The Stability Control System on my Can-Am 3-wheeler engages during low-speed left turns when it is not required, which leads to significant safety issues. This system does not engage in a similar manner during right turns of comparable speed and sharpness. When the Stability Control System engages on a left turn, power is unexpectedly cut to the rear wheel, and the right brake engages, resulting in a disconcerting "wobble," unsteadiness, and a sensation of jumping. This situation causes extreme unease and creates a sense of losing control over the vehicle.

Filed Incident SteeringNHTSA 11548894
Electrical systemAcceleration & cruise controlBrakes

The Stability Control System engages on low speed left turns when it is not required. It does not engage on right turns at similar speed and sharpness of corner. Power is cut to the rear wheel and the right brake engages, causing a "wobble", unsteady, and jumping sensation. This creates unease and the sense of losing control. I've been told this is a common problem that the YAW sensor and sas system is faulting. please get this fixed as it is dangerous.

Filed Incident Electrical system · Vehicle speed control · Service brakesNHTSA 11546444
SteeringWheels & tires

Can Am Ryker Wobbly Front and Back Tire/VSS Fault death wobbly VSS63 Code

Filed Incident Steering · WheelsNHTSA 11538615
Steering

My Ryker has developed the Yaw SAS fault codes C006C & C0063C being excessive play in steering components. It is a very wide known problem causing the trike to go into limp mode with no consumer fix without a dealer getting involved. This comes down to a poor designed bushing on the SAS sensor that fails due to turning stress on it. I am aware of the TSB 137209 which is also on my list of repairs. I have about 5600 miles on it when the trike went into limp mode leaving me with a top speed of 50 mph on the highway....

Read the full complaint

This forced me to finish my 45 minute trip home at a very unsafe speed on the highway as I had no way to have it towed home> I will now have to find a way to a dealer thats over an hour away just to get a quote on the repairs as they are the only affordable way to clear the codes after repairs are done

Filed Incident SteeringNHTSA 11538248
SteeringTransmission & drivetrainBrakes

The vehicle Stability Control System engages on low speed left turns when it is not required. It does not engage on right turns at similar speed and sharpness of corner. Power is cut to the rear wheel and the right brake engages, causing a "wobble", unsteady, and disconcerting sensation. This creates unease and the sense of losing control. Can Am has a service bulletin that may be related to this problem: https://static.nhtsa.gov/odi/tsbs/2020/MC-10181946-0001.pdf They will apply this fix if under warranty, but my warranty has expired. Many people have experienced this or similar problems.

Filed Incident Steering · Power train · Service brakesNHTSA 11528711
SteeringWheels & tires

I reached out to dealer ship and manufacture of my unit, explain to them that my unit has a serious wobble and shuddering skip while making turns in curves. I feel like it about to throw from the unit when it does this. I was told it was a yaw sensors. They would then tell me my bike is fine but it an ongoing issue that they refuse to look into

Filed Incident Steering · WheelsNHTSA 11523137
SteeringBrakes

When making left hand turns the rear brake and front right surges on its own making it hard to control the vehicle. BRP knows the issue and has a TSB on it but the fix is a bandaid. The problem is the bearing failures that keep occurring in the pitman arm due to poor design, but BRP is saying this isn't happening, even though it is a major complaint on the BRP Ryker forms. BRP TSB number # 137209

Filed Incident Steering · Service brakesNHTSA 11520841
Engine & cooling

the coolant reservoir has started to split at the seam so it leaks coolant.

Filed Incident EngineNHTSA 11515240
SuspensionElectrical systemDriver assistance

When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I've looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I've researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it's not an issue being reported enough. I can't afford to have this...

Read the full complaint

issue that came from factory fixed because they don't want to fix their issue. This is a major concern, at highway speed on an overpass I experience this issue daily and I'm afraid it's going to cause an accident, because when it occurs the bike automatically slows 10-15 mph without me hitting the brakes, and I am worried I'm going to get hit by someone because of a defect in their product.

