When the transmission is cold the vehicle stalls having no control over forward or reverse motion with dangerous side bound traffic instances while refusing to shift with rwd rear axel severe vibration sensitivity causing total rwd rear axel power loss & coiciding transmission abnormalities. Powertrain malfunctions/dysfunctions resulting in a dangerously faulty suspensions stability & braking pressure strength causing pull in passenger side direction where vehicle seems dangerously the weakest & exhaust fumes abnormally recycling into vehicle cab system. Only has 140k original miles. Manufacture defects now becoming death trap & safety disaster to potential lives of others.
Suspension
2006 Chrysler 300 Suspension problems
Owners have filed 22 complaints about the 2006 Chrysler 300's suspension with NHTSA - 1% of all its complaints, most recently on September 6, 2019. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
- Complaints
- 22
- Recalls
- 0
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Suspension complaints
TRANSMISSION IS GOING OUT EVERY TWO YEARS
Tl* the contact owns a 2006 chrysler 300. While driving various speeds, an unspecified part became loose underneath the vehicle. Upon applying the brakes, the vehicle shook and the front driver and passenger side wheels seemed unstable. In addition, the check engine indicator remained illuminated. James ceranti motors inc (3064 us-82, greenville, mississippi 38703, (662) 332-7231) replaced the struts and the ball joints in an attempt to stabilize the vehicle, but the failure recurred. An independent mechanic was...
Read the full complaint
made aware of the failures and stated that the shaking of the vehicle was a result of faulty inner and outer tie rods. The vehicle was not repaired. The manufacturer was not made aware of the failures. The failure mileage was approximately 119,000.
The frontend has death wobble going on the highway more than 65mph I've had the whole front end replaced without solving the problem, the motor also was replaced due to one of the cylinder going right threw the motor and it happened again after motor over heated a year later
I have had constant issues with the control arms, tie rods, and the door handles are all broken. I had to replace my radiator twice now. I love my car, but I am highly disappointed with the costs that I have had with this car. The radiator issues have come while the car was in motion. My engine died without warning while I was driving. I never had any warnings prior to the motor blowing. I have regular maintenance done to my car, but a new engine, 2 radiators, tie rods, and control arm repairs/changes seem to be the continuum for my car. The door handles are cosmetic and have not been repaired. I have records from my dealership and another place I entrust with my vehicle.
Drivers side tire suspension collapsed while backing up, had car towed to dealer across street for evaluation.
I have a chrysler 300 c 2006 I've had it for about a year now it's definitely been causing my a lot off issues and I've done research on this car a lot of others having same issues as such as me . Issue such ass car stopping while driving after filling up gas tank , and lower control arms falling off car while driving which is not safe and I have a small child which can be deadly driving in this car for both of us. I can't afford to fix these issues I really need to know what I can do about this
1.The power steering on the car want let the steering wheeling turn some time it happen mostly in the morning time. 2. The front suspension keep wearing out tires very quilty I had the front end line more than one but that don"t help 3.The brakes want hold some time when I go to stop real fast I have to pump them more than once the brake have been change I need to know if there something wrong this parts. Also when I first bought the car the brakes gave out and the chrysler head brake staff group came to look at it. *Tr
Tl* the contact owns a 2006 chrysler 300. The contact stated that while driving approximately 10 mph and making a right turn, the vehicle stalled with the oil and engine light illuminated. The vehicle was able to restart. The vehicle was taken to an independent mechanic. The technician replaced the oil switch. However, the failure continued to occur. The vehicle was taken back to the independent mechanic who stated that the drivers side axle and the lower control arm needed to be replaced. The vehicle had not been repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 62,000.
Tl* the contact owns a 2006 chrysler 300c. The contact stated that while driving approximately 35 mph over a road bump, a loud abnormal noise was heard from the vehicle. The failure recurred whenever the steering wheel was turned in any direction. The vehicle was taken to an authorized dealer seven times for the failure. The rack and pinion and the front struts were replaced at different times but to no avail. The manufacturer was not notified of the problem. The approximate failure mileage was 71,000.
Tl* the contact owns a 2006 chrysler 300. The contact stated that while driving approximately 60 mph, a loud rattle noise was heard from the driver's side of the vehicle. In addition, the vehicle jerked abnormally and without warning. The vehicle was taken to a private mechanic where it was diagnosed that the rocker arm assembly needed to be replaced. The manufacturer was made aware of the failure. The vehicle was not repaired. The approximate failure and current mileage was 110,458. *Tr
The engine started ticking noticeably on the upper right side of the engine. The noise was typical of a lifter or worn rocker arm. About a month earlier the car had a shifting problem with the automatic transmission on an interstate highway under acceleration. The car was checked for the transmission problem at a chrysler dealership but nothing was found after diagnostic testing was completed they did advise they found the strut bushings were in need of replacement. After hearing the engine noises the car was again...
Read the full complaint
taken to the chrysler dealership. Both sides of the engine had the rocker arm assemblies replaced. The bushings for the struts were replaced. Both of the tie rod ends were found to be in need of replacement while they were trying to realign the front end. The alignment was needed after replacing the strut bushings. The car was well maintained and oil changes & lubes were done at or near every 3,500 miles. There are a massive amount of replacements/repairs being done for these particular parts failing at a low mileage.These parts are failing prematurely and chrysler should take the initiative & recall these components. Reimbursing customers that have become dissatisfied with their cars and it's manufacturer are being burdened with unnecessary repair costs. I was fortunate enough to have purchased an extended warranty which covered all the costs (over $2,000.00) . I still had to pay the deductible. Nhtsa needs to find out what is happening and hold the manufacturer accountable. This was the first time I had to have repairs done since purchasing the car in 2008 with about 30,000 miles on the odometer. Dependability is one of the most important parts of owning a car and we all pay a lot of money to purchase/lease them. Paying for routine maintenance is expected but exorbitant repair costs are unacceptable when a car is properly cared for and not abused. *Tr
Radiator fan went out,i replaced at my own expense,as of 2/25/2012 was notified by chrysler to bring to dealer to have replaced ? In process now of being reimbursed,having trouble with power window controller on driver door,now the auto return for the seat and steering wheel does not work,u no what chrysler just fix the problem or pay the bill, you're owned by the same people that own our company which is fiat! Now I'm having problems with driver side front ball joints squeaking, shouldn't happen at 50,000 mi. *Tr
Tl* the contact owns 2006 chrysler 300. The contact stated that the vehicle was taken to be aligned and to have new tires installed. A snapping noise was heard once the vehicle was placed on the lift and lifted into the air. The trailing arm on the rear suspension snapped. The dealer was notified and the contact was informed that the manufacturer began to use a strong type of metal during model year 2009 due to this common failure. The vehicle was repaired. The failure and current mileages were 62,230. Updated 09/07/2011 *ln *tr
Chrysler 300c 2006, outer tie rod broke at 30k and again at 37k miles. I bought car new, and it always had a vibration dealer told me at all complaints there was nothing wrong and it was tires. Replaced/changed tires after 30k tie rod change, and it did little for vibration. On state inspection today, was shown that tie rod had 1/2 inch of play on replacement mopar part. Search online finds that this is a common complaint. *Tr
TIE RODS, ROCKER ARM. *TR
The strut tension arms and tie rod ends had to be replaced at 68,000 miles. They were rusted due to there was no nipple to lubricate them. The mechanic said in another 60,000 miles the same thing will happen. This was an $800 repair. *Tr
On june 11, 2009 I went in to have tires put on my 2006 chrysler 300 at southern tire, lexington park, maryland. The mechanic called me to inform me that the inner tie rods needed to be replaced prior to putting tires on the vehicle, and that he had called the local dealership, park dodge, chrysler jeep and was told that the part was on back order for 6 months and there was a total of 3,123 on back order. I went to the dealership myself the same evening after speaking with the parts manager by phone and ordered...
Read the full complaint
the part ( p/n 68028831ac) but was told the same thing. He informed me that I should call the customer care line at chrysler for further assistance. I called the customer care line that evening to express my concerns and was told that because of the state of chrysler I should understand. I expressed to ask a customer to wait 6 months for a part was unreasonable. I was told to give them 48 hours to make a decision as to how to help me and some one would contact me. On june 12th I arrived home and there was a message on my answering machine stating that chrysler would not be able to assist me with a rental or loaner car because my car is out of warranty (92,000 miles). I called the customer care center and asked to speak with a supervisor. The supervisor informed me that they would have to contact the dealership and that she would call me back the next working day. I received no call. I continued to call around and go onto the internet in search of the part and to no avail it was not found. Chrysler has told me it is on national back order and they are working to get the part as soon as they can but there is nothing they can do for me. I drive almost 150 miles a day to work. My front tires are getting very bad and the left one is "coupling" according to the mechanic. I don't feel safe in the vehicle. Why are there so many parts on backorder and none in the country if this is not an issue with this make and model vehicle? *Tr
1. Driving on an overpass. Made a left turn toward ramp to get onto i5 north. 2. During the turn, I heard and felt a huge "clunk" sound from the right front of car. I continued to drive thinking I may have just run over a rock or something. After a few weeks the car began pulling to the right while driving and eventually began vibrating harshly when driving at highway speeds. 3. Being a "shade tree" mechanic, I pulled the wheels and checked the suspension. I noted that the tie rod ends seemed to be shot. ...
Read the full complaint
This is a 2006 chrysler 300 touring with only 62,000 miles! I purchased the parts and replaced the outer tie rod ends. I took note that the original equipment tie rod ends did not have any way of lubricating the tie rod ball joint. There were no grease points that would allow proper maintenance of this part. I removed the boot from one of the old ends and noticed there was very little grease in the joint and there was scarring on the ball where there had been metal to metal contact between the ball and the housing. This caused the ball to wear prematurely and eventually caused the part to fail completely. A part of my oil change ritual is to have the lubrication points greased. Tie rod ends are moving parts which need lubrication in order to remain in good condition. The fact that chrysler is using parts with no provision for lubrication is insidious and smacks of extortion.
What was done to correct the failure; i.E, parts repaired or replaced (and if old part is available). *Tr
All four tires on my car are feathered and worn out on the outer edge.*Ak
Dt*: the contact stated while driving 40 mph the vehicle started shaking and veered to the left without warning. The vehicle was driven to the dealer where it was determined the rear passenger lower control arm fractured and needed to be replaced.
Chrysler 300 suspension complaints by year
300 suspension problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data