- The problem
- A part of the steering column upper universal joint cracked during the manufacturing process.
- The risk
- This condition could result in noise and free play in the steering system and if left uncorrected, will result in loss of steering control.
- The fix
- Dealers will inspect the universal joint for cracks and will replace cracked joints with new parts.
Vehicle safety record
1992 Porsche 911 Problems, complaints & recalls
Owners have filed 2 complaints about the 1992 Porsche 911 with NHTSA, most often about the brakes (1) and the body, doors & structure (1). Those complaints describe 1 crash and 1 injury. It is covered by 4 recalls, the latest in August 1996 for the steering wheel / handle bar. For comparison, the 1991 has 1 and the 1993 has 0.
NHTSA data checked
DMore problems than a typical 911 year, for its age
#214 most complained-about 1992 vehicle
- Complaints
- 2
- Recalls
- 4
- Crashes
- 1
- Fires
- 0
- Injuries
- 1
- Deaths
- 0
Most common 1992 Porsche 911 problems
Share of all 2 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
1992 Porsche 911 recalls 4
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- The hydraulic brake pressure reduction valve causes the rate of hydraulic pressure reduction to slow down, which may result in the rear wheels locking-up even with the anti-lock brake system in operation.
- The risk
- Rear wheel lock-up may result in loss of vehiclecontrol and an accident.
- The fix
- Porsche dealers will install a modified hydraulic brake pressure reduction valve.
- The problem
- After the engine has been turned off, the rear heater will automatically operate in order to dissipate heat in the engine heating system. During this operation, the resistor for the rear heater blower can become overloaded due to a binding or seized rear heater blower.
- The risk
- The overloaded resistor can create heat sufficient toignite the plastic air pipe to which it is connected, resulting in an enginecompartment fire.
- The fix
- Porsche dealers will install a new resistor containing a circuit breaker.
- The problem
- The ball sockets on the cruise control linkage can break, allowing the cruise control linkage to become detached on one end and jam on nearby components, which could impair throttle plate operation.
- The risk
- Impaired throttle plate operation could prevent theengine from returning to idle, resulting in unwanted engine speed and possiblevehicle accident.
- The fix
- Replace the current plastic ball sockets with a new linkage using steel ball sockets, and lubricate the cruise control relay lever. Owners are advised not to use the cruise control until the modification is installed.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
2 complaints about the 1992 Porsche 911
Newest first, as filed with NHTSA by owners.
There is no way to file this complain without mentioning the company who is responsible for the safety of so many lives. Singer vehicle group also known as (svg) is re-manufacturing these vintage classic porsche 911 from '89-'94 by disassembling them from nut to bolt and reassembling them to new svg specs with a modified engine and transmission. These cars are reassembled with a 500 hp engine and a ticket value price of over a million dollars, and yet one equipment that is very vital to every motor vehicle the...
Read the full complaint
brake master cylinder is the only used part on the vehicle. The brake master cylinder on every singer vehicles is a rebuilt used master brake cylinder. Again this is a new reassembled vehicle from top to bottom except for the brake master cylinder. There is a new master cylinder for these specific vehicles, where a company has manufactured to oem specifications and svg is aware of the availability and refuses to offer their customers or is concerned about safety. Svg has an internal management issue as its apparent on glassdoor.Com, where past engineers and employees who have worked at svg have expressed their feelings online. Upper management does not have a clear understanding of the production line. Svg should have all of their productions of their cars halted due to safety concerns where past customers who have purchased these vehicles are still complaining about the braking issues that have gone to the dealer (svg), thier corporate location is still using a used master brake cylinder. Svg website does not list the items used to make up the revised car, we believe they should state that svg uses a used rebuilt brake master cylinder on their one million dollar/500hp cars. We have attached the new brake master cylinder image and the part number is 964-355-015-03, this is the new brake master cylinder which is readily available.
The vehicle had struck a slope and rolled over. Related to it's center gravity, the vehicle crashed on the driver's side of the frame which held the windshield. The compressive forces pushed down the driver's side of the windshield frame and damaged the a pillar. *Scc *jb
Porsche 911: every year compared
All 911 years1992 Porsche 911 vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 1992 Porsche 911 | 2 | 4 | D | |
| 1992 Acura NSX | 2 | 0 | C | Compare |
| 1992 Chevrolet Corvette | 0 | 2 | B | Compare |
| 1992 Porsche Carrera | 1 | 2 | D | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 1992 Porsche 911
Does the 1992 Porsche 911 have any recalls?
Yes - NHTSA lists 4 recalls for the 1992 Porsche 911: steering wheel / handle bar (August 1996); hoses, lines / piping, and fittings (December 1993); fuses and circuit breakers (December 1993); vehicle speed control (October 1992). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 1992 Porsche 911?
By the complaints owners filed with NHTSA, the most common problem areas are the brakes (1), body, doors & structure (1).
How many complaints has the 1992 Porsche 911 had?
2 complaints have been filed with NHTSA, the first on February 19, 2003 and the latest on July 8, 2019. Of these, 1 describe a crash and 0 a fire, and together they report 1 injury and 0 deaths.
Is the 1992 Porsche 911 a reliable vehicle?
Its Safety Index is 29 out of 100 (grade D: more problems than a typical Porsche 911 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Porsche 911 years have the most complaints?
2007 (50), 1995 (12), 1999 (8). See every Porsche 911 year compared.
What should I do if my 1992 Porsche 911 has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data