- The problem
- Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
- The risk
- Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
- The fix
- Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Transmission & drivetrain
2011 Ram 1500 Transmission problems
Owners have filed 176 complaints about the 2011 Ram 1500's transmission & drivetrain with NHTSA - 26% of all its complaints, most recently on September 18, 2026. They describe 5 crashes, 1 fire and 2 injuries. Harsh or delayed shifting, slipping, CVT shudder, rollaway, axles, driveshafts and transfer cases.
- Complaints
- 176
- Recalls
- 2
- Crashes
- 5
- Fires
- 1
- Injuries
- 2
- Deaths
- 0
Transmission recalls for the 2011 Ram 1500
- The problem
- Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange.
- The risk
- If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
- The fix
- On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.
Transmission complaints
The contact owns a 2011 Dodge Ram 1500. The contact stated that while driving at an undisclosed speed, there was an abnormal whining sound coming from the vehicle. The contact pulled the vehicle over to the side of the road, and there was a loud popping and breaking sound coming from underneath the vehicle, causing the rear wheels to lock up. Upon inspecting the vehicle, the contact discovered that the rear driveshaft had fractured and detached from the vehicle. The vehicle was towed to an authorized dealer, who...
Read the full complaint
diagnosed the failure and recommended the installation of a new driveshaft, rear differential assembly, and failed pinion gear. The contact referenced NHTSA Campaign Number: 13V038000 (Power Train); as a possible cause for the failure; however, the dealer informed the contact that the VIN was not included in the recall. The failure mileage was 250,000.
The contact owns a 2011 Dodge Ram 1500. The contact stated that while the vehicle was being serviced by an independent mechanic, the contact was informed that the motor mounts were old and fractured. The independent mechanic suggested that the vehicle was taken to the dealer for the repair. The vehicle was taken to the dealer, who confirmed that the motor mounts were fractured and that the vehicle backfired due to piston failure. The dealer replaced the motor mounts. The contact stated that the motor mounts were...
Read the full complaint
replaced under an unknown recall. The contact stated that on a separate occasion, the vehicle was at a specialty shop for the engine to be replaced. While at the specialty shop, the contact was informed that the motor mounts were not replaced. The vehicle remained at the specialty shop unrepaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 134,000.
The contact owns a 2011 Dodge Ram 1500. The contact stated that while driving at approximately 45 MPH, an abnormal clunk was heard coming from under the vehicle before the rear end of the drive shaft disconnected. No warning lights illuminated. The contact stated that he lost control and the vehicle had jumped the curb into a ditch before coming to a stop on a culvert. The air bags did not deploy. The contact sustained minor injuries to his neck however, no medical attention was sought. A police report was not...
Read the full complaint
filed. The vehicle was towed and parked at the contact's home address, where it remains until further investigation. The local dealer was contacted. The vehicle was not diagnosed or repaired. In addition, the contact related to the failure to NHTSA Campaign Number: 14V796000 (Power Train) however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 120,000.
The gas tank fell onto the road while driving to pick up my daughter from the bus. I immediately pulled over due to the sound. I then saw the front of the gas tank on the ground , half a mile down the road I was traveling there are alot of pit holes and that could of ended in a fire or worse with my tank dragging the ground. I have taken it to the dealership that would help repair the recall but they have yet to repair or give me information about what the manufacturer has said on what to do. They told me it is to...
Read the full complaint
rusty underneath to repair and contacted manufacturer. I am without a vehicle its been almost 2 weeks and I have a 6 year old child and my own health issues that inquire dr appointments. I have no money for a rental and no family or friends who can help with rides. I am unsure of what to do next I just know this is extremely frustrating considering I had purchased this vehicle only a few months ago.
The contact owns a 2011 Ram1500. The contact received notification of NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline) and 17V821000 (Power Train) however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The contact stated that the dealer had confirmed that parts were ordered; however, when the vehicle was brought into the dealer for the recall repair, the contact was...
Read the full complaint
informed that parts had not been ordered. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available. Parts distribution disconnect.
The contact owns a 2011 Ram 1500. The contact stated that while driving at approximately 35 MPH, the rear pinion nut detached. The contact stated that the rear end of the vehicle was seized. The vehicle was towed to the residence. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted and informed the contact that the repair was not covered under a recall. The failure mileage was approximately 195,000.
