Dodge CB300 Problems by year

Due to a combination of disc brake pad wear and turn stop wear on certain vehicles, there may be an increase in brake pedal travel and a reduction in front braking effectiveness following a full turn. Also, a frame crack could develop and could extend through...

The federal motor vehicle safety standard certification labels on the involved vehicles may contain incorrect data for the incomplete vehicle (chassis) date of manufacture and for the date of federal motor vehicle safety standard conformance effectiveness.

The front rail extension may experience fatigue cracking near the area where the power steering gear attaches to the frame. If the crack progresses through most or all of the rail section, steering system free play accompanied by metallic rattle noise will be...

Condensate water may accumulate in the air conditioning blower housing; there is a high probability that this water will cause the blower motor to fail. Blower motor failure would disable the air condtioning unit and there would be no way to defrost or defog...

The front brake hose routing may allow interference between the hoses and the tire and wheel assemblies during extreme turning angles.

Lower control arms may fracture in the area adjacent to the lower ball joint, resulting in separation of the ball joint from the arm.

Incorrect steering linkage components may have been installed on the involved vehicles. These vehicles were assembled with light duty steering linkage tie rod and center link assemblies in place of the specified heavy duty components. These light duty...