Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor (PVM) system. Please see the recall report for a complete list of models. A software error may...
2023-2025 · 3 model years
Toyota BZ4X Problems by year
Owners have filed 37 complaints about the Toyota BZ4X across 3 model years, and it has 4 recalls. The 2024 has the most complaints once its age is allowed for (25). The most reported problem area is the electrical system, followed by the wheels & tires.
- Complaints
- 37
- Recalls
- 4
- Crashes
- 5
- Fires
- 0
- Injuries
- 2
- Deaths
- 0
BZ4X complaints by model year
Highlighted: the year with the most complaints for its age. Older vehicles have had more time to collect complaints - the Safety Index grade allows for that.
Most common BZ4X problems
Toyota BZ4X recalls 4
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2025 bZ4X, Lexus RZ, and Subaru Solterra vehicles. During certain HVAC system faults, such as electrical compressor failure, the defroster and defogger system may become inoperative.
Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander...
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Subaru Solterra and Toyota BZ4X vehicles. The hub bolts on the wheels may loosen, causing a wheel to detach from the vehicle after low-mileage use.
Latest BZ4X complaints
The 12-volt auxiliary battery in my 2024 Toyota bZ4X repeatedly drains and fails, leaving the vehicle completely unable to start. This has happened multiple times since [redacted], including State Farm Emergency Road Service events on XX, requiring jump starts and tows. The first occurrence was at about 8,000 miles. The vehicle becomes inoperable without warning and cannot be restarted, which is a safety concern because it can leave the driver stranded without warning. The selling dealer, Team Toyota of Princeton...
Read the full complaint
in [[redacted]], has been unable to diagnose or repair the problem despite repeated reports and visits in [redacted], and Toyota closed one corporate case without a fix. The problem has not been reproduced or confirmed by the dealer. The vehicle is available for inspection upon request. No crash, fire, or injury occurred. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2023 Toyota BZ4X. The contact stated while at a stop light and depressing the accelerator pedal, there was an abnormally loud sound coming from the vehicle. Additionally, the contact stated that after the A/C system was turned off, the A/C system independently reactivated. The EV System Malfunction warning light was illuminated. A dealer was contacted. The manufacturer was notified of the failure. The approximate failure mileage was 23,000.
The contact owns a 2023 Toyota BZ4X. The contact received notification of NHTSA Campaign Number: 25V577000 (Visibility); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the A/C unit was not working properly. The vehicle was taken to the dealer, and it was determined that the compressor had failed and caused the AC unit to fail to perform as needed. The compressor was causing a...
Read the full complaint
loud electrical humming sound inside and outside the vehicle. The vehicle remained at the dealership waiting for approximately one and a half months for the repair. The failure mileage was approximately 40,000.
I was driving during heavy rain when I heard and felt a big thump. I wasn't sure what happened as I did not hit anything in the road. I was in my neighborhood driving at low speeds (<30mph). When I got home, I realized my fender liners and lower splash guard of my car were missing. I went back out to retrieve these pieces of my car, and it appeared the fender liners and the splash guard got torn off my car without impact with anything, as nothing was in the road near it. I was going to attempt to reconnect...
Read the full complaint
them but the plastic clips on the front bumper also ripped off, making this a very expensive repair requiring bumper replacement and sensor recalibration. This obviously could put others at risk of running over a large number of components that were left in the road. I read many other instances of other people with the same vehicle (as well as with the Solterra) having an issue where the felt fender liners can become saturated with water, sag, and get caught in the wheels, ripping them off. I was one of those unlucky people to lose both sides and the splash guard all at the same time. The dealership / body shop inspected the vehicle. No warnings at all - just sudden ingestion of the fender liners into my drivetrain.
While operating my 2024 Toyota bZ4X at very low speed on the road , I observed a stationary shipping container directly ahead and applied the brake pedal with maximum force approximately 4 seconds before contact. I held the brake pedal at full pressure continuously. I never touched the accelerator. The vehicle came to what appeared to be a complete stop then continued to advance and made physical contact with the container despite my maintained maximum brake input. The vehicle's own ECU-recorded Freeze Frame Data...
Read the full complaint
(retrieved by an authorized Toyota dealer using PCS Data Viewer) confirms the following at the time of the event: Driver brake pedal torque was at sensor saturation (4,048 Nm - the maximum value the sensor can record) for approximately 1.75 seconds prior to impact. Brake hydraulic line pressure peaked at 12.144 MPa and remained above 7.8 MPa throughout that period. Throttle position was 0.0% for the entire recorded interval. All four wheel-speed sensors recorded 0.00 km/h for approximately 2.95 seconds prior to impact. Steering input was effectively neutral; no skid or loss of directional control occurred. The longitudinal accelerometer recorded a peak deceleration spike of -8.97 m/s² at the moment of impact - a value that requires forward velocity and is physically inconsistent with the wheel-speed data showing the vehicle stopped. The Pre-Collision System (PCS) main switch was ON throughout, with no faults, no obstruction flags, and no warning, pre-brake, brake-assist, or auto-brake activation recorded. The Parking Support Brake (PKSB) did not activate. No diagnostic trouble codes were set. In plain terms: with maximum brake pressure applied and zero throttle input, my vehicle continued to move forward into a clearly visible stationary obstacle. The brakes did not maintain authority over the powertrain's creep torque, and no advanced safety system intervened. This indicates a potential defect in the vehicle's brake-override / creep-suppression
The vehicle experienced a sudden, catastrophic brake-by-wire system failure while operating in one-pedal driving (Regeneration Boost mode). While decelerating at a low speed behind an 18-wheeler semi-truck, the vehicle failed to continue slowing down. I immediately depressed the physical brake pedal, but the vehicle completely ignored the foot pressure. The pedal and braking system became completely unresponsive, and the vehicle kept rolling forward uncommanded. Despite keeping the brake pedal fully depressed,...
Read the full complaint
the vehicle did not decelerate, resulting in a front-end low-speed collision with the metal rear bumper of the semi-truck. Because the collision occurred at a very low speed, the operator of the commercial truck was unaware of the impact and safely continued driving forward without stopping. The vehicle's brakes entirely refused to re-engage until I frantically pumped the physical brake pedal and cycled/pressed vehicle control power switches. This action seemingly forced the electronic braking modules to reboot or re-establish hydraulic pressure, allowing the vehicle to finally come to a stop. The vehicle was subsequently removed from the active roadway. This is a severe, life-threatening safety defect involving a total loss of electronic brake-by-wire and friction braking application without any mechanical override intervention, presenting an extreme hazard. The vehicle has been towed directly to an authorized Toyota dealership for a comprehensive electronic diagnostic pre-scan of the Skid Control ECU, Electronic Parking Brake system, and 12-volt auxiliary power systems to retrieve the stored DTC fault logs and freeze-frame data.
Questions about the Toyota BZ4X
Which Toyota BZ4X years have the most problems?
Which Toyota BZ4X years have the fewest complaints?
Among model years that have been on the road for at least three years, 2023 have the best Safety Index - the fewest complaints, crashes and recalls for their age compared with other BZ4X years. Always check the exact vehicle's recalls by VIN before you buy.
What are the most common Toyota BZ4X problems?
Across every model year, owners report problems with the electrical system (13), wheels & tires (7), visibility & wipers (6) most often.
How many recalls does the Toyota BZ4X have?
NHTSA lists 4 recalls across all Toyota BZ4X model years. Each year's page lists the recalls for that year; check your own vehicle by VIN at nhtsa.gov/recalls to see whether the repair has been done.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data