Filed Incident Suspension · Electrical system · Forward collision avoidanceNHTSA 11510105
SteeringElectrical systemDriver assistance

When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I've looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I've researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it's not an issue being reported enough. I can't afford to have this...

Read the full complaint

issue that came from factory fixed because they don't want to fix their issue. This is a major concern, at highway speed on an overpass I experience this issue daily and I'm afraid it's going to cause an accident, because when it occurs the bike automatically slows 10-15 mph without me hitting the brakes, and I am worried I'm going to get hit by someone because of a defect in their product.

Filed Incident Steering · Electrical system · Forward collision avoidanceNHTSA 11510104
Acceleration & cruise controlBrakes

While driving at speeds around or above 20 mph when turning left the ABS or braking system begins activating causing a very serious hazard. This does not happen at any speeds when turning right. This has been reported by numerous Ryker owners. I have brought it into the shop and they are not able to locate or resolve the issue. This is an extremely dangerous situation as the biker will lose control at high speeds and potential force the driver off road or into another lane. This happens all the time and is constantly happening.

Filed Incident Vehicle speed control · Unknown or other · Service brakesNHTSA 11491269
Brakes

On 06/28, while operating my vehicle at around 20 miles an hour I received a "Brake Failure" warning (indicated by a message on the vehicle display) and my brakes began to fail to fully engage. I was able to stop the vehicle after pressing the brake multiple times. I shut down the vehicle and the brakes returned to normal operation, however after riding just a few miles the issue began again. The issue persists and the requirement to "pump the brake peddle to achieve a stop remain consistent. I have taken the...

Read the full complaint

vehicle to a shop to have the vehicle inspected and repaired. The vehicle has 10,800 miles on it and recently had the recommended 12k mile maintenance performed on it (May of 2022) by a certified technician, at a certified dealer (Ridenow Powersports in Goodyear Arizona). No issues were reported at the time during that inspection. The vehicle has not been used in a highly spirited way and the brakes applied in normal, dry, conditions. No constant brake compression while riding or any other abnormal operation conditions. I contacted Can Am and they provided no insight, suggestion or direction other that "see an authorized dealer".

Filed Incident Service brakesNHTSA 11471793
Steering

When making a left hand turn or a right turn at 40-45 mph it starts shaking ,I have to slow down then it stops shaking ,this could be an accident waiting to happen,,,the vehicle is a 2019 can am Ryker 600 ace

Filed Incident SteeringNHTSA 11468234
Steering

My Ryker started giving me problems going into sharp curves to the left. I have taken it to the dealership back in November and they couldn't find anything wrong with it. The problem continues. The same curves I used to take at 55-60, now I can't take over 40-45 without the front end feeling like it is going to slid me off the road! The bike I used to love riding and always wanted to take curvy roads with scares me now. It's not safe! I am either going to take the curves at speed limit and chance getting slug off...

Read the full complaint

into a ditch or I am going to slow down 10-15 mph and have someone run into the back of me. I posted my problem on a Ryker Facebook page and had over 60 comments. I am by far not the only one with this same problem! If something doesn't get done about it, someone is going to get seriously hurt or killed! Please make this a recall! We want to enjoy our bikes like we used to and feel safe doing it!

Filed Incident SteeringNHTSA 11467897
Other & unknown

The contact owns a 2019 CAN-AM Ryker. The contact stated while driving 12 MPH and making a turn, the vehicle started jerking and began to lose motive power. There was no warning light illuminated. The contact stated upon making half the turn and slightly depressing the accelerator pedal, the vehicle independently accelerated. The contact depressed the brake pedal and continued to drive. The vehicle was taken to the dealer where the pitman arm was replaced; however, the failure reoccurred while driving and making a...

Read the full complaint

turn. The vehicle was taken to the dealer where it was diagnosed that the traction control was malfunctioning and would engage while making turns. The dealer reported the failure to the manufacturer. The manufacturer informed the dealer that the vehicle was operating as intended and that there was no failure with the traction control system. The vehicle was not repaired. The failure mileage was approximately 16,000.

Filed Incident Traction control systemNHTSA 11466064
SteeringSuspensionElectrical system

Ryker went into limp mode

Filed Incident Steering · Suspension · Electrical systemNHTSA 11464707
Engine & cooling

Making left turns causes vehicle to go into limp mode which makes vehicle lose control! It's a known issue with rykers that BRP refuses to validate!!! Almost lost control and crashed due to it

Filed Incident EngineNHTSA 11464635
Steering

I have been dealing with an issue since December 2021 where the wheels lock up on tight left turns which has been pretty dangerous. Trike gives off vss code c0063 and c006c. I have taken it to the dealer on 3 occasions each time being told it was fixed only to have to situation reoccur a few days later. I have been unable to ride the vehicle since December.

Filed Incident Steering · Unknown or otherNHTSA 11464610
SteeringElectrical systemBrakes

When going on left turns feel like it jerks or like the abs is kicking in and I'm not sliding. When this happens it pushes me to the outside of the curve. Has done it since day one of owning it. Bought brand new. Hundreds of people on social media are have the same problem and the refuse to fix it.

Filed Incident Steering · Electrical system · Service brakesNHTSA 11461346
Other & unknown

The right wheel and back tire wobbles uncontrollably when making left turns. It's very dangerous. My dealership doesn't know how to fix it.

Filed Incident Unknown or otherNHTSA 11461334
Acceleration & cruise controlBrakes

while making a left turn the right front brake comes on and causes the steering to shake and the rear to seem to fishtail. the bike has been back to the dealer for repairs several times. the last time it was there 10 months. got it back in march and it was good for almost a month and then it started again. the dealer is trying but can-am doesn't seem to be much help. been in the shop for over 15 months total.

Filed Incident Vehicle speed control · Service brakesNHTSA 11461007
Steering

Bearings in Pitmen Arm are failing. The Bearings are not pressed in and wear out quickly causing binding in the steering and triggering a VSS fault Code. Resulting in the vehicle going to Limp mode. I have seen many Can Am Rykers have this problem. Can Am refuses to Correct the problem. By the way my Ryker only has 1100 Miles on it and it's a 2019. Help before someone gets Killed.

Filed Incident SteeringNHTSA 11454204
SteeringWheels & tiresBrakes

When making left turns in curves the right wheel brakes automatically, caused me to run off the road, luckily I didn't get hurt

Filed Incident Steering · Wheels · Service brakesNHTSA 11451516

Can-AM Ryker: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20238300SteeringC
202234440SteeringF
202135200SteeringD
202016410SteeringC
201939310SteeringD
All Ryker years

2019 Can-AM Ryker vs rivals

VehicleComplaintsRecallsCrashesGrade
2019 Can-AM Ryker3931D
2019 Can-AM Spyder RT620CCompare
2019 Can-AM Spyder F3520CCompare

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2019 Can-AM Ryker? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2019 Can-AM Ryker

Does the 2019 Can-AM Ryker have any recalls?

Yes - NHTSA lists 3 recalls for the 2019 Can-AM Ryker: fuel pump (December 2023); wiring (October 2022); lugs / nuts / bolts / studs (September 2019). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

What are the most common problems with the 2019 Can-AM Ryker?

By the complaints owners filed with NHTSA, the most common problem areas are the steering (17), wheels & tires (14), brakes (10).

How many complaints has the 2019 Can-AM Ryker had?

39 complaints have been filed with NHTSA, the first on August 1, 2019 and the latest on October 29, 2024. Of these, 1 describe a crash and 0 a fire, and together they report 1 injury and 0 deaths.

Is the 2019 Can-AM Ryker a reliable vehicle?

Its Safety Index is 37 out of 100 (grade D: more problems than a typical Can-AM Ryker year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Can-AM Ryker years have the most complaints?
What should I do if my 2019 Can-AM Ryker has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience