Ford Probe Problems by year

Certain aj motorsport combination lamps sold as replacement lamps for use on the above listed passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no...

Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle...

Certain spx filtran fuel filters with a 45-degree angle inlet tube, model 800f350-s1, sold as replacement filters for 1993-1997 ford probe,1993-2001 mazda 626 and mx-6, and 1983-1994 loyal, 3-door coupe, hatchback, sedan, wagon, brat, dl, gl, gl-10, rx, xt...

Vehicle description: passenger vehicles. An external spring in the timing belt tensioner can break and get caught in the timing belt.

Note: passenger side (right) seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

Note: driver's side (left) passive seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

The supplementary air bag inflatable restraint caution label located on the driver side sun visor does not contain the statement, "do not install rearward facing child seats in any front passenger seat position." This does not comply with the requirements...

The passenger side air bag has an inflator body that cracked during forming of the curl that retains the igniter plug in the end of the inflator. Also the igniter end cap can separate from the inflator.

If the passenger-side air bag deploys in an accident and there is no passenger in that seating position, the air bag can detach from, and deform, the mounting bracket.

The groove for the rear wheel bearing retainer ring was incorrectly machined.

Vehicle description: passenger vehicles. The lower pivot pin that joins the liftgate gas strut to the body can separate from the lower strut mounting bracket due to an undersized rivet head.

Brackets mounting automatic shoulder belt retractor assembly may have an understrength spot weld.