Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota Corolla hatchback vehicles equipped with Continuously Variable Transmissions (CVT). The pump impeller blades within the torque converter may detach, especially when driven...
Transmission & drivetrain
Toyota Corolla Transmission problems by year
702 complaints filed with NHTSA about the Toyota Corolla's transmission & drivetrain. Harsh or delayed shifting, slipping, CVT shudder, rollaway, axles, driveshafts and transfer cases.
Transmission complaints by model year
| Year | Transmission complaints | Crashes | Injuries | Recalls |
|---|---|---|---|---|
| 2025 | 2 | 0 | 0 | 0 |
| 2024 | 8 | 0 | 1 | 0 |
| 2023 | 6 | 0 | 0 | 0 |
| 2022 | 17 | 0 | 0 | 0 |
| 2021 | 19 | 0 | 1 | 0 |
| 2020 | 41 | 1 | 3 | 0 |
| 2019 | 57 | 1 | 0 | 1 |
| 2018 | 12 | 1 | 1 | 0 |
| 2017 | 17 | 2 | 2 | 0 |
| 2016 | 23 | 1 | 0 | 0 |
| 2015 | 30 | 4 | 0 | 0 |
| 2014 | 28 | 2 | 0 | 0 |
| 2013 | 9 | 1 | 1 | 0 |
| 2012 | 8 | 1 | 0 | 0 |
| 2011 | 18 | 0 | 0 | 0 |
| 2010 | 50 | 9 | 2 | 0 |
| 2009 | 45 | 5 | 0 | 0 |
| 2008 | 13 | 0 | 0 | 0 |
| 2007 | 27 | 1 | 0 | 0 |
| 2006 | 47 | 7 | 6 | 0 |
| 2005 | 40 | 3 | 1 | 0 |
| 2004 | 17 | 2 | 0 | 0 |
| 2003 | 66 | 5 | 0 | 1 |
| 2002 | 8 | 0 | 0 | 0 |
| 2001 | 10 | 1 | 1 | 0 |
| 2000 | 7 | 2 | 0 | 0 |
| 1999 | 6 | 1 | 1 | 0 |
| 1998 | 8 | 0 | 0 | 0 |
| 1997 | 7 | 0 | 0 | 0 |
| 1996 | 5 | 0 | 0 | 0 |
| 1995 | 13 | 0 | 0 | 0 |
| 1994 | 6 | 2 | 1 | 0 |
| 1993 | 3 | 1 | 0 | 0 |
| 1992 | 6 | 0 | 0 | 0 |
| 1991 | 8 | 2 | 2 | 0 |
| 1990 | 5 | 0 | 0 | 0 |
| 1989 | 4 | 0 | 0 | 0 |
| 1988 | 2 | 0 | 0 | 0 |
| 1987 | 1 | 0 | 0 | 0 |
| 1985 | 1 | 0 | 0 | 0 |
| 1984 | 1 | 0 | 0 | 0 |
| 1980 | 1 | 0 | 0 | 0 |
Transmission recalls
On passenger vehicles with vehicle identification numbers (vin) starting with 1nx only and built from january 8 through february 13, 2002, it is possible for the bolts that join the rear brake and hub assembly to the rear axle carrier to be loose due to...
Latest Corolla transmission complaints
I am writing to report a transmission issue with my 2019 Toyota sedan. The vehicle is producing a high-pitched noise from the transmission, identical to the issue described in Campaign J17. Although that recall was specified for hatchbacks, my sedan is experiencing the exact same problem. Currently, there are no open recalls listed for my specific VIN, and no warning lights have appeared on the dashboard. An independent service center inspected the vehicle and confirmed that internal transmission components...
Read the full complaint
(bearings or blades) are causing the noise. However, local dealerships have declined to inspect or assist because the issue is not officially listed under the recall for my body style. Since the manufacturer has not yet inspected this vehicle, I request that this issue be reviewed for potential coverage or extended assistance. Please let me know how we can proceed with having my vehicle officially evaluated.
Failed Component: CVT transmission Safety was put at risk: Vehicle has a humming sound that varies pitch with speed, issue was first noticed on the freeway requiring us to stop on the side of the road with vehicles passing next to us at 70mph. Has the problem been reproduced and confirmed by dealer: Yes, vehicle was taken to Arlington Toyota in Jacksonville Florida and they confirmed CVT transmission needs replaced. The cost to replace the transmission was quoted at $11,124.97. Has the vehicle or component...
Read the full complaint
been inspected by the manufacturer, police, insurance representatives or others?... Vehicle has only been checked by Arlington Toyota in Jacksonville Florida which is an authorized Toyota service center. Where there any warning lamps, messages or other symptoms of the problem: No warning lamps or messages, only humming sound from drive train was noticed.
