- The problem
- Chrysler is recalling certain model year 2012 chrysler vehicles, including 200 and town and country models, dodge vehicles, including charger, durango, grand caravan and journey models and jeep grand cherokee vehicles manufactured from august 31, 2011, through september 13, 2011, that are equipped with 3.6L engines. These engines may experience connecting rod bearing failure due to debris inside the engine block.
- The risk
- Connecting rod failure may lead to engine seizure which may increase the risk of a crash.
- The fix
- Chrysler will notify owners and replace the engine free of charge. The safety recall is expected to begin on or about november 18, 2011. Owners may contact chrysler at 1-800-853-1403.
Engine & cooling
2012 Chrysler 200 Engine problems
Owners have filed 161 complaints about the 2012 Chrysler 200's engine & cooling with NHTSA - 25% of all its complaints, most recently on April 21, 2026. They describe 1 crash, 1 fire and 0 injuries. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.
- Complaints
- 161
- Recalls
- 1
- Crashes
- 1
- Fires
- 1
- Injuries
- 0
- Deaths
- 0
Engine recalls for the 2012 Chrysler 200
Engine complaints
I was driving down a busy street, trying to make a left hand turn through traffic, and my car stalled without no warning and everything was locked including brakes. I took it into chrysler and they couldn't find anything wrong with it because no fault light was coming on. So they took the next step of putting a module on my car for 2 days to see if it happens again, but lucky for me it didn't because the first time was scary enough for me. Then when I took it back in they just told me that when my car does that...
Read the full complaint
just put it in neutral and restart it. So three weeks later my car did it again but this time I was on a busy freeway going 70 mph, so I tried their suggestion and it did not work, for the second time everything just quit working in my car. So I called them again talked to the manager at chrysler and he said if there is no lights coming on when my car does this he really can't do anything about it. *Tr
Tl* the contact owns a 2012 chrysler 200. The contact stated that there was an abnormal noise coming from the front end of the vehicle. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was unknown.
My 2012 chrysler 200 s stalled on a major highway. After coming to a complete stop due to traffic the vehicle would not accelerate, the steering locked up and then it shut off. There were no malfunction lights or any other type of warning called chrysler and they said that there are no recalls for this despite there being a number of complaints reported. *Tr
In march 2014 owner noted a problem with the hvac system - no heat was delivered to the passenger side air vents or heater vents in cold weather. During routine oil change mechanic noted severe discoloration of engine coolant and buildup up sludge in coolant expansion tank. Took vehicle to dealer for diagnosis. Dealer stated that the coolant had been contaminated with the addition of the wrong type of coolant. Per chrysler star # s1207000008, dealer flushed coolant system multiple times and commented that if that...
Read the full complaint
didn't work they would have to replace the heater core, radiator, oil cooler, and expansion tank. When repairs were completed owner noted that the temperature output from the air and heater vents was 20 degrees lower on the passenger side than the driver side. Dealer stated that repairs were complete. Owner is in process of contacting chrysler to have heater core and radiator replaced. *Tr
Brakes rotors bushings engine has whine and what sounds like a miss clicking noise on start up, clicking when turning ignition key withoht starting completely, and clicks when turning key off. Salesman says he called chrysler and was told the 200 car is made to veer to the right to stop driver who might accidentally go to sleep from entering oncoming traffic. Dealership said call warranty. Had this 2012 car a with 46k that was a rental for a few days so far its engine is quite noisy. Calling warranty company to make appt to have car checked out. *Js
Today, while on the interstate traveling at 60mph, attempted to accelerate and car would not accelerate. Could hear the engine trying to accelerate but the car kept slowing down. Did not see any lights (engine) light up on the dash to indicate a problem. Pulled into emergency lane, stopped and turned engine off; restarted car and it has not occurred again today. *Tr
Entering freeway was accelerating,merged into a lane and took foot off of the accelerator and the car rpms kept climbing and speed kept increasing within 10 seconds it stops and will respond normally usually happens when there is a quick attempt to accelerate. *Tr
Shifted the vehicle into reverse, when the vehicle is then put into drive there is a loud bang. *Tr
Vehicle engine light went on. Unable to accelerate. Vehicle stalled and pulled over to side of road. Happened 5 times in 16 mile trip. This occurred when vehicle has 18-20000 miles requiring towing of vehicle. At that time, repair involved wiring repair and replacement of sleeve. The problem has clearly recurred. This is a safety issue. *Tr
Tl* the contact owns a 2012 chrysler 200. The contact stated that after having his vehicle serviced for nhtsa campaign number: 13v282000 (air bags , electrical system) the check engine light illuminated at 50 mph. The vehicle was taken to a the dealer for inspection and they stated that the evac hose needed to be replaced due to the fact that a rodent had eaten the hose. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 33,122. Updated 02/11/14*lj the consumer stated there was a problem with the fuel tank evaporate hose.
