The bonded disc brake linings may separate from the shoes due to a bonding deficiency which may allow corrosion degradation of the bond attachment.
Brakes
Chrysler Lebaron Brake problems by year
46 complaints filed with NHTSA about the Chrysler Lebaron's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.
Brake complaints by model year
Brake recalls
Mismatched parking brake cable lengths to the rear wheels reduces braking ability of one of the rear wheels, in violation of fmvss 105.
Front disc brake caliper guide pin bolts may not have been adequately torqued and could loosen.
Hydraulic brake tubing routed to the left rear wheel brake system may have been bent out of shape during assembly and could chafe against the exhaust system hanger bolt.
On the involved vehicles, improper routing of the hydraulic brake tube could cause it to chafe against the park brake cables. Eventually, the brake tube may fail and brake fluid leakage may occur.
The brake hydraulic system bay be equipped with brake fluid containing an excess of water.
The front brake hose routing on the involved vehicles may allow interference between the hoses and the front tires during extreme turning angles.
On the involved vehicles, damage to the front wheel brake hydraulic system could occur due to front wheel brake line tube corrosion. Front wheel brake hoses may become brittle and crack due to prolonged operation in cold temperatures.
Latest Lebaron brake complaints
Tl* the contact owns a 1991 chrysler lebaron. The contact stated that while driving 50 mph, the brakes became hard to apply while attempting to stop the vehicle. The contact referenced nhtsa campaign id: number: 90v162000 (service brakes, hydraulic:foundation components:disc:caliper) but due to the age of the vehicle the manufacturer was unable to identify the recall. In addition, the contact noticed that the driver side air bag sensors were malfunctioning and the contact was concerned that the air bags would not...
Read the full complaint
to deploy if involved in a crash. The passenger side seat belt had also failed and could not be secured. The contact also mentioned that the parking brake had failed and the vehicle could not be parked on an incline. The contact did not take the vehicle to the dealer or a local mechanic for inspection or repairs. The failure mileage was 36,000. Updated 03/28/12*lj
Rear brake lining separated from the brake shoe. The loose shoe was still in place captured by the caliper. Consumer's 1990 vehicle was not part of recall 92v017000. Dealer replaced the rear brakes. However, one of the brake linings separated from the shoe again. Consumer felt this was a serious safety issue. *Tt
A rear brake lining separated from the shoe. I found the problem the first time while greasing the rear wheel bearings. The loose shoe was still in place captured by the caliper. I reported the problem to my dealer. I was told there had been a recall: campaign number 92v017000, but my 1990 vehicle was not part of the recall since it effected 1989 models. However, I convinced the dealer I did have the problem since I had a lining that separated from the shoe. The dealer replaced my rear brakes at that time. ...
Read the full complaint
I have no record of the service date, and the dealer claims he has no record, although he also has no record of the recall service that was done to correct a problem with water collecting in a rear wheel well either. Two days ago, I was again greasing the rear wheel bearings on this vehicle and I discovered the exact same problem! One of the brake linings was separated from the shoe again! I am very concerned for two reasons. First, the original recall did not correct all the defective brakes. My 1990 chrysler lebaron obviously had the problem even though chrysler insisted it effected only 1989 models and my vin number was not included. Second, parts used after the recall was announced, still exhibit the same problem. This is a serious safety issue!
THE LEFT REAR WHEEL DRUM BRAKE FROZE UP. NLM
When coming to a stop and brake pedal is applied it feels like normal, but the brakes will activate and stop the vehicle. Then they release, permitting the vehicle to continue to roll. Dealer has been cnotacted, but the problem cannot be duplicated because it is intermittent. *Ak
Front brake disc caliper piston fractured, resulting in brake fluid leakage. Brakes replaced twice in four years. The dealer has been notified. *Ak
Brakes failed to stop vehicle resulting in collision, no deployment of driver's side air bag during vehicle collision. Mjs
Backing out when brakes/emergency brakes failed to operate properly. Towed to mechanic. Had pads, rotors, hydraulic assembly & accumulator replaced. 2Nd time in parking lot & was unable to stop vehicle due to brake problem (9/13/98). 3Rd time had dropped daughter off & vehicle failed to stop at crosswalk due to brake failure. Had vehicle towed a 3rd time & had everything replaced, including the pump (2/13/99). *Ak
Brakes make a clicking noise, 2. Oil leakage appears underneath of vehicle, 3. Electrical windows will not go up after being put down, 4. Engine stalls out when driving and vehicle dies out. Dealer contacted and aware of problems. Problems still exists. Provide further information. *Ak
Consumer was traveling at 55pmh. When was rearended while applying brakes. Also, the passager's air bag deployed. The consumer contacted the dealer for parts. *Ak
The brake rotors on the front end of the vehicle had to be rotated and replaced twice. *Ak
Parking brake has failed and been replaced three times.
BRAKES FAILED.
ANTI LOCK BRAKES FAILED CAUSING LOSS OF CONTROL.
BRAKE PADS REPLACED.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data