Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
Driver assistance
Mazda CX-3 Driver Assist problems by year
19 complaints filed with NHTSA about the Mazda CX-3's driver assistance. Phantom braking, automatic emergency braking, lane keeping, blind spot and collision warnings.
Driver Assist complaints by model year
Driver Assist recalls
Latest CX-3 driver assist complaints
The instrument cluster in my 2021 Mazda CX-3 failed at approximately 50,000 miles. While driving, the vehicle displayed multiple warning lights, including Dynamic Stability Control (DSC), Smart City Brake Support (SCBS), traction control, and front camera/safety system warnings. These safety systems became unavailable due to the instrument cluster failure. An authorized Mazda dealership inspected the vehicle and attempted to reprogram (re-image) the instrument cluster, but the repair was unsuccessful. The...
Read the full complaint
dealership confirmed that the instrument cluster had failed internally and must be replaced. The failed component is available for inspection. Mazda Customer Experience has confirmed that the replacement instrument cluster is on national back-order and has been unable to provide any estimated availability date. As a result, I am required to continue driving a vehicle with disabled safety systems or leave the vehicle unusable for an indefinite period. I am concerned that a failed instrument cluster can disable important safety systems, including stability control and forward collision mitigation functions, and that replacement parts are unavailable. I am submitting this complaint because this appears to be a potential safety-related defect
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2018 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rearview camera image was distorted on several occasions, and was black on other occasions. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 45,000. VIN tool confirms parts not available.
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
What component or system failed or malfunctioned, and is it available for inspection upon request? Rear view camera and speedometer How was your safety or the safety of others put at risk? Rear view camera restarts and flickers so seeing behind while in reverse is dangerous. The electrical component issues have bled over to the digital speedometer, making it difficult to see the speed at which you are driving. Has the problem been reproduced or confirmed by a dealer or independent service center? Unknown Has the...
Read the full complaint
vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Unknown Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No
The contact owns a 2019 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that the parts were not yet available. The manufacturer was made aware of the issue and provided the contact with a case number. VIN tool confirms parts not available.
The contact owns a 2017 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the camera image was distorted while in use. The failure mileage was unknown. VIN tool confirms parts not available.
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention). The contact stated that while in reverse (R), the back over prevention camera flickered. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 80,000.
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The contact stated that the rearview camera had failed to operate as needed. The manufacturer was made aware of the issue. The approximate failure mileage was 58,000. VIN tool confirms parts not available.
The Lane Departure Warning on both left and right side mirrors sporadically does not work. This is the first time I'm reporting it to NHTSA. but the problem has been going on for at least three months. The LDW lights appear when I turn on the engine, but sporadically do not appear in traffic when there is a vehicle near my left or right side. Sometimes the LDW works fine, and other times, not at all. I never know until I'm in traffic if the LDW will work -- which puts me at risk when changing lanes unless I...
Read the full complaint
physically turn my head to check traffic, which defeats the whole purpose of LDW. The car mechanic who changes my oil every three months did a diagnostic check and could not explain the on-again/off-again LDW lights.
The contact owns a 2018 Mazda CX3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
I have two issues. The front crash warning light goes on and off intermittently even when alone on the highway. This happens about once a month. The second issue is more serious. My car showed 40 miles of gas left in the tank, and ran out of gas. Fortunately I was in the right hand lane and there was a shoulder. Had this happed anyplace else I'd likely be dead. I took my car to the dealer where I bought it. they could not explain the problem and told me to assume it would never happen again (!). I contacted Mazda...
Read the full complaint
directly twice. The first time they took my info and did nothing. The second time they told me to take it to another dealership. I cannot tell that the issue has been reported anywhere so I'm reporting it here. Thank you.
Was driving my grandchildren home when an alarm that I had never heard before started sounding and BRAKE! showed up on the heads up display. The car came to a stop out in the middle of the street even though there was nothing in front of or around the vehicle. It was a good thing there was not a car behind me or they would have rear-ended my vehicle and we or the people in the car that hit us could have gotten seriously hurt. I took the car to the dealer and they did a diagnostics check and said no codes came up so there was nothing wrong with the car. They actually told me that when and if it happens again to videotape it for proof.
Tl* the contact owns a 2018 mazda cx-3. The contact stated while driving 52 mph, the blind spot detection warning indicator was not working. The contact stated that the vehicle was taken to olympia mazda (2201 carriage southwest olympia, wa 98502) where the failure was diagnosed as a blind spot monitoring system failure. The contact stated that the vehicle was repaired under manufacturer communications number: tsb:15-004-18-3539. The contact was upset that the tsb was not a recall. The manufacture was not notified of the failure. The approximate failure mileage was 22,440.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data