- The problem
- PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
- The risk
- If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
- The fix
- PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
Vehicle safety record
2014 Kenworth T270 Problems, complaints & recalls
Owners have filed 1 complaint about the 2014 Kenworth T270 with NHTSA, most often about the wheels & tires (1). It is covered by 6 recalls, the latest in April 2020 for the electronic stability control (ESC). For comparison, the 2013 has 0 and the 2015 has 1.
NHTSA data checked
DMore problems than a typical T270 year, for its age
#405 most complained-about 2014 vehicle
- Complaints
- 1
- Recalls
- 6
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Most common 2014 Kenworth T270 problems
Share of all 1 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2014 Kenworth T270 recalls 6
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
- The risk
- As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.
- The fix
- PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.
- The problem
- PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between August 7, 2013, and November 3, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."
- The risk
- If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
- The fix
- PACCAR will notify owners, and dealers will inspect and replace the seat belt buckles, as necessary, free of charge. The recall began on March 31, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's number for this campaign is 14KWC. Peterbilt's number for this campaign is 114-B.
- The problem
- PACCAR Incorporated (Paccar) is recalling certain model year 2014 Kenworth T170, T270, T370, T440, T470, T660, T680, T700, T800, T880, C500 and W900 trucks manufactured July 1, 2013 through September 17, 2013. In the affected vehicles, the plastic housing of the Stop/Tail/Turn (STT) lamp can shrink and allow the light bulb to fall out of the mounted retention ring. As such, the Stop/Tail/Turn light would not be illuminated, and the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108 "Lamps, Reflective Devices, and Associated Equipment."
- The risk
- If the stop/tail/turn light is not illuminated, the driver's intentions would not be communicated, which increases the risk of a crash.
- The fix
- Kenworth will notify owners, and dealers will replace the defective STT lamps with new lamps. The recall began on February 4, 2014. Customers may contact Paccar at 1-425-468-7400. Kenworth's number for this recall is 13KWM.
- The problem
- PACCAR is recalling certain model year 2014 Kenworth T170, T270, T370, T470, T660, T680, T800, T880, and W900 trucks manufactured May 6, 2013, through May 17, 2013; and model year 2014 Peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389K, 567, 579 and 587 trucks manufactured May 1, 2013 through May 17, 2013. An internal defect in the ignition switch causes the starter to engage when a key is partially inserted, before the key is turned.
- The risk
- Unintended engine startup could cause injury to a person working in the engine compartment. Vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.
- The fix
- PACCAR will notify owners, and dealers will replace affected ignition switches, free of charge. The recall began on June 14, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000. Kenworth's recall campaign number is 13KWF. Peterbilt's recall campaign number is 0513-E.
- The problem
- PACCAR is recalling certain model year 2014 Kenworth T270 and T370 trucks, manufactured from January 31, 2013, through February 4, 2013. The left hand seat belt floor pan reinforcement bracket was not positioned correctly during assembly. This could result in the failure of the seat belt anchor mounting.
- The risk
- In the event of a crash, the failure in the seat belt anchor may increase the risk of injury.
- The fix
- PACCAR will notify owners, and dealers will remove, reposition, and reinstall the reinforcement bracket free of charge. The recall began on April 15, 2013. Owners may contact Kenworth at 1-425-828-5000.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
1 complaints about the 2014 Kenworth T270
Newest first, as filed with NHTSA by owners.
Tire sidewall separation. Multiple tires. Regul gl283a 245/70r19.5 Guizhou tyre corp
Kenworth T270: every year compared
All T270 years2014 Kenworth T270 vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2014 Kenworth T270 | 1 | 6 | D | |
| 2014 Kenworth T680 | 10 | 13 | C | Compare |
| 2014 Kenworth T880 | 1 | 12 | C | Compare |
| 2014 Kenworth T660 | 1 | 11 | D | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2014 Kenworth T270
Does the 2014 Kenworth T270 have any recalls?
Yes - NHTSA lists 6 recalls for the 2014 Kenworth T270: electronic stability control (ESC) (April 2020); motor (May 2015); seat belts (January 2014); tail lights (December 2013) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2014 Kenworth T270?
By the complaints owners filed with NHTSA, the most common problem areas are the wheels & tires (1).
How many complaints has the 2014 Kenworth T270 had?
1 complaints have been filed with NHTSA, the first on January 24, 2017 and the latest on January 24, 2017. Of these, 0 describe a crash and 0 a fire, and together they report 0 injuries and 0 deaths.
Is the 2014 Kenworth T270 a reliable vehicle?
Its Safety Index is 33 out of 100 (grade D: more problems than a typical Kenworth T270 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Kenworth T270 years have the most complaints?
2014 (1), 2015 (1). See every Kenworth T270 year compared.
What should I do if my 2014 Kenworth T270 has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data