The contact owns a 2011 Ram 1500. The contact stated that on various occasions after turning off the vehicle and removing the key from the ignition, the gear shifter inadvertently shifted from the park(P) to neutral(N). No warning lights were illuminated. The vehicle was taken to a local dealer to be serviced under NHTSA Campaign Number: 17V821000 (Power Train). The vehicle was repaired; however, the failure persisted. The manufacturer was made aware of the failure. The approximate failure mileage was 41,000.
The contact owns a 2011 Ram 1500. The contact stated that on numerous occasions while her husband was driving at various speeds, the vehicle stalled without warning. The contact stated that the vehicle was able to be restarted. No warning lights were illuminated. The vehicle was taken to an independent mechanic however, the failure could not be duplicated. The dealer was not notified of the failure. The vehicle was not repaired. The manufacture was notified of the failure, but no assistance was provided. The failure mileage was approximately 120,000.
The timing chain and timing tensioner are loose when the economy is on. Have to drive it in tow mode for it to stop. Then the truck jumped forward an hit another vehicle. Now, I have to pay 1600 to get it fixed.. If dodge would've put good quality parts in we wouldn't be having this discussion.
When the truck is loaded to approximately 75% - 100% GVWR and nose up on a moderate to steep incline upon releasing the brake and not depressing the accelerator immediately permitting the truck to roll back even slightly the engine will stall . Upon engine stall brake power assist is lost and brake pedal becomes very difficult to depress and is extremely difficult arrest the motion of the truck. This truck in question is equipped with a Cummins diesel engine & Asin automatic transmission.
This is additional information for NHTSA tracking number 11476438. Through an online search, this issue seems to pertain to not only our vehicle class, but others equipped a HEMI engine. As this happened to me, it is very dangerous. A rapid deceleration on a highway, at highway speeds is dangerous. As the vehicle is decelerating on its own, brakes are not employed. Thus, no brake lights to warn others of the deceleration. Luckily, I had an attentive driver behind me. Should I have been trapped in the the...
Read the full complaint
inside lane, I cold have been over-run by a truck or worse cause a chain reaction of rear-ends potentially injuring many. Upon contacting Chrysler today, they didn't seem to have any concerns as it was beyond the warranty period. They seem to be completely absolving themselves of any accountability if the vehicle is beyond its warranty period. They appear to not be concerned of the safety of others once the warranty expires. Concerning our vehicle, all maintenance has been timely and supporting documentation is available.
My car had suddenly and without any warning broken down in the middle of the street, putting me and 2 other passengers at extremely high risk considering we were in a busy highway, which left us stuck in the car until we managed to run for safety to the side of the road. My Vehicle is a Doge Ram 2011 5.7 Liter V8 with 80K mileage. VIN# [[redacted]] The crash was caused by the Driveshaft completely separating and dragging on the asphalt, while the rear axle seized and resulted in a loss of power, and the rear...
Read the full complaint
differential to leak all the fluid. At first, I sent the car via a tow truck to an independent service center, which has been providing all the needed maintenance to my car for the past 5 years. In the process of trying to fix the vehicle and inspecting the issues which apparently turned out to be really expensive to fix ( Rear Differential $1400 used ). We discovered that there's a recall conducted on the vehicle from the manufacturer, that I didn't have any prior knowledge to related to this malfunction. Then I immediately took the vehicle to the nearby dealership, who acknowledged the recall at first only, but before conducting the repair they changed their minds and stated that I should've brought the car and fixed the undersized pinion shaft splines only and avoided the whole crash! Obviously I would've done that if I knew. To conclude: The vehicle crashed due to a safety issue that shouldn't be blamed on the customer. and the dealership (Advanced Automotive Trading Co) is refusing to address the exact detailed issue which they addressed in the recall description. and wouldn't take responsibility. PS: I'm an American living in Jordan, and I couldn't find anyone to really report my problem to here, that's why I'm submitting a complaint to NHTSA. Thank you, [[redacted]] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
I have read there is a rear differential recall and it is not listed on the recall list. I am worried my carrier bearing will fail possible causing severe damage possibly death.
In January 2021 I had to replace the driver's side caliper and CV axle, due to caliper malfunction. In February 2022 I had the same problem and had to replace the CV axle and caliper again due to caliper malfunctioning a second time.
Engine code reading misfire on cylinder 3 while driving down the interstate. Vehicle has less than 80k miles. Vehicle starts to shake and is harder to control, and loses acceleration, is random, almost causing a multi-car pileup. Issue is the camshaft and lifters. It is descibed in this communication https://static.Nhtsa.Gov/odi/tsbs/2021/mc-10187058-9999.Pdf this is apparently a known issue with anything with a 5.7, 6.0 Or 6.4 Hemi motor. Spark plugs and plug wires were replaced 3/21/21, driven again on 3/22/21, same issue, almost causing another crash due to loss of power on the interstate when merging, and then shaking almost sending the vehicle into bridge.
Ram 1500 4wd has 79000 on vehicle not used to tow and all maintenance (fluids,filters ,etc) performed as scheduled. Transmission flashed a manual shift code of "4" and went into limp mode while driving on interstate in clarksville tennessee stopped by autozone and hooked up to computer said "a shift solenoid bad. Called dealer out of warranty so I took to mr transmission and had to have a complete overhaul on transmission. Couldnt rebuild because of the metal savings in transmission. This is unexceptable due to the usage of the vehicle
The electrical wiring has shorted out the headlights on the driver side and melts all wiring in the area. This is a huge issue with ram in the 2011 years. The other issue is the transmissions start shifting super hard into gear and jerks the whole truck really bad.
2011 Dodge ram 1500. Consumer writes in regards to vehicle buy back program. *Ld the consumer stated the vehicle should be included in the buyback program for steering and axle failures.*Js
Currently has a hazardous malfunction that is putting myself and my passengers at risk. In the span of 2 months, I have had the steering wheel completely "lock" up while in drive on normal driving conditions (sunny and clear, not too bright, not too windy or wet at all, no fog) when performing a right turn at appropriate turn speeds. You would be unable to maneuver the vehicle out of harm's way when the wheel tenses and locks up completely like this. My first encounter with this issue was turning on a right lane...
Read the full complaint
with your own protected lane at the posted speed limit for the turn. It completely locked up on me and I eased my foot forcibly onto the brake so that I could avoid braking too hard and causing the tires to spin out or worse, hitting the pole that is directly 200 feet away (approximate speed was 35mpn and brake reaction time was 2 seconds, accounting for initial notice of the sudden tension and loss of complete control of the truck's steering.). The second encounter occurred within a 2 month span, this time carefully approaching a street intersection. I fortunately realized what was occurring and tried to move far right and out of harm's way but I could only maintain my appropriate lane. At first I could not take out the key or turn it on or off. It was still in drive to my realization. I put it into park and was able to turn the truck back on and continue my way to work. However, I could only be paranoid that this could occur to me under more severe or worse conditions like rain or fog. What if this malfunction were to occur to me if I was on a very elevated highway or had someone tailing me at that very instance?
Tl* the contact owns a 2011 ram 1500. When the vehicle was started with the gear in park, the gear shifter did not stay locked and randomly switched into other gears. The failure caused the contact to lose control of the vehicle. The vehicle was not diagnosed or repaired. The manufacturer was contacted and advised the contact to have the vehicle diagnosed by a dealer. The dealer was not contacted. The failure mileage was 88,426.
I have broken manifold bolts. Took it to mieneke the mechanic said he could see the bolts shaking so he knew they were broken.
1. When I accelerate the truck my service 4wd drive light comes in and when I slow down at 30mph or lower it goes off. I changed out the 4wd motor already and still have the issue. 2. When I release the gas in town at a speed of 40mph or less you can hear a clicking coming from under the vehicle. When I put it in tow/haul the noise will go away though.
Pulling off a roadway making a right turn, truck stalled, cant turn steering wheel without the engine running! Extremely dangerous!!! Restarted it, very hard to start like it was out of time.After restart, drove about two miles , and the engine light came on and dinged the warning chime. Continued to flash engine light. Had the engine light code read and the problem is # 5 cylinder misfire. Worn lifter or camshaft.This issue should not happen on a truck with perfect maintenance! At 125,000 miles.
At 171599 miles rear axle pinion seal failed. High pitch howling sound was experienced when traveling at high speed. Seal failure resulted in loss of real axle oil which lead to pinion bearing failure. Was told by dealership that all rear axle components would need to be replaced due to possible metal contamination.
Tl* the contact owns a 2011 ram 1500. The contact received a recall notice for nhtsa campaign number: 17v821000 (power train). The contact made several appointments with dick poe chrysler jeep (6501 montana ave, el paso, tx 79925, (915) 778-9331), but they were cancelled each time due to part unavailability. The recall notification was received months ago. The vehicle was not repaired. The contact had not experienced a failure. Parts distribution disconnect.
Ram 1500 transmission complaints by year
1500 transmission problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data