- The problem
- Bosch Brake Components LLC (Bosch) is recalling certain aftermarket replacement front brake pads, models Bosch QuietCast BC598 and BP765, Bosch Blue BE598 and BE598H, Prostop PD598 and PD765M, Duralast Gold DG598, Duralast MKD598, Stop Master ST598, UltraStop ULT598, UltraLife MX598 and MX765, BrakeBest MKD765, and Prostop Platinum PGD598. These brake pads, manufactured October 1, 2014, to October 31, 2015 are intended for use on 2001-2007 Ford Taurus, 2001-2005 Mercury Sable, 1995-1999 Ford Taurus SHO, 1995-2002 Lincoln Continental, and 1993-1998 Lincoln Mark VIII vehicles. The brake pad shim may shift out of position causing the shim to contact the brake disc resulting in damage to the disc.
- The risk
- A damaged or broken brake disc may reduce a vehicle's braking power, increasing the risk of a crash.
- The fix
- Bosch will instruct the owners how to have the affected brake pads replaced, free of charge. The recall began on May 26, 2016. Owners may contact Bosch customer service at 1-888-715-3616.
Brakes
2003 Mercury Sable Brake problems
Owners have filed 14 complaints about the 2003 Mercury Sable's brakes with NHTSA - 7% of all its complaints, most recently on July 19, 2016. They describe 2 crashes, 0 fires and 0 injuries. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.
- Complaints
- 14
- Recalls
- 1
- Crashes
- 2
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Brake recalls for the 2003 Mercury Sable
Brake complaints
I own a 2003 mercury sable, I replaced the brakes , and an assortment of problems followed. First they began locking , then the car would not stop at all. I replaced pads.Rotors.Tires ,bleed the breaks all in an effort to find the problem. I could not, so the car has been sitting about a year. Then I received the recall on the breaks , now everything makes sense.
My car is trying to kill me! I was driving at approximately 40 mph, when I started to brake for a stop before turning . The car slowed down, as I held my foot on the brake, but suddenly the car started to accelerate. I already had my foot on the brake, and the brake held, but I had to take the car out of gear, and shut the engine off. The engine was racing at a speed I would estimate at 80 mph. It was a frightening and dangerous experience. I checked to see if a floor mat was pressing on the gas pedal. It was not. The same incident happened on two more occasions. My mechanic has not found the problem. I no longer drive the car. *Tr
I was driving my car and while I was braking for a stop light I couldn't stop. Something was giving my car gas as I was trying to stop. Ever since then when I drive it my rpm's are high and makes a noise. I called the shop and had my idle air control valve replaced because that's what the automotive place said was wrong. Since then it's been in 3 other times and had the part replaced just in case it was a faulty part. Now the mechanics are baffled as am i. I did research and noticed this was a common complaint on...
Read the full complaint
these vehicles. I just took it in again today december 6,2012 and we can't figure out the problem. It's getting worse to where I can't really drive it because when I go to brake it won't stop. I can be at a complete stop and not touch the gas and my car will get up to 45mph without me even touching the gas pedal. *Tr
I went to leave from a local park on a saturday evening, but my vehicle would not move out of park. I had to call a tow truck. The tow truck driver showed me a trick how to get the vehicle to start, by turning the ignition key ever so slightly and then trying to move the shifter to neutral. Once in neutral I started the vehicle and drove home. After driving the vehicle for almost a week by starting in neutral, I was stopped on the following friday by police. I was informed that I didn't have any working...
Read the full complaint
brake lights. I drove home and looked on the internet if there were any recalls on this vehicle. Well, there was a recall done in 2004 (nhtsa action number: rq03008), but I was informed by ford motor company that my vehicle based on its vin was not apart of the recall. I requested to speak to a supervisor and was instructed that someone would contact me on that following monday. I was indeed contacted by ford motor company and informed again, that based on my vin, that I did not qualify as a part of the recall. I was told if more complaints were made, then something could possibly be done. I told the ford representative that I was not interested in having my vehicle repaired as I had the repair done based on the recall information for approximately $50. The issue was exactly as it was described on the nhtsa's website, motortrend and ford motor company's. The repair took approximately 15 minutes and then I was able to start the vehicle in park and the brake lights were functioning. My concern is that for almost a week I drove with no brake lights in a vehicle where I drive around with my wife, a toddler, and an infant and at any point I could have been rear ended because of this defect in the vehicle. The vehicle is 10 years old, it will never have enough complaints. However, it does not diminish the potential for loss of life from this detect. *Tr
Tl*the contact owns a 2003 mercury sable. While attempting to depress the brake pedal and place the vehicle into drive, the contact's foot struck the accelerator pedal instead. The vehicle accelerated forward at a fast pace. The contact feels that the accelerator and brake pedals are too close together and could cause a crash when pressed incorrectly. He called the manufacturer and was advised to have the vehicle inspected. While driving 25 mph, the contact had to slam on the brakes in order to avoid a crash. ...
Read the full complaint
He noticed that the steering column failed intermittently, but was able to drive the vehicle safely to his destination. The vehicle was taken to a local repair shop and inspected by a technician, who stated that he does not work on steering failures. The contact was instructed to take the vehicle to a dealer. The vehicle has not yet been inspected and no repairs have been performed. The contact is in the process of notifying the manufacturer. The failure mileage was 10,000 and current mileage was 57,063.
Customer is asking for info about a customer complaint**cc the consumer has a similar situation and would like to find out more information. *Tr
Abs activated after going over several "bumps" in a series and brakes applied lightly. Lightly being as when slowing down in traffic for a traffic light and stopping. Abs light did not come on. However, abs light has subsequently come on. Abs light does not necessarily come on again the next time the vehicle is started. Also the brakes can appear to be fine until the next series of "bumps" is encountered when driving. *Nm
When stopping on an incline for a light or sign with foot on brakes vehicle rolled backwards when foot was taken off the brakes to accelerate. Would either depress the brakes again or accelerator pedal to keep vehicle from hitting another vehicle behind. Had taken vehicle to dealerships but mechanic did not notice or find anything wrong. This problem happened at least 6 times before.*Ak
While driving in high speeds consumer heard a loud clanking noise coming from the front. Consumer applied the brakes, and the vehicle failed to stop completely. Vehicle was taken to the dealer for inspection. *Ak there was a gas smell inside of the vehicle, a steering vibration and the oil pan gasket was replaced. *Jb
Consumer was concerned that brake pedal went to the floor intermittently when applied. Vehicle was to dealer on several occasions, and dealer was unable to locate the problem. Afterwards vehicle was involved in a crash because the brake pedal went to the floor while coming onto oncoming traffic. No injuries were reported. Vehicle was taken to the dealer, whoinformed the consumer that the problem was the master cylinder. *Ak
Dealer indicated that parts won't be available for 4 to 6 weeks. Lincoln mercury, 24400 center ridge, westlake oh, 440-835-3700. *Ak
Problems with braking system on 2003 mercury sable station wagon.*Mr (nar) *cb
There is a problem with the distance between the brake and accelerator pedals, causing driver to unintentionally press the accelerator pedal when trying to brake. *Ak
The accelerator and brake pedal were too close together and caused the consumer to inadvertently depress the gas pedal. *Nlm *scc *jb
Mercury Sable brake complaints by year
Sable brake problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data