Porsche Cars North America, Inc. (Porsche) is recalling certain 2024 718 Cayman GT4 RS, 911 Turbo S, 911 Turbo, 911 S/T, 911 GT3 RS, 911 GT3, 911 Carrera GTS, and 718 Spyder RS vehicles. The center lock wheel bolt may fracture and cause the wheel to detach.
2010-2024 · 10 model years
Porsche 911 GT3 Problems by year
Owners have filed 18 complaints about the Porsche 911 GT3 across 10 model years, and it has 8 recalls. The 2010 has the most complaints once its age is allowed for (4). The most reported problem area is the engine & cooling, followed by the electrical system.
- Complaints
- 18
- Recalls
- 8
- Crashes
- 1
- Fires
- 2
- Injuries
- 0
- Deaths
- 0
911 GT3 complaints by model year
Highlighted: the year with the most complaints for its age. Older vehicles have had more time to collect complaints - the Safety Index grade allows for that.
Most common 911 GT3 problems
Porsche 911 GT3 recalls 8
Porsche Cars North America, Inc. (Porsche) is recalling certain 2021-2023 911 Turbo S, 2022 911 Turbo, 2022-2023 911 GT3 Touring, 911 GT3, 911 Carrera 4 GTS, 2022-2024 911 Carrera GTS, 2023 911 GT3 RS, 911 Dakar, and 2024 911 Carrera T vehicles equipped with...
Porsche Cars North America, Inc. (Porsche) is recalling certain 2022-2023 911 GT3 Touring vehicles. A software error in the rear spoiler control unit may allow both the vehicle and spoiler center high-mounted brake lights to activate simultaneously when the...
Porsche Cars North America, Inc. (Porsche) is recalling certain 2022 911 GT3 vehicles. The screw that attaches the lower seat belt anchor to the seat frame may not have been tightened properly.
Porsche Cars North America, Inc. (Porsche) is recalling certain 2014 Cayman and Cayman S, 2014-2016 911 GT3, 2016 911 GT3 RS and 911 R, 2018 911 GT3 and 911 GT2 RS and 2019 911 GT3 RS, 911 GT3, and 911 GT2 RS vehicles. The Child Restraint System (CRS)...
Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2014 911 GT3 vehicles manufactured October 19, 2013, through January 16, 2014. In the affected vehicles, a piston connecting rod may come loose and damage the engine crankcase.
Porsche is recalling certain model year 2010 911 GT3 vehicles manufactured May 15, 2009, through February 11, 2010. The rear wheel hubs may be prone to failure under certain driving conditions. Also, the original, suggested maintenance intervals may be...
Porsche is recalling certain model year 2010-2011, 911 turbo; turbo s, 911 gt3, gt3 rs and gt2 rs high performance vehicles, manufactured from may 18, 2009 through september 17, 2010, and equipped with center locking hub and wheel assemblies. Over time the...
Latest 911 GT3 complaints
The pcm unit which controls the cars computers keeps shutting on and off saying do not drive. Get service ..... This has happened on many cars and there was a class action suit regarding a recall. It is now closed and I was never notified.
There is an active spoiler that has a brake light built into it. There is a design issue with the wiring for the light in the spoiler. The brake light harness is worn out by the movement of the spoiler causing failure of the brake light. This meams there is no 3rd brake light when the spoiler is automatically activated.
The contact owns a 2018 Porsche 911 GT3. The contact stated that while reversing, the back over prevention system failed to display a rear-view image. After a visual inspection of the rear of the vehicle, the contact became aware that the reverse lights also failed to illuminate. No warning lights were illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the transmission reverse switch. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 26,000.
This car has popular aftermarket Spiegler brake lines on it, braided stainless lines, these are the brakes and lines: https://www.essexparts.com/ap-racing-by-essex-road-brake-kit-front-9562380mm-porsche-911 Yesterday, on startup with the brake pedal depressed, the front right line burst. See uploaded pictures. The lines have been on the car since April 2021, and the car is regularly service and gets annual or more frequent brake flushes. Inspection at the shop this morning revealed multiple areas of...
Read the full complaint
discoloration underneath the plastic sheath that is over the braided line. One of the other lines on the front left was bulging in the area of the discoloration, suggesting that one was close to failure as well. There are no signs of abrasion on the lines themselves, it appears the stainless braided line that encases the teflon inner line is corroding or degrading for some reason. I have contact Essex, the distributor of this kit. The car is at Cantrell Motorsports in Bellevue, Washington and has not been disassembled yet, I would authorize the NHTSA to inspect and take custody of the brake lines if you wish.
Last year my 2010 Porsche 911 GT3RS experienced a catastrophic engine failure while on the road. I had to shut off the car in the middle of a 4-lane highway and try to coast to a stop while navigating around much faster traffic risking my safety and the safety of other drivers. There was no warning prior to the failure. Just a sudden bang, followed by shaking and rattling noise. Once the car was towed to an automotive repair shop, the engine was taken apart and it was concluded that a piece from the intake...
Read the full complaint
broke off and got swallowed by the engine while on the road. I have images and documentation of the damage and the parts are available for inspection. The trouble is that the failed piece of the intake was part of a manufacturer recall to fix that exact issue back in 2013. After the findings of the repair shop I contacted Porsche Cars North America. The car was subsequently brought in to a Porsche dealer for inspection, where I was told multiple times that a failed recalled part would be covered by the manufacturer's good will repair policy. After 4 months of back and forth with the headquarters I was told that Porsche would not be responsible. I have spoken to other owners of this exact model cars and several of them have confirmed that their replacement intakes have failed, in some cases causing the engine to completely seize while on the road. Thankfully that did not happen to me.
Spoiler lift spring brackets on both sides are broken allowing the springs to get in the way of the normal performance of the spoiler. This could impede the deployment of the spoiler or the successful retraction of the spoiler, creating a reduction in downforce (grip) or creating a safety hazard of a non-fully retracted spoiler. This was identified by a third-party repair shop during maintenance work. In doing further research online I have determined that this is an extremely common issue on this model generation (991.1) that Porsche will not address.
Questions about the Porsche 911 GT3
Which Porsche 911 GT3 years have the most problems?
Which Porsche 911 GT3 years have the fewest complaints?
What are the most common Porsche 911 GT3 problems?
Across every model year, owners report problems with the engine & cooling (8), electrical system (5), transmission & drivetrain (2) most often.
How many recalls does the Porsche 911 GT3 have?
NHTSA lists 8 recalls across all Porsche 911 GT3 model years. Each year's page lists the recalls for that year; check your own vehicle by VIN at nhtsa.gov/recalls to see whether the repair has been done.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data