Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Engine & cooling

Porsche 911 GT3 Engine problems by year

8 complaints filed with NHTSA about the Porsche 911 GT3's engine & cooling. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.

Engine complaints by model year

YearEngine complaintsCrashesInjuriesRecalls
20153000
20140001
20112000
20103000

Engine recalls

Latest 911 GT3 engine complaints

2015 Porsche 911 GT3Electrical systemAcceleration & cruise controlEngine & cooling

The pcm unit which controls the cars computers keeps shutting on and off saying do not drive. Get service ..... This has happened on many cars and there was a class action suit regarding a recall. It is now closed and I was never notified.

Filed Incident Electrical system · Vehicle speed control · EngineNHTSA 11622211
2010 Porsche 911 GT3Engine & cooling

Last year my 2010 Porsche 911 GT3RS experienced a catastrophic engine failure while on the road. I had to shut off the car in the middle of a 4-lane highway and try to coast to a stop while navigating around much faster traffic risking my safety and the safety of other drivers. There was no warning prior to the failure. Just a sudden bang, followed by shaking and rattling noise. Once the car was towed to an automotive repair shop, the engine was taken apart and it was concluded that a piece from the intake...

Read the full complaint

broke off and got swallowed by the engine while on the road. I have images and documentation of the damage and the parts are available for inspection. The trouble is that the failed piece of the intake was part of a manufacturer recall to fix that exact issue back in 2013. After the findings of the repair shop I contacted Porsche Cars North America. The car was subsequently brought in to a Porsche dealer for inspection, where I was told multiple times that a failed recalled part would be covered by the manufacturer's good will repair policy. After 4 months of back and forth with the headquarters I was told that Porsche would not be responsible. I have spoken to other owners of this exact model cars and several of them have confirmed that their replacement intakes have failed, in some cases causing the engine to completely seize while on the road. Thankfully that did not happen to me.

Filed Incident EngineNHTSA 11501532
2015 Porsche 911 GT3Electrical systemEngine & coolingFire

In may 2019 I purchased a certified pre-owned 2015 porsche carrera gts and had it for 11 months before it caught on fire while driving it. A forensic investigation revealed that the cause of the fire was the electrical board located on the inside of the cabin near the right rear tire. On the day of the incident, after driving the car less than 15 miles from my home to a nearby property I noticed the car was smoking as I pulled into the driveway. I parked the vehicle and found that there was a small fire in the...

Read the full complaint

engine compartment. I couldn't get to the car in time with a fire extinguisher and by the time the fire department arrived, the car was engulfed in flames. I'm now faced with a total loss for the vehicle and not to mention reluctance to ever purchase another porsche in my life. I've dreamt about owning this porsche carrera (gts) since I was a child and this experience has totally altered my perception. If my family had been in the car with me, this could have turned out disastrous and for that my confidence has been shattered with porsche. I am also left searching for a car that is close to as nice as the car I had (fully spec'd and decked out carrera gts) which I've had no luck doing within the price point I can afford given the insurance pay out.

Filed Incident Electrical system · EngineNHTSA 11322421
2015 Porsche 911 GT3Engine & cooling

Tl* the contact owns a 2015 porsche 911 carrera. Several times, while driving, the check oil level warning indicator illuminated. When the contact filled the vehicle with fuel, he also had to add oil to the engine. The contact stated that he had to add oil approximately every 500-900 miles. The vehicle was taken to the collection (200 bird rd, coral gables, fl 33146 (305) 444-5555) where a failure could not be diagnosed. The contact was advised that this was a normal issue for this vehicle. The manufacturer was...

Read the full complaint

made aware of the failure, but no assistance was offered. The failure mileage was approximately 10,000. *Ln consumer dated this is a malfunction as well as a safety issue the excessive oil consumption each 500-700 miles 400 have to add oil stop the car or the engine can freeze up on you. Updated 7/24/18*jb *tr

Filed Incident EngineNHTSA 11031568
2011 Porsche 911 GT3Engine & cooling

The car developed a coolant leak that was discovered when I stopped the car and noticed fluid leaking under the drivers side rear tire. The car was taken in to porsche and there was a failed coolant line. *Tr

Filed Incident Engine and engine coolingNHTSA 10522981
2010 Porsche 911 GT3Engine & cooling

I had the 8 coolant fittings, prone to epoxy failures, secured to housings by welding. Cost for welding was $275. *Tr

Filed Incident EngineNHTSA 10520819
2011 Porsche 911 GT3Engine & cooling

Due to well-documented issues with glued coolant tubes failing and resultant loss of coolant over rear tires which would almost certainly make control of the vehicle impossible in the "gt1"-engine porsche models, I had the coolant tubes welded to the coolant manifold of the engine at my expense at my local porsche dealer to prevent the failure from occurring. I strongly feel that this known failure mode should be covered by a nhtsa recall and the cost of the repair should be borne by porsche. [[redacted]] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr

Filed Incident EngineNHTSA 10510147
2010 Porsche 911 GT3Engine & cooling

Coolant lines / fittings welded/ pinned - mk2 mezger engine has a faulty design of coolant hoses/lines. Upon research online, I am not the only person affected but all turbo/gt3/rs/gt2 cars from 2004-current I have also come across cars with less than 10k miles that had this problem so my problem is not isolated. There has been incidence on highway where these hoses just burst or loses fitting and spills coolant contents all over the road. This also cause car to spin out since lost in pressure and traction....

Read the full complaint

Very dangerous. Porsche dealer will only use different glue to fit them. Proper way is not use rubber hose but to use metal pipes and weld them so these coolant lines do not ever fall out. This could have caused catastrophic injury in public road. Porsche denies any faulty or sub-standard material that was used in a critical component of high performance engine. In order for me to fix this, I have to pay my porsche mechanic to remove the engine, find the coolant lines, replace all of the hoses with metal pipe lines, weld them, then put it back in the engine bay. I feel that I should have to pay for this out of pocket for safety of myself or others in public road. Porsche suggested that they will use the same rubber hoses with just a better adhesive glue to hold them. They will fail within time. This is a temporary fix they are offering. It is for safety of the motorist. *Tr

Filed Incident EngineNHTSA 10509031

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience