Dodge W200 Problems by year

Automatic transmission may contain a park sprag rod assembly that may stick in the tooth butt unengaged position.

Due to improper material construction the hydro-boost fluid return hose may not be capable of withstanding the temperatures and/or pressures experienced with the hydro-boost system. Also, the hydro-boost fluid high pressure hose assembly may have been...

Improper routing of the "hydroboost" hydraulic system high pressure hose assembly could allow a tubular section to contact the frame side rail. Abrasion from the contact could result, causing a leak in the hose assembly.

An intermediate steering shaft containing a mismatched pot coupling assembly may have been installed on the involved vehicles. This coupling may have an oversized serration diameter. An oversized serration could prevent the coupling from adequately tightening...

The fuel tubes (fuel tank to pump) on the involved vehicles may be routed such that tube to underbody reinforcement flange interference may result during vehicle operation. Tube abrasion caused by such interference may result in fuel leakage.

The front driving axle wheel hubs on the involved vehicles may fail due to improperly machined spindles. This error may prevent the wheel hub and bearing from seating properly, causing bearing failure and eventual hub fracture. Also, the front wheel could...