Purchased vehicle on nov.1St.2013. Noticed when turning off vehicle there is a loud clicking sound on front right of vehicle. Had it checked by a mechanic and was informed that there was a sensor malfunction near the timing cover. Went to dealership and was told that this was normal for this model and make of vehicle. Someone is wrong,either the mechanic or the dealership. Who? *Tr
My car stalled on me about 3 times in august. Twice while driving at a low speed and once while parked. I took it chrysler and they said they didn't find anything. It happened again in september so I brought the vehicle back to chrystal and was once again told they could find nothing. After that while driving on the highway at about 40mph the car started to lose power and traction control, emergency brake and abs light lit up and the speedometer just waved back n forth. It felt like it was stalling and luckily I...
Read the full complaint
was able to pull over. I took it back to chrysler and told them its very dangerous and I can't drive the car like that. They then called me saying they found a loose battery terminal and to see if that helped. No it didn't. While driving on a highway again the car started to lose power and then stopped but did not stall. When I stepped on the gas it mad a noise but did not move. I had to shut it off and restart it. I will going back to chrysler for the fourth time to see if they will fix this dangerous problem. *Tr
Tl* the contact owns a 2012 chrysler 200. The contact stated that while driving 20 mph, the steering wheel became difficult to turn. The vehicle was taken to the dealer for inspection where they stated that there was no power steering fluid in the vehicle. The vehicle was replenished with power steering fluid but the failure recurred. The also contact stated that the power steering hose exploded and needed to be replaced. The vehicle was repaired. The manufacturer was not notified. The failure mileage was 6,047. ...
Read the full complaint
The consumer stated there were numerous problems with the vehicle, such as a coolant leak, oil leak, air condition, the cd player did not work, the power steering hose burst, the wire harness, the transmission was replaced, the engine was noisy and the seat belt on the passenger side was not properly installed. The vehicle cut off several times. Updated 10/31/13
In traffic, steering wheel tightened up and all interior lights were off. Tried to brake but no response, shifted into neutral restarted the car and it turned back on. Seemed to mess up the shifter a little in the process, as well as almost hitting the car in front of me. Probably going about 10-15 mph, and I was lucky to throw the car in neutral and restart otherwise I would of floated into an accident. *Tr
The chrysler 200 vehicle that I purchased in april 2012 was brought in again on 7/1/13 for service due to front end clanging metal noises which occur while turning, backing up, slowing and stopping. This undiagnosed noise began following several engine stalling episodes, two of which required towing (since I was unable to restart the vehicle to drive in for service). The engine stalling episodes occurred while driving at 55 mph and as stated, twice resulted in towing and service. Service on the engine stalling...
Read the full complaint
problem occurred in april and again in may 2013. It is unclear why the remedy for the engine stalling was not followed per the nhtsa recall id # 11v487000 (engine and engine cooling) technical service bulletin/chrysler manufacturer remedy- since that recall had already been published. In addition to this safety issue, the front end metal clanging may be the result of towing due to the engine defect and/or a result of another vehicle defect (recall #11v315000 - steering column). This is a vehicle that has multiple problems and poses a serious safety issue due to various problems. It needs to be off the road. *Tr
As I was driving my car it just stop running, there was no warning lights or nothing came on the car just stop. Then it would not start back up until the next day when it was at the dealership. They check the car out and they could not find anything wrong with the car. This is not the first time this happen and they still can not find out why the car is stopping. Then the lights came on the dash board and I took the car back to the dealer ship and they still could not figure out why they came on because the...
Read the full complaint
computer did not report that any lights came on. Then they keep my car over the weekend and they said the car ran fine even though they know the car did stop but since the computer couldn't tell them that there was something wrong with the car there is nothing that they can do. This is a very unsafe car..I wish I know this before I brought this car... *Tr
2012 Chrysler 200. When slowing then accelerating in turn about, the 200 will often stall for a second or two, then proceed. Seems to especially happen when attempting to increase speed quickly to enter traffic. The engine will stall and become unresponsive for a second or two before responding again. This has been unsettling a couple of times. This seems to occur when turning and accelerating. I do not have any issues when accelerating in a straight line. The second speed issue is that the 200 is slow to stop...
