Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Wheels & tires

2012 Mazda MAZDA3 Tire problems

Owners have filed 12 complaints about the 2012 Mazda MAZDA3's wheels & tires with NHTSA - 5% of all its complaints, most recently on March 5, 2022. Tire failures, tread separation, wheel bearings, lug nuts, rims and tire pressure monitoring.

Complaints
12
Recalls
0
Crashes
0
Fires
0
Injuries
0
Deaths
0

Tire complaints

SteeringWheels & tiresDriver assistance

I can be turning left from a full stop and a few times almost went up onto the median seperating traffic. The car doesn't keep straight in it's own lane unless i put a lot of pressure with both hands on steering wheel and that doesn't always keep it straight, it veers left and right going down the road. Tire pressure light keeps coming on. when backing up hear like a grinding sound in passenger front tire. I bought this used at a Ford car dealership in June 2021. thats all i can think of right now. This has happened more than once no just one time.

Filed Incident Steering · Wheels · Lane departureNHTSA 11455337
Body, doors & structureWheels & tires

Tl* the contact owns a 2012 mazda 3. The contact stated that the rear camber was set at a negative angle, which made the rear tires wear out. The contact stated that only the inside of the rear tires made contact with the road and the design was set up for racing rather than normal driving. An unknown dealer stated that nothing could be done about the design. The manufacturer was called and the contact was supposed to call them back with the vin. The failure mileage was 15,000. The vin was unknown.

Filed Incident Structure · WheelsNHTSA 11245193
Wheels & tires

Ran car into side fencing put up for construction in regards to dodging debris on i295 from construction work. My tire blew out from having to run into the guard rail and I had to put a donut tire on. I believe this incident is correlated to the construction work going on for months now and that I should be reimbursed a new tire and rim for my 2012 mazda 3/

Filed Incident Tires · WheelsNHTSA 10910762
Body, doors & structureWheels & tiresEngine & cooling

About a year ago, I had to replace my tires at just under 30,000 mi because the treads wore improperly. Fast forward a few months, my axle wore out and had to be replaced. However, the real problem comes when about 3 weeks ago, I was driving at about 75 miles an hour on a major highway, four lanes of traffic, and the engine starts jumping. The rpms go up and down, but the car won't accelerate. I get the car to the side of the road on pure momentum. The car then turns completely off with the key in the on position,...

Read the full complaint

but not lights come on. I remove the key, wait 5 minutes and the car turns back on. It died again a few min later so I have it towed to a mechanic, who can't find anything wrong. 5 Min after leaving the mechanic's shop, my car starts jumping again; I barely made it back. The mechanic is at a loss and recommends the dealership since there are no codes. The dealer gets it and works with it for a few days and says that the mass air flow sensor (mafs) was clogged, which was turning off the car, and the bearings were also causing problems because they were worn out (from the axle being improperly installed). They replaced the bearings, cleaned the mafs, and reset the computer, under the warranty, and told me my car was ok. 2 Days later, I'm driving on a major highway again and the car starts jumping again. I was able to barely make it out of traffic before the car died again. The car starts up again 5 min later and I take about 10 min to get to safety as this repeats. The dealer has my car for almost 3 wks, mazda's field engineers get involved, they-checked the fuel components, the computer, filters etc, and then mazda recommends checking the wiring harness. A clip had broken above the axle on the engine that allowed the wiring to wear out. They had to redo the wiring in a different way so it wouldn't wear--this seems like it has happen to others w/o resolution.

Filed Incident Structure · Wheels · EngineNHTSA 10892307
Wheels & tires

The tires on this car wore out by 30000 miles and they got extremely loud sooner than that. I hit a nail and 2 different tire shops refused to repair the tires because of uneven tread wear. I always take the car in for inspections and maintenance on time. I went to the manufacturers website and found the safety and quality customer ratings on the stock tires are extremely low. I have noticed the car did not have very good traction from the start forcing me to go below the recommended speed limit on turns. ...

Read the full complaint

I called the manufacturer to ask if there is a recall on the tires and they said no, but they did volunteer that those tires were specially ordered for that model car to make it appear to have better fuel economy. The fuel economy dropped a bit once I had safer tires installed. It seems to me that mazda is using cheap unsafe tires to artificially inflate the fuel economy window sticker at the expense of customer safety.

Filed Incident WheelsNHTSA 10874274
Wheels & tires

I purchased this vehicle brand new in july of 2012. In may of this year (2015), I had a tire blow out on me (oem bridgestones) while traveling at 75mph on the freeway. At the time, my car had barely 30,000 miles on it. Of course, they are not warranted. How is it that mazda has a 3 yr./36,000 Mile warranty on their vehicles, but can't manage to equip it with tires that would do the same?!

Filed Incident WheelsNHTSA 10811842
Wheels & tires

Hello, tires have 12,103 miles on them they are exhibiting cracking at the bead where the threads meet the side wall I have told toyo they say this is normal ozone checking who ever heard of that on a 3 year old tire please unbelievable why should I have to die or buy new tires at my own expense when I am out of work at the moment someone please help this is terrible I will include picture of crack tires have all the thread left still that is why I can not understand that these should be recalled also thank you [[redacted]] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr

Filed Incident WheelsNHTSA 10787093
Wheels & tires

Tl* the contact owns a 2012 mazda 3. While driving various speeds, there was a rattling noise underneath the front driver side and the tire pressure light constantly illuminated. The vehicle was taken to a dealer where it was diagnosed that the tires needed to be replaced. The tires were replaced. The manufacturer was not made aware of the failure. The failure mileage was approximately 40,000.

Filed Incident WheelsNHTSA 10767322
SteeringSuspensionWheels & tires

After a mechanics check it was found: 1) slight feathering/edgewear/cupping on all tire's and 2) power steering warning light on ign on however clears on engine start. This is all despite full maintenance history as per mazda guidelines. The problem causes significant tire noise when driving. Although tire thread on the vehicle is at 87%, it was recommended to replace all four tires at time of inspection. Wheel alignment shows the vehicle is within factory guidelines for the vehicle. Possible issue could be flaws in shock/strut manufacturing as the vehicle is well within replacement timeframe for these parts. *Tr

Filed Incident Steering · Suspension · WheelsNHTSA 10677037
Wheels & tires

Took vehicle in for tire rotation. Noticed loud humming noise in front tires after rotation. Took car back to mechanic to look at it. I was told the front tires were cupped but would pose no problem for driving. Gas mileage has gone down 2 mpg since then. *Tr

Filed Incident Tires · WheelsNHTSA 10668227
SuspensionWheels & tires

I had a mechanic rotate my tires and noticed the front tires were making alot of noise. I returned to the mechanic for an inspection and he said that the tires currently on the front that were on the rear have severe cupping probably due to a suspension problem. The mechanic recommended taking the car to the dealer although there is no recall notice for the problem. I had the mechanic rotate the tires back. The tires *tr

Filed Incident Suspension · Tires · WheelsNHTSA 10649362
SuspensionWheels & tires

Premature tire cupping of rear tires. All tires rotated according to mazda maintenance schedule. Result in tire road noise, uneven wear, early replacement. Rear camber setting is possible issue. *Tr

Filed Incident Suspension · Tires · WheelsNHTSA 10648577

Mazda MAZDA3 tire complaints by year

MAZDA3 tire problems, every year

Had a tire problem with your 2012 MAZDA3? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience