Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Suspension

2012 Tesla Model S Suspension problems

Owners have filed 9 complaints about the 2012 Tesla Model S's suspension with NHTSA - 15% of all its complaints, most recently on December 23, 2020. They describe 3 crashes, 1 fire and 6 injuries. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.

Complaints
9
Recalls
0
Crashes
3
Fires
1
Injuries
6
Deaths
1

Suspension complaints

Suspension

You are investigating tesla front suspension failures. You should also investigate tesla rear suspension failures. Here is just one recent example.Https://www.Iaai.Com/vehicledetails/38453571?Rownumber=39 the suspension link has snapped like a pretzel causing the suspension to flop down like a bad case of brewer's droop. Photo is attached with this submission. Despite tesla issuing technical service bulletins about this and having fitted a slightly improved link to later models these lethal weak links are...

Read the full complaint

still fitted on thousands of cars around the world and pose a danger to tesla occupants and other road users. For many more examples please visit the whompy wheels album https://www.Iaai.Com/vehicledetails/38453571?Rownumber=39 thank you have a great day and ban these contraptions from the roads of the world. Your friend keef

Filed Incident SuspensionNHTSA 11384728
Suspension

Here is a terdsla in the junkyard https://www.Iaai.Com/vehicledetails/38424109?Rownumber=4 front suspension has collolopsed. Tire has rubbed against the inside of the fender and worn a hole through it. Luckily for the owner he was not driving near a cliff at the time or he would have been branded a suicide like the other cases were. Please get these contraptions recalled immediately. Thanks keef

Filed Incident SuspensionNHTSA 11383785
SuspensionElectrical system

The mcu - media control unit is slow to respond to inputs and slow to startup when entering the vehicle. The screen has locked up several times while driving which leaves the turn indicators unusable and the defroster deactivated until the mcu resets. The hazard indicators are inactive when the mcu turns off. The front suspension links wear out prematurely due to a poor design and the weight of the vehicle. Repairs are costly due the main high voltage battery needing to be removed in order to remove the suspension link bolts.

Filed Incident Suspension · Electrical system · Unknown or otherNHTSA 11376392
Suspension

Another tesla in the junkyard. Https://www.Iaai.Com/vehicle?Itemid=24890595&rownumber=53&loadrecent=true suspension has collapsed, wheels jammed up in the wells. This does not look like collision damage. Why does this car not have limit stops on the suspension? A simple air leak can cause the wheels to jam up. Please investigate. Very concerned citizen etc. Etc.

Filed Incident SuspensionNHTSA 10983204
Suspension

Here is a tesla in the salvage yard. Https://m.Iaai.Com/vehicledetenc.Aspx?Auctionid=21921554&itemid=23249264&rowid=16&pagesource=vehicleresults the steering knuckle has snapped in half. The air-bags have not deployed and there is no visible damage to the car that would explain why the knuckle has snapped in half. Up until 2015 the steering knuckle was made from hollow cast aluminum and there have been many other incidents where the knuckle has snapped. The design was changed in 2015 to a solid h-section but failures of that part and of the top ball joint are still ocurring. At the very minimum these cars should be recalled for a safety inspection of the suspension.

Filed Incident SuspensionNHTSA 10925274
SuspensionCrash

Here is another tesla in the junkyard. Https://m.Iaai.Com/vehicledetailimages.Aspx?Imageurl=2&itemid=23306666 the photographs show that the front steering knuckle has snapped in half and the wheel is hanging sideways out of the wheel well. The car has not been in a crash. The air-bags have not deployed and there is no significant damage to the bodywork. These steering knuckles are a made from low pressure die cast aluminium which is clearly not strong enough for the purpose. There are many examples where the knuckle has simply snapped completely in half just like this one. Please investigate before more lives are lost.

Filed Incident SuspensionNHTSA 10917208
SteeringSuspension

Noticed this problem after I was backing up and turning my wheels and would hear a loud metal on metal "clunk" or "grinding" sound. It was coming from the front-left suspension and would occur causing my wheel and steering to feel like it was skipping. I noticed and my steering felt "loose" over bumps and would pull to the left. Again the vehicle is in motion and this was felt the most when turning full motion and/or backing up and turning. When looking at one of the control-arm joints after I noticed a...

Read the full complaint

very loud clunk and comparing it to the other side of of the suspension, it looks like either a bolt fell out or the ball-joint to the control arm was just grinding freely. I've since brought my car to tesla and they have confirmed that I have a defective ball-joint to my control arm thats also damaged my steering knuckle. If I didnt catch this or it was broke at greater speeds whats the likely hood of me loosing control? I've asked if they will replace all the other parts if they have updated parts but they said only the items that are defective in this case will be warrantied. I simply do not feel safe anymore driving this vehicle.

Filed Incident Steering · SuspensionNHTSA 10885723
SuspensionCrashFire6 injuries1 death

This is the stolen car which crashed in hollywood. Photographs at the scene show 3/4 of a wheel and the tire lying on the ground. Here is the listing at the salvage auction site. Http://imgur.Com/a/h7roa the crash site images how the front wheel broken loose. The salvage yard photographs show the other 1/4 of the wheel still bolted to the broken kingpin. The wheel has been sliced in two while still rolling on the road. It would be impossible for that slicing to have occurred post impact. There are 100,00...

Read the full complaint

of these cars on roads around the wordld. If this was an aircraft it would be grounded immediately. I believe this defect is so dangerous that all cars should be taken off the road before people die. The addition of the beta release autopilot makes the situation even more dangerous. Please note.....Fictitious us address to enable lodgement

Filed Incident SuspensionNHTSA 10789052
SuspensionCrash

I am filing these complaints in the public interest. I am not a tesla owner and I have no investment in tesla nor do I hold any shares in the stock-market. This car is in the wrecking yard. The front suspension has failed and the wheel is pushed back against the high voltage controller. Http://www.Salvagereseller.Com/vehicles/details/32315405-2012-tesla-model-s-ca-san-diego there is no other damage that could account for the suspension failure. There was a crash back in 2013 which was blamed on the...

Read the full complaint

driver of the other car. Http://www.Inautonews.Com/tesla-model-s-gets-crashed-driver-walks-away-unharmed if you look at the photo of the tesla on the tow-truck after the accident you will see that the top suspension link has come unbolted. It does not look as though this happened in the accident. It is not snapped, it has fallen off. Image here: http://www.Inautonews.Com/tesla-model-s-gets-crashed-driver-walks-away-unharmed/tesla-model-s-crash-5 all of the blue battery coolant in the reservoir has been lost leading to a high risk of fire. This thread on the tesla forum could explain why the suspension has come loose. Http://my.Teslamotors.Com/forum/forums/model-s-pulls-left-please-read quote: when I got home from work I put the car up on the lift and couldn't believe what I found. The passenger lower ball joint nut was not just loose, it was a few threads away from falling off! I decided to check all the bolts in all for corners of the car and found the same nut on the drive side to be hand tight (it was loose, but hadn't spun all the way down yet). There are many other images on the net of damaged cars where the suspension has failed in a similar manner. If the rh wheel moves back it can damage the hv controller. If the lh wheel moves back it can damage the battery coolant tank and lead to fire.

Filed Incident SuspensionNHTSA 10785486

Tesla Model S suspension complaints by year

Model S suspension problems, every year

Had a suspension problem with your 2012 Model S? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience