On certain vehicles, the right front steering knuckle may have been improperly manufactured. Because of a broken cooling line, parts cast in tool cavity #63 on july 18 and july 19, 2006, may have a cold shut condition and could fracture.
Steering
Chrysler Aspen Steering problems by year
31 complaints filed with NHTSA about the Chrysler Aspen's steering. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
Steering complaints by model year
Steering recalls
Latest Aspen steering complaints
Tl* the contact owns a 2008 chrysler aspen. The contact stated that after entering the vehicle, it was discovered that the middle clip covering the air bag assembly on the steering wheel was deformed. The cause of the failure was not determined. An unknown dealer and the manufacturer were notified of the failure. The failure mileage was 189,000.
Power steering lines touch the drive train. I lost steering control while driving 70 miles an hour. The high side pressure line blew out.
Steering problems had rack and pinion replaced, inner tire rods replaced, lost control of vehicle, outer right tire rods broken, very fortunate my family and I not hurt (70mph on i95), replace outer tire rod, play in steering replace steering yoke. Also water gets into electrical system shorting out computer. Do not know how water gets in, can not see from inside of vehicle, but can sometimes hear water sloshing around.
While driving, the vehicle intermittently slipped into 4-wheel drive low. Vehicle immediately became hard to steer/move in this condition, dangerous to drive as the vehicle's handling could change at any moment... At any speed.
There is a recall on the right steering knuckle on my type of vehicle, including same year, make and model. I did not ever get a recall notice, but was involved in a crash where the right steering knuckle broke and caused significant other damage to my vehicle. The vehicle was not safe to drive, so I was forced to file a claim with my insurance to have it fixed. I had to pay a large deductible and was faulted for the accident. What can I do to get reimbursed for this since there is a recall on that part of the vehicle?
The svc 4wd light comes on when idling and other random times. The steering acts like its in 4 wheel drive when it isnt. There is a shifting of some kind when the engine isn't on and the doors are unlocked remotely.
Tl* takata recall. The contact owns a 2007 chrysler aspen 4x4. The contact stated that the wheels randomly locked and the traction control warning indicator randomly flashed. As a result, the power steering was extremely affected and the steering wheel was difficult to maneuver as the front and rear wheels locked up. In addition, the four wheel drive indicator randomly flashed and the gears independently shifted at a low rate of speed. The vehicle was not inspected and diagnosed by a dealer. The manufacturer was notified of the failure. The vin was also included in nhtsa campaign number: 16v352000 (air bags). The approximate failure mileage was 147,000. Vin tool confirms parts not available.
Tl* the contact owns a 2007 chrysler aspen 4x4. While driving various speeds, the steering wheel suddenly loosened and became difficult to keep sturdy. The dealer diagnosed that the right steering knuckle failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure was related to nhtsa campaign number: 06v386000 (steering); however, the vin was not included in the recall. The vin was invalid. The approximate failure mileage was 200,000.
After filling the fuel tank, the motor shuts off while driving down the road. It used to only happen when you go past the first "click" of the gas pump. Today it did it by just filling the tank to first shut off. This leaves you with no steering, no brakes and no power while going down the road. This is dangerous on several levels. This happened while the vehicle was moving down a four lane road in moderate traffic with five passengers-two infants, two children and one adult.
Hello, I am the owner of a 2008 aspen. I recently took the vehicle to a safety car seat checkpoint and was recommended to contact you by the officer concerning the seat belts. They don't lock when pulled all the way out like other vehicles (i.E. Notable resistance when trying to secure a car seat in place). I have also noticed this when switching car seats in a durango that my brother owns. I know the belts lock upon braking the vehicle. Also, I have had an issue where the vehicle has shut off, and I...
Read the full complaint
have lost power steering and all electrical control after topping off at a gas station. We promptly took it to the local dealer who did a computer update but it continues to happen anytime we top off with gas. As long as we don't overfill above the first click of the gas handle, the vehicle doesn't cut off spontaneously while driving. My husband has visited forums online where this has been as issue for other owners. Fortunately, I was in a neighborhood two miles down the road when it cut off with me and my children so was able to coast to a stop. However, I feel it is a big safety issue as it doesn't happen immediately and if I had been on a busy road could have potentially resulted in an accident as I had no control of the vehicle.
The clock spring is broken. Chrysler doesn't have the part and claim it is not a safety issue. I think anything involving the inflation of the airbag is a safety issue.
Tl* the contact owns a 2008 chrysler aspen. While driving approximately 25 mph, the engine warning indicator illuminated and there was a complete loss of power steering. The vehicle was maneuvered to the side of the road and the engine was turned off. After restarting, the vehicle resumed normal steering function. The vehicle was taken to the dealer for diagnostic testing. The mechanic was unable to duplicate the failure. The manufacturer was notified of the failure. The approximate failure mileage was 150,000.
I purchased a 2009 chrysler aspen hybrid with about 20,000 miles on it. Since purchasing the vehicle I have had several problems with the vehicle. The tie rod ends have failed three times on the vehicle and the vehicle will randomly stall out or quickly accelerate. This has happened on several occasions and put me, my family, and others not he road at risk of serious injury. It has happened in parking lots and while pulling out into traffic out of parking lots. I have been working with chryslers customer care...
Read the full complaint
department and technical department since may of this year. Their approach has been to place a data recorder in the vehicle and have me drive it - again putting me and others on the road at risk. While the data recorder was in the vehicle, there were 3 failures. Unfortunately the data recorder also failed and did not capture anything. I have attached as many of the service records as I could. There are more though. I also have videos of the failures.
The clock spring/steering sensor has gone out on my aspen. What I was told by dealership is it has gone bad on so many aspen and other chrysler cars using this part that it is on back order and may take up to 6 months to get one... This part has caused my anti-lock brake, skid control and my all wheel drive to no longer work
Tl* the contact owns a 2007 chrysler aspen. While driving 60 mph, when the vehicle encountered a bump in the road, the steering wheel would jerk and cause the contact to lose control of the steering. The failure recurred twice. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 1,000.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data