I am reporting an intermittent clutch hydraulic system malfunction that presents a serious safety concern. The symptoms strongly suggest a potential failure of the clutch slave cylinder, master cylinder, hydraulic seals, or another component of the clutch release and pedal-return system. The clutch pedal intermittently fails to return to its normal resting position after being depressed. When this happens, hydraulic operation appears to be compromised, resulting in difficulty or an inability to disengage the...
Read the full complaint
clutch and shift gears. The pedal may remain depressed or fail to return sufficiently to allow normal clutch operation. The malfunction left me unable to reliably shift the vehicle back into first gear while stopped. I have had to shut the engine off to get the transmission into first gear so I can move the vehicle out of the road way. This creates a significant safety hazard, particularly at intersections, in traffic, and in situations where the vehicle must be moved quickly to avoid obstructing or endangering other motorists. The intermittent nature of this failure makes it especially dangerous because the driver cannot predict when clutch operation will be compromised. A sudden loss of clutch hydraulic pressure or failure of the clutch release mechanism could leave the vehicle immobilized in an active roadway or prevent the driver from safely maneuvering the vehicle. The vehicle has approx. 86000 miles and has not been repaired nor inspected, as of now, exact cause is unknown. No prior slippage or symptoms prior to the malfunction happening. There were no warning indications or lights. I believe this warrants investigation as a potential safety-related defect, especially if similar failures have been reported by other owners. A malfunction that prevents reliable clutch disengagement and gear selection can leave a vehicle unable to move safely out of traffic or unintended vehicle movement and creates an avoidable risk of collision or injury.
A critical oversight in the execution of an official Toyota Special Service Campaign (JSD) resulted in the severe premature failure of a replacement CVT assembly, creating a severe high-speed safety hazard on a highway. The vehicle experienced an abrupt mechanical lock-up, power loss, and transition into an extreme "limp mode" while operating at highway speeds. This sudden deceleration in active traffic created an immediate rear-end collision hazard and a severe handling emergency. Sequence of Events: 1. Initial...
Read the full complaint
Assembly Replacement (May 2019): The vehicle's original K313 CVT transaxle assembly failed and was replaced at an authorized Toyota dealership with a factory-remanufactured unit. Review of the repair invoice confirms the physical hardware swap and CVT fluid line items were executed. However, the dealership omitted the mandatory Electronic Control Unit (ECU/ECM) software reflash mandated by Toyota Special Service Campaign JSD to prevent the internal gear-ratio control solenoid valve from cycling unnecessarily and experiencing abnormal mechanical wear. 2. The new, remanufactured CVT assembly was subsequently operated for approximately 9,000 miles with the defective original software. Then, the vehicle was returned to the same authorized dealership for a different recall at the time. The invoice explicitly documents the retro-active application of the software with: "JSD Special Service Campaign - PERFORMED SOFTWARE UPDATE." 5. Premature Secondary Failure (Current): Approximately 42,000 miles following the installation of the replacement transaxle, the unit suffered a catastrophic mechanical failure on the highway. Per official technical service data, operating the K313 CVT transaxle under the uncorrected software logic subjects the CVT to abnormal mechanical fatigue. The incomplete execution of an active safety campaign by an authorized modifier directly compromised the operational lifespan and integrity of a primary powertrain component.
SYSTEM THAT FAILED: Powertrain / Continuously Variable Transmission (CVT) and differential/transaxle assembly. The component is currently intact and available for inspection at the diagnosing dealership. SAFETY RISK DESCRIPTION: While traveling on the highway, the vehicle suffered a physical jolt followed by a loud, sustained mechanical whirring noise. The powertrain immediately dropped into an un-commanded "limp mode" that capped the maximum speed to below 40 MPH. Upon attempting to accelerate out of active...
Read the full complaint
highway traffic toward an exit ramp, the CVT slipped severely, causing the engine speed to fluctuate violently and rhythmically between 1,000 and 3,000 RPM while failing to transmit power to the wheels. This sudden, unexpected loss of propulsion on a highway created an immediate and severe collision hazard to the operator and surrounding motorists. DEALER CONFIRMATION & INSPECTION: The vehicle and its components have been officially inspected and diagnosed by an authorized manufacturer dealership. The dealership's shop foreman personally verified a total mechanical failure of the transaxle and differential assembly, noting that the component is physically stuck in a lower gear. No insurance or police inspections were conducted, as the safety event did not result in an accident. WARNINGS & PRIOR SYMPTOMS: There were absolutely no warning lamps, dashboard messages, or pre-failure symptoms prior to this specific incident. Onboard diagnostics failed to provide any prior warning to the operator. Furthermore, a subsequent computer diagnostic sweep by the dealership confirmed that zero electronic Diagnostic Trouble Codes were triggered or stored, confirming a sudden, purely physical mechanical breakdown. This vehicle represents a repeat structural failure of a manufacturer-supplied safety remedy. The current Toyota dealer-installed replacement from a previous JSD campaign remedy suffered the exact highway mechanical breakdown after only 43,000 miles of operation.
What component or system failed or malfunctioned: complete slave cylinder failure resulting in loss of braking and ability to shift. Luckily I was traveling at a low rate of speed when this happened, but if this happens to anyone on the freeway or while turning against traffic for example they would have no control of their car and could be seriously injured. I took it to the dealership and they diagnosed it as a slave cylinder failure at only 70k miles. This is incredibly pre-mature. The vehicle has not been...
Read the full complaint
inspected by the manufacturer, only the dealership but I am trying to escalate the issue. No warnings at all, I regularly get my car serviced on there were no instances of the clutch acting strange or brakes losing power (because the clutch and brakes share the same fluid reservoir) prior to this incident.
The contact owns a 2019 Toyota Corolla. The contact stated that while driving at an undisclosed speed, the clutch was depressed; however, the clutch system failed to operate as intended. The contact stated that the clutch was stuck to the floorboard. The contact stated that due to the failure, there was an excessive amount of clutch fluid leaking onto the ground. The vehicle was towed to the residence. The contact stated that the failure was a known failure. The manufacturer was contacted by phone and a case was filed. The failure mileage was approximately 104,000.
The concentric slave cylinder in my vehicle is a big issue with these cars. There has been so many reports of issues happening with these cars manual transmission Corolla's. This can cause fluid to spew, brakes to stop working, and no longer able to drive the vehicle safely. This part should be recalled and covered by Toyota.
Component that failed was the CSC Concentric Slave Cylinder. I went to press the clutch and it stuck to the floor. I checked for leaks in the cabin beneath the clutch and it was dry. I then proceeded to check the reservoir and saw that it needed fluid. I managed to get it to a nearby convenience center to purchase and fill the reservoir when that did not work I called a tow truck to move it to an auto repair shop. This put others at risk, should the clutch have remained in neutral I would have, and or all the break...
Read the full complaint
fluid would have leaked and i would have been without brakes since the clutch and break share a reservoir. This issue could have caused serious life threatening injuries not only to myself but others had there been an accident. Thankfully this took place at 4 am before other drives were out and about for the morning commute. The component has since been looked at by an independent service center. There were no warning lamps or messages prior to the issue. the vehicle currently has roughlty 84,000 miles.
The CV joint, there is a clicking sound when sharp turns are make to include U-turns. Spoke with a mechanic and was instructed to reach out to the dealership and check for recall on it. I did see any but I see a Technical Service Bulletin ( TSB-0106-20) for 2015- 2021 Corolla models regarding a potential clinking noise during sharp turns and u turns. This may have started three months ago. It is more noticeable now that I am driving more.
I bought this Toyota second hand with a little over 29k I had it less than a month when the slave cylinder failed. While in this particular Corolla the slave cylinder and brake booster share fluids. So when I lost my clutch I also lost my brakes with my toddler In the car. Toyota is aware of the faulty slave cylinders and has decided to fix them as they come vrs doing a recall. We could have died. And to top it off Toyota refused to cover it under their power terrain warranty. The car still doesn't drive correctly even after the dealership I bought it from agree to cover the cost. This is a 2022 Toyota Corolla se Manual transmission.
Slave cylinder on clutch failed and leaked fluid in to clutch and flywheel. Clutch pedal would not rebound after being pressed in to shift gear, stuck in middle of road trying to get vehicle in first gear. Had vehicle towed to dealership, estimate of 5800 to repair. Apparently this is a known problem with this manual transmission, many others have experienced similar failure at around 60,000 miles.
The contact owns a 2022 Toyota Corolla. The contact stated that while shifting gears on several occasions, the clutch was sticking. Additionally, while shifting from 1st to 2nd gear, the clutch was almost stuck to the floorboard. The contact placed a foot behind the clutch pedal to raise the clutch pedal manually off the floorboard. The contact stated that the brake fluid reservoir had drained; however, after adding brake fluid to the brake reservoir, the brake fluid level was low two days later. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was 89,000.
The contact owns a 2017 Toyota Corolla. The contact stated that while the vehicle was at an independent mechanic for brake service, the contact was informed that the transmission chain had fractured and needed to be replaced. The vehicle was towed to another independent mechanic for the transmission to be replaced. The vehicle was not yet repaired. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 111,000.
A severe, pre-existing life-safety defect and unauthorized structural modification were discovered on my 2024 Toyota Corolla . Following a routine diagnostic check for vehicle pulling, certified Toyota technicians discovered that the vehicle's primary fuel line had been dangerously altered and was held together underneath the chassis by an unsecured wire clothes hanger. The vehicle was immediately grounded as an active fire and explosion hazard. A forensic vehicle inspection by a major insurance carrier...
Read the full complaint
(Traveler's) subsequently denied standard repair coverage, formally documenting that the wire-rigged fuel system was a pre-existing mechanical defect resulting from previous work done prior to my purchase of the vehicle from McCluskey Automotive. The selling dealership actively concealed an unroadworthy condition that exposed myself and my minor daughter to a catastrophic vehicle fire.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data