Read the full complaint
revving when accelerating. On several occasions upon acceleration, when I lifted my foot off of the accelerator, the engine kept revving for a couple of seconds and the car kept speeding up. This has not caused any safety issues. *Tr
2.4 Liter 2011 chrysler 200. When slowing then accelerating in left turn lanes and turn abouts, the 200 will often stall for a second or two, then proceed. Seems to especially happen when attempting to increase speed quickly to enter traffic. The engine will stall and become unresponsive for a second or two before responding again. The entire process is that I brake and slow for the turn or to enter a round about, when there is an opening, I accelerate, the 200 will speed up as expected, then the engine will...
Read the full complaint
suddenly stall and become unresponsive for 1-2 seconds, then resume as normal. This has been unsettling a couple of times. This seems to occur when turning and accelerating. I do not have any issues when accelerating in a straight line. The second speed issue is that the 200 is slow to stop revving when accelerating. On several occasions upon acceleration, when I lifted my foot off of the accelerator, the engine kept revving for a couple of seconds and the car kept speeding up. This has not caused any safety issues. It only happens when I accelerate quickly. When driving normal, this issue does not occur. *Tr
Tl* the contact owns a 2012 chrysler 200. The contact stated that while making a left turn at an unkown speed, the engine stalled and the steering wheel seized. The vehicle was taken to the dealer but the failure could not be determined. The failure mileage was 5,887 and the current mileage was 8,495.
I bought this car use with 27,000 mile on it. I have only had the car for 45 days or so. My car is jumping forward when I come to a stop. At first the lurching was very faint now at 31,000 miles the lurching is more pronounced. I took the car to the dealership prior to the warranty ending and they acted like they where unaware of the issue/or didn't understand the issue. Any way I am beginning to feel unsafe since it is happening more. The car lurched forward during a sudden stop one time, not good. *Tr
First time car wouldn't start. Dealership charged battery and did software update. Second time car wouldn't start they replaced battery. Third time car wouldn't start battery completely drained they said it was a glove box switch. Fourth time car wouldn't start they said it was the usb cable keeping the radio powered on all the time. Same chrysler dealership worked on it all four times. Brand new car bought august of 2012. All four times have been in less than two months! This car is not safe. Chrysler is not doing the right thing by their customers! Any help would be appreciated. In the usa we should not have to put up with being ripped off like this. *Tr
The first time this incident occurred I was preparing to make a left turn off of a busy road. I had just purchased the car and not really thinking something was wrong with my vehicle when the engine stalled. This incident has occurred very often since september of 2012. I have taken my vehicle to the dealership three times for the car stalling and cutting off during low speeds. I'm suppose to take it back again tomorrow but I'm very disappointed to know by reading other complaints the problem will not be fixed....
Read the full complaint
It's very sad someone or multiple people have to die before anything can be done about these cars. I have four kids and I am terrified for them to ride in the car with me. These cars are definitely not safe to be on the highway! Someone please offer some help!!! *Tr
When going over the bridge or entering into traffic car seem to stall, radio and light shutoff and give me a error message enter id code. Have been nearly rear ended by on coming traffic. The console for the heat controls have fell down and dealersays they cannot find anything wrong with it. Purchased the car in march of 2012 and have had problems since I bought it. I love car but hate all the problems that I am having and it's only been 9 months and took it back to dealer about 4 times already and have an appointment on 1/11/2013. *Tr
Tl* the contact owns a 2012 chrysler 200. The contact stated that when driving between 16-22 mph, the vehicle would hesitate. The vehicle was taken to the dealer for inspection where they stated that the vehicle was changing gears as it was designed. The vehicle was not repaired. The contact also stated that the steering wheel seized without warning. The manufacturer was notified and stated that there were no recalls on the vehicle. The failure mileage was 2,000. The consumer stated the very day they picked the...
Read the full complaint
vehicle up, it stalled in the entrance way. The dealer claimed, the vehicle ran out of gas. As her son drove the vehicle home, he noticed when coasting at low speeds, the vehicle would kick back. The mechanic stated the jerk/kick was from the engine shifting gears. The kicking would go away, when the accelerator pedal was pressed. When her son turned the steering wheel to the right and then straightened it out, by turning the wheel to the left, the steering wheel locked up. He put the vehicle in park and shut off the engine. He tried to re-start the vehicle several times, but the engine would rev up tight until it was about to start, but would immediately shut off. The vehicle was towed to the dealer, where they found a code, but it had nothing to with the problem, that was being experienced. Updated 01/16/13
Drove approximately 0.5 Miles when the engine started to kick back, drove another 0.5 Miles and as I was parking the car the steering wheel locked up. Put the car into park and turned off the engine. The car would no longer start as the engine would rev right up until the engine should flip over but the car just shuts down at that point. Waiting for a tow at this point to the nearest dealership. *Tr
Chrysler 200 engine complaints by year
200 engine problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data