- The problem
- Vehicle description: certain mini vans without anti-lock braking systems (abs) fail to comply with the requirements of federal motor vehicle safety standard no. 135, "Passenger car brake systems." Due to inappropriate brake pipe layout, these vehicles do not meet the brake stopping distance with partial failure requirements of the standard.
- The risk
- If partial failure occurred in the braking system, the stopping distance of the vehicle could increase, increasing the risk of a crash.
- The fix
- Dealers will modify the brake system. Owner notification began january 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mazda at 1-800-222-5500, option #4.
Vehicle safety record
2000 Mazda MPV Problems, complaints & recalls
Owners have filed 149 complaints about the 2000 Mazda MPV with NHTSA, most often about the engine & cooling (25) and the body, doors & structure (25). Those complaints describe 12 crashes, 3 fires and 23 injuries. It is covered by 5 recalls, the latest in December 2001 for the hoses, lines / piping, and fittings. For comparison, the 1999 has 2 and the 2001 has 71.
NHTSA data checked
FFar more problems than a typical MPV year, for its age
#67 most complained-about 2000 vehicle
- Complaints
- 149
- Recalls
- 5
- Crashes
- 12
- Fires
- 3
- Injuries
- 23
- Deaths
- 0
Most common 2000 Mazda MPV problems
Share of all 149 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2000 Mazda MPV recalls 5
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Vehicle description: mini vans equipped with original equipment 16 inch tires. These mini vans do not have the correct recommended cold inflation pressure on the label and thus do not comply with section 5.1.2 Of fmvss 120, "tire selection and rims for motor vehicles other than passenger cars."
- The fix
- Owners will be sent accurate tire information labels and owner manual inserts. In addition, owners of mpv's with 16" tires will be advised to check their tire pressure to make sure that the tires are inflated to 35 psi.
- The problem
- Vehicle description: mini vans. These mini vans do not have tire information labels that comply with section 5.3 Of fmvss 120, "tire selection and rims for motor vehicles other than passenger cars."
- The fix
- Owners will be sent accurate tire information labels and owner manual inserts.
- The problem
- Vehicle description: minivans. Due to the inappropriate shape of the linkage in the rear door lock controller, accumulated dust may prevent the door lock mechanism from functioning properly, causing incomplete locking of the door when the childproof locking system is used.
- The risk
- This could result in an opening of the door while driving, increasing the risk of personal injury to a vehicle occupant.
- The fix
- Dealers will install parts in the latching assembly that will prevent this problem from occurring.
- The problem
- Vehicle description: minivans equipped with engines supplied by ford motor company cleveland engine plant. These engines are installed with fuel injectors that do not match the lower intake manifold
- The risk
- THIS CAN RESULT IN A FUEL LEAKAGE.
- The fix
- Dealers will replace the lower intake manifold assembly.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
149 complaints about the 2000 Mazda MPV
Newest first, as filed with NHTSA by owners. Page 6 of 6.
The door label and the tire specification table in the owners manual is incorrectly marked, the tires do not need to be replaced as a result of this recall (dunlop). Nlm
Consumer states having trouble starting vehicle, the vehicle was taken in for inspection and consumer was told that the ignition wires had been gnawed by a rodent and that the repair was not covered under warranty, the vehicle design allows for entry of outside rodents and cause damage to wiring. *Jb
Steering wheel vibrates violently over 50 miles/hr then subsides
DRIVER'S AIRBAG FAILED TO DEPLOY IN CRASH. *AK
Vehicle was involved in a frontal collision at 35 mph. Upon imapct, airbags did not deploy, resulting in injury. Vehicle was totalled. Manufacturer has been notified. *Ak
The camber bolt on the 2000 mazda mpv needs to be adjusted this has caused my driver side tire to wear down unevenly and become flat. This had not happened while driving , but if it we were driving this very well could have caused a blow out. Both mazda & yokohama would not take responsibility for the wear on the tire with only 14,777 miles. *Ak
Windshield is cracked from a point just above the drivers side windshield wiper mount, then following a line along the windshield wiper till the center of the windshield where it then curves down to the bottom of the windshield. Near the bottom center of the windshield is a tiny chip, about the size of a pinprick. Apparantly this is where a small object struck the windshield and caused this large crack. I would think that there must be a defect in the windshield, or the structural design of the vehicle, for such a...
Read the full complaint
large crack to stem from such insignificant physical damage to the surface of the windshield. As the edge of the windscreen is well below the driver's line of sight, some protection for it should have been designed into the vehicle if it is so fragile that any tiny pebble could destroy a windshield. *Ak
Yokohama tires p205/65r15, dot fd9lnhl0300 are faulty, consumer had tires replaced. *Slc
Seat belt buckle in 2nd row is designed so that it is forward of seat crack and cannot move to a completely upright position. This causes major movement/isecure belting of a child convertible booster seat, especially front-to-back movement. This movement occurs even with the tether anchor strap installed. We complained to mazda and wanted the seat belt buckles replaced (to match the redesigned and workable seat belts in the 2001 models) or the entire seat replaced with the 2001 seats. So far, we have had little...
Read the full complaint
success getting any feedback from mazda. Additionally, once we began pursuing this weith mazda, threee different people within the company have informed us that no child seats of any kind are to be used in the 2nd row of the 2000 mpvs. However, they went ahead and installed a tether anchor mounting kit behind the second row (as they have done for many other customers too). Doesn't that imply that you could use child seats in the second row? If you truly cannot install child seats in the 2nd row of the 2000 mpvs, then an entire year's worth of mpvs were sold under false pretenses as most minivan owners have small children and belt their car seats in the second row. Also, the 2000 mpv user manual illustrates putting child seats int he 2nd row -- contradicting what we have been told repeatedly by mazda. We are very concerned that a major vehicle manufacturer can sell minivans which apparently are not designed for safe use of car seats in the 2nd row. Probably many uninformed mpv owners currently have their child seats in the 2nd row. We had hoped that mazda would take a proactive stance on this issue, but what we have mostly heard is, "child seats must be installed in the 3rd row only and cannot be installed in the 2nd row." Please investigate how mazda is able to sell these vehicles without first informing the consumer of this issue, and investigate mazda's unwillingness to investigate fixing this issue.*Ak
Vehicle under normal cargo load vibrates at highway speed (noticeable between 60-70mph). The vibration become apparent when vehicle is under maximum manufacture recommended cargo weight (carrying 6 passengers). At this cargo weight, the vibration worsens and noticeable upon acceleration, low cruise speed, and highway speed.
Vehicle severely pulled to the left and vibrated while driving at 30 or more mph. Vehicle been to dealer's shop on seven occasions, and problem still occurring. Please feel free to provide any further details on this matter. *Ak
The vehicle was not leveled properly, the passengers side was approximately 1 inch or more higher than the driver's side, the dealership said the springs were uneven and refused to fix, finally the dealership approved fixing the vehicle. *Mjs
Car safety seat was strapped in middle row on passenger's side seat. When vehicle was involved in a passenger side collision it caused vehicle to roll, and seat belt, that held car safety seat, unbuckled while vehicle was rolling over.*Ak the two year toddler was injured during the accident. *Yh
THE BRAKES BECAME SQUEEZY, NOISY, AND RUSTY. *SLC
While vehicle was parked for some time without any indication all vehicle's glass shattered. Please provide further information.*Ak
Always have has issues with these tires and fr-480 tires( dot number: 027476 tire size: 22570r15 )
Seat belts lock up when vehicle is moving, they do not release. I believe design defect in that belts are too short. Middle seat moves from left to right. When in the left position, it locks up immediately. Manufacturer says operating normally.
Vibration will occur when driving at speeds of 50 mph, feels like its coming from drivetrain. Dealer cannot determine the cause, nor fix the defect. *Ak *ml
The fixed seat belt anchors prevent safe installation of child and infant car seats. The point where the buckle engages the anchor is too far away from the car seat to properly secure the child seat. The child seat has too much freedom of movement after the seat belt is buckled and tightened.
Since we purchased the vehicle, we have had a problems keeping our 2-year old's car seat secured properly. The seatbelts in the middle seats and rear seat will not tighten and/or loosen after buckling, causing the car seat to shift and move easily. I felt we must be doing something wrong and finally had an opportunity to return it to the dealer. After over and hour and throught the efforts of a service advisor and a lead service technician, it was determined there must be some sort of design flaw in the seatbelt...
Read the full complaint
which prevented the belts from locking properly. They also did not feel that installing a tether would remedy the problem to an appropriate degree of safety. They also called mazda headquarters who informed them that yes, there is a design flaw in the seatbelts but they don't have a resolution at this time and they don't know when they will. The service advisors only recommendation to me is that I find another car seat that might work with these seats. Unfortunately, there are none. Thus, each time my family and I ride in the car, my 2-year old's life is at stake since we cannot safely install a car seat within this vehicle. Please provide me any information you can on seeking remedy to this problem. We will anxiously await your response. *Ak
While at my mazda dealer I was inspecting the new mpv. One of the major features of the new mpv is the drop away rear seat. While trying to see how easy the seat was to fold away, I caught my finger in the seat portion as it folded away. If you combine the small tolerance of where my finger was caught as well as the velocity of the fold away aspect of the seat this inflicted severe pain on my hand. I feel as a consumer this is a design flaw in the vehicle and is a danger to adults as well as a greater danger to children! *Ak
This is of utmost concern for the safety of children in car-seats or booster seats. The seat belt anchors for the 2nd and 3rd row seats are of solid, inflexible construction. This inflexible construction combined with the placement of the anchors does not allow the safe installation of most infant car seats and toddler booster seats. Out of seven infant and booster seats tried, only one has been able to be installed somewhat correctly. The placement and inflexibility of the anchors requires that the lap portion...
Read the full complaint
of the seatbelt be located approximately 7 inches away from the intersection of the seat face and back. This acutally pulls a typical car seat away from the seat back and does not work safely. *Ak
While driving on a rural route came to a stop and was struck from behind by a dodge ram, travelling 60mph which hit the rear hatchdoor and flew open. Neither airbag deployed. Contacted dealer and manufacturer. *Ak
At 30-35 mph /in rainstorm, drove over puddle about 2-3 inches deep, and vehicle on front passenger's side and rear wheel came off the ground , tearing steering wheel out of driver's hand, almost causing loss of control. *Ak
Mazda MPV: every year compared
| Year | Complaints | Recalls | Grade |
|---|---|---|---|
| 2004 | 96 | 5 | D |
| 2003 | 114 | 4 | F |
| 2002 | 125 | 4 | F |
| 2001 | 71 | 3 | D |
| 2000 | 149 | 5 | F |
| 1999 | 2 | 0 | A |
| 1998 | 19 | 1 | B |
| 1997 | 24 | 1 | C |
| 1996 | 21 | 1 | A |
2000 Mazda MPV vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2000 Mazda MPV | 149 | 5 | F | |
| 2000 Mazda 626 | 217 | 2 | F | Compare |
| 2000 Mazda Protege | 102 | 3 | F | Compare |
| 2000 Mazda B-Series | 58 | 0 | D | Compare |
| 2000 Mazda MX-5 Miata | 29 | 0 | D | Compare |
| 2000 Mazda Millenia | 19 | 0 | B | Compare |
| 2000 Mazda Tribute | 5 | 0 | A | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2000 Mazda MPV
Does the 2000 Mazda MPV have any recalls?
Yes - NHTSA lists 5 recalls for the 2000 Mazda MPV: hoses, lines / piping, and fittings (December 2001); labels (April 2000); labels (April 2000); latch (July 1999) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2000 Mazda MPV?
By the complaints owners filed with NHTSA, the most common problem areas are the engine & cooling (25), body, doors & structure (25), wheels & tires (19).
How many complaints has the 2000 Mazda MPV had?
149 complaints have been filed with NHTSA, the first on September 9, 1999 and the latest on February 4, 2021. Of these, 12 describe a crash and 3 a fire, and together they report 23 injuries and 0 deaths.
Is the 2000 Mazda MPV a reliable vehicle?
Its Safety Index is 16 out of 100 (grade F: far more problems than a typical Mazda MPV year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Mazda MPV years have the most complaints?
2000 (149), 2002 (125), 2003 (114). See every Mazda MPV year compared.
What should I do if my 2000 Mazda MPV has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data