- The problem
- Winnebago is recalling 1,699 my 2005-2009 winnebago journey, tour and itasca meridian and ellipse motor homes built on the freightliner xc chassis. The chassis contains steering filters that can plug due to failure of the screen adhesion to the filter housing causing a rise in return line pressure potentially leading to a hose separation from the filter or steering gear fitting resulting in a sudden loss of steering fluid and power assist.
- The risk
- Sudden loss of steering assist without warning involving a motor home could be a problem for certain drivers increasing the risk of a crash.
- The fix
- Freightliner is conducting this recall and will replace the affected filters with a larger filter (please see 07v570). Owners May contact freightliner at 1-800-547-0712 or winnebago at 1-641-585-3535.
Steering
2006 Itasca Meridian Steering problems
Owners have filed 1 complaint about the 2006 Itasca Meridian's steering with NHTSA - 100% of all its complaints, most recently on June 6, 2006. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
- Complaints
- 1
- Recalls
- 2
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Steering recalls for the 2006 Itasca Meridian
- The problem
- On certain motor homes, the cinch bolt, where the steering column connects to the intermediate shaft, was improperly tightened. This could result in the bolt threads being stripped, conceivably not providing a tight joint.
- The risk
- If the joint is loose, the intermediate shaft has the potential to slip off the spline shaft of the steering column causing loss of steering control. This could result in personal injury or vehicle and property damage.
- The fix
- Dealers will inspect and replace the cinch bolt and nut. The recall began november 4, 2005. Owners may contact winnebago at 641-585-6939.
Steering complaints
I have discovered a severed wire on the brake pedal assembly of the freightliner chassis on which our 2006 itasca meridian motorcoach is built. Pictures are available showing the broken wire on the brake pedal assembly under the floor. Apparently the grease fitting on the steering column shaft was the mechanism that snagged the wire. The brake pedal assembly and the steering column shaft are in "very" close proximity and there is no shielding or protection for the wiring on the brake pedal assembly. Freightliner custom chassis customer support indicated that had both wires been severed the vehicle would have lost braking. *Nm
Itasca Meridian steering complaints by year
Meridian steering problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data