Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2000 Kawasaki KLR650 Problems, complaints & recalls

Owners have filed 8 complaints about the 2000 Kawasaki KLR650 with NHTSA, most often about the engine & cooling (7) and the equipment & accessories (1). There are no recalls for it. For comparison, the 1999 has 7 and the 2001 has 19.

NHTSA data checked

DMore problems than a typical KLR650 year, for its age

#216 most complained-about 2000 vehicle

Complaints
8
Recalls
0
Crashes
0
Fires
0
Injuries
0
Deaths
0

Most common 2000 Kawasaki KLR650 problems

Share of all 8 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

No recalls for the 2000 Kawasaki KLR650

NHTSA lists no recalls for the 2000 Kawasaki KLR650. Recalls can be announced at any time - this page updates daily.

What owners say

Be the first KLR650 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

8 complaints about the 2000 Kawasaki KLR650

Newest first, as filed with NHTSA by owners.

Engine & cooling

The torsion spring on my klr 650 failed. This is a major problem and happens to alot of klr 650 owners. Lucky for me it didn't cause the engine to seize while I was riding. *Tr

Filed Incident EngineNHTSA 10562606
Engine & cooling

I have only owned this 2000 kawasaki klr650 for a few months now and had 8766 miles at the time! I had read on the internet that the idler shaft lever(kawasaki part no. 13168-1436) And spring(kawasaki part no. 92144-1860) Put in every klr650 since 1996 were prone to failure. Due to poor quality steel and poor manufacturing! Which can cause the timing chain to seize, which results in the engine seizing, and if this were to happen while riding would cause the rear wheel to seize. Which would cause damage, injury,...

Read the full complaint

possibly an accident and death! Sure enough a friend of mine who is a motorcycle mechanic helped me check into this and we did find that my idler shaft lever was indeed broken, my spring was missing and my timing chain was barely hanging on!!! Like I said mine only had 8766 miles but the part had failed way before that and I have read on the internet that they have failed with less than 2000 miles. I am still in the process of trying to find the spring and other pieces of the idler shaft lever in side the engine! To fix this I replaced the broken idler shaft lever with a professionals machined 1 piece out of stainless steel made by www.Eagle-m-e.Com and replaced the spring with a new one also from www.Eagle-m-e.Com. *Jb

Filed Incident Engine and engine coolingNHTSA 10153577
Engine & cooling

The classic kawasaki klr 650 balance shaft tensioner failure. 2000 Model year motorcycle maintained as per factory recommendations broke a balance shaft system. Occurred at low speed so it was not dangerous as if it happened at speed. That was the first failure. Recently I found it was cracked during service of the water pump. Installed the 3rd adjuster at that point. Recently I found aftermarket parts to prevent future failures as this is actually a very common problem on these motorcycles as the get high in miles. At this point I have had 2 failures of a part that is a very well known about. Just look at "known issues" here http://www.Bigcee.Com/klr650faq.Html#intake. *Jb

Filed Incident Engine and engine coolingNHTSA 10104014
Engine & cooling

BROKEN DOOHICKEY INSIDE MOTOR. *AK

Filed Incident Engine and engine coolingNHTSA 10051233
SteeringEngine & cooling

I own a 2000 kawasaki klr 650 dual sport motorcycle which I purchased new. I have kept up with scheduled maintenance as required. The idler shaft lever and idler shaft spring were both broken. There were 3 broken engine parts inside the crankcase which can cause the engine to lock up. The dealership was made aware of this problem.*Ak

Filed Incident Steering · Engine and engine coolingNHTSA 10032798
Engine & coolingEquipment & accessories

I own a 2000 kawasaki 650 klr dual sport motorcycle (i am the original owner), I have kept up with scheduled maintenance...The same part(s) failed twice within the engine, causing metal part fragments to get circulated within engine casing damaging engine parts , which could have led to dangerous failure of motor while riding... The parts that failed were the idler shaft lever and idler shaft spring first incident occurred november/2002 second incident occurred june/2003. *Jb

Filed Incident Engine and engine cooling · EquipmentNHTSA 10023897
Transmission & drivetrain

Transmission locked up while going 50 mph down a gravel road. Rear wheel locked up causing an uncontrolled slide to a stop. Just got off the freeway doing 75 mph

Filed Incident Power trainNHTSA 10002623
Engine & cooling

This involves engine part #13168-1436 (lever, idler shaft) in the adjustment mechanism of the engine's balancer tensioner system. I have removed a failed lever, idler shaft from my klr650 engine. I have also assisted in the inspection of this part in other klr650 engines and have found other instances of failure. In my experience, this component has two modes of failure: weld separation, and breakage of the toroidal-shaped section that mates with #39115-1077 (shaft-idler). Kawasaki customer service has...

Read the full complaint

placed the blame for the failure of this component onto their customers for not having performed their engine maintenance in a timely fashion. On the contrary, the very act of adjusting this mechanism may precipitate component failure. The proper adjustment of this mechanism involves the loosening and re-tightening of adjuster bolt #92150-1394 (bolt,6x16). The loosening of this bolt any further than 2 turns or so permits the lever, idler shaft to partially/completely disengage shaft-idler and slide downward and out of alignment with the mating surfaces of shaft-idler. The re-tightening of bolt,6x16 causes the lever, idler shaft to become wedged or break if the recommended torque is applied to this bolt. Failure not in connection with the adjustment procedure has also been observed. Lever, idler shaft mates onto shaft-idler with a very loose fit. The normal crankshaft speed variations present in a single cylinder engine are likely to promote counterbalancer drive chain whip which in turn causes a cyclic rotation of shaft-idler. This movement is arrested by lever, idler shaft which eventually fails from the resulting fatigue. A better fit of lever, idler shaft onto shaft-idler would suppress this damaging rotation. I believe that these issues present safety hazards due to the strong possibility of one or more of these failed components becoming shrapnel and causing the breakage or derailment of the counterbalancer and/or camshaft drive chains.

Filed Incident Engine and engine coolingNHTSA 10000938

Kawasaki KLR650: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20036000Engine & coolingC
200211000Engine & coolingD
200119000Engine & coolingF
20008000Engine & coolingD
19997000Engine & coolingC
19986000Engine & coolingC
19971000Engine & coolingA
All KLR650 years

2000 Kawasaki KLR650 vs rivals

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2000 Kawasaki KLR650? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2000 Kawasaki KLR650

Does the 2000 Kawasaki KLR650 have any recalls?

NHTSA lists no recalls for the 2000 Kawasaki KLR650 right now. Recalls can be announced at any time, and this page checks NHTSA every day. You can also check your exact vehicle by VIN at nhtsa.gov/recalls.

What are the most common problems with the 2000 Kawasaki KLR650?

By the complaints owners filed with NHTSA, the most common problem areas are the engine & cooling (7), equipment & accessories (1), steering (1).

How many complaints has the 2000 Kawasaki KLR650 had?

8 complaints have been filed with NHTSA, the first on January 10, 2003 and the latest on February 3, 2014. Of these, 0 describe a crash and 0 a fire, and together they report 0 injuries and 0 deaths.

Is the 2000 Kawasaki KLR650 a reliable vehicle?

Its Safety Index is 39 out of 100 (grade D: more problems than a typical Kawasaki KLR650 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Kawasaki KLR650 years have the most complaints?
What should I do if my 2000 Kawasaki KLR650 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience