Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Brakes

Victory Vision Brake problems by year

23 complaints filed with NHTSA about the Victory Vision's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.

Brake complaints by model year

YearBrake complaintsCrashesInjuriesRecalls
20131000
20115000
20092000
200815000

Latest Vision brake complaints

2011 Victory VisionBrakes

Almost all owners I know are having rear brake failures on their victory visions with abs. The brakes seem to taking air in and you are left with no brakes. 2011 To 2017 I have gone to use my brakes and found I had none in the back. Causing me to use all front brakes and of course a much longer stopping distance. This is very dangerous.

Filed Incident Service brakesNHTSA 11355654
2008 Victory VisionBrakes

The rear brakes have failed a number of times. I have had them bleed and master cylinder replaced at the dealer but the problem continues to occur. Now that victory is no longer around service is becoming impossible. This is an extreme danger and the problem reoccurs. Air is getting into the lines somewhere. Bike is now parked as it is too dangerous to ride.

Filed Incident Service brakesNHTSA 11232193
2013 Victory VisionBrakes

The rear brake master cylinder has needed to be replaced twice in the 5 years that I have owned this motorcycle. Each time it failed it caused a loss in the ability to stop the bike while riding. I have been told by the dealership that I purchased the bike from that this is a common problem with many victory brand motorcycles. I have been told by the service manager at my dealership that the part can't be repaired but must be replaced, but the replacement parts, while they work as they should, are no better than the original parts and there is no guarantee that the same problem will not occur again in the future.

Filed Incident Service brakesNHTSA 11231287
2008 Victory VisionBrakes

The rear brakes on my victory vision have gone out several times. I have tried everything that I can think of to fix the problem. Victory/polaris needs to recall this item and fix it. Driver safety is of great importance.

Filed Incident Service brakesNHTSA 11131683
2008 Victory VisionBrakes

When bike sits for a few weeks the rear break goes soft. Have to have mechanic bleed the breaks 1 or 2 times a year. Somehow air is getting in the line eather from break line or master cylinder. Problem is recurring.

Filed Incident Service brakesNHTSA 10990670
2008 Victory VisionBrakesFuel system

Have had several issues with rear brake failure. Rear brake pedal goes all the way down, and does not engage the brakes. No leak signs of any fluid. This seems to be a serious problem with victory motorcycles after doing some research on line. Www.Vision-riders.Com. I have had my bike in the shop several times with this issue. The brakes were bled every time the rear brakes failed. I was traveling on a city street, a black in color chevrolet truck had pulled out in front of me. I immediately applied by front and...

Read the full complaint

rear breaks. When I applied my rear brakes, the pedal went down to the floor. I downshifted as fast has I could in order to avoid striking the vehicle. Victory dealership stated that no recalls have been put out by victory. Please look into this matter before someone gets hurt or even killed. Thank you. *Tr

Filed Incident Service brakes · Fuel / propulsion systemNHTSA 10884354
2011 Victory VisionBrakes

Rear brakes, which is the link system for the abs, continue to fail. Will work and unexpectedly completely fail, rear pedal will go to the floor without any stopping. Have 21,500 miles, the rear master cylinder was replaced at 18,500 miles. On going issue that puts rider safety in danger. I have had the brake lines bled repeatedly and is only a short term fix. This can happen at anytime, after being stationary or while riding. On-going issue, to many dates.

Filed Incident Service brakesNHTSA 10822100
2011 Victory VisionBrakes

When braking for stop sign, noticed back brakes failed. Took motorcycle to dealer and they informed me the back brake master cylinder was defective. *Tr

Filed Incident Service brakesNHTSA 10700828
2008 Victory VisionBrakes

While exiting I 75 to buy 50 west my rear brake failed leaving me only 1/2 front brakes. Traverser polaris in ross oh. Made warranty repairs on 7/3/14. On 8/17/14 the brakes failed again on pa rt. 641 Whereby I nearly went over a 200 foot cliff. Traverser repaired the brakes a 2nd time on 8/19 /14. The brakes failed a 3rd time on 9/6/14. In cincinnati near oh rd 50 in sadansville. I afraid to let traverser repair them again. *Tr

Filed Incident Service brakesNHTSA 10631637
2008 Victory VisionBrakes

The rears brakes on my victory vision are working correctly the pedal is going to the floor. All of the pads are brand new. I have bleed the brakes two times they work better then stop working and the pedal after about 45 miles starts to go back to the floor. I have also read that many people are also having the same problem with victory vision rear brakes on their bikes. *Tr

Filed Incident Service brakesNHTSA 10604749
2011 Victory VisionBrakes

Tl* the contact owns a 2011 victory vision motorcycle. The contact stated that the rear brakes failed intermittently. The vehicle was taken to an authorized dealer who diagnosed that the master cylinder needed to be replaced. The vehicle was repaired and the failure recurred. The manufacturer was notified of the failure. The approximate failure mileage was unknown.

Filed Incident Service brakesNHTSA 10598585
2008 Victory VisionBrakes

Rear brakes have failed twice. Fixed both times under warranty. They have twice replaced parts and have no guarantee it wont fail again. Seem to happen to their motorcycles after sitting for a few weeks. *Tr

Filed Incident Service brakesNHTSA 10572752
2008 Victory VisionBrakes

Tl* the contact owns a 2008 victory vision motorcycle. The contact stated that the brakes failed to function properly. The vehicle was taken to the dealer where the failure could not be replicated. The manufacturer was contacted about the failure. The failure mileage and vin was not available. *Tr

Filed Incident Service brakesNHTSA 10568535
2008 Victory VisionBrakes

Rear brake suddenly not functional brake pedal goes all the way down to floorboard. This has now happened again for the 4th time in 5 years. Victory shop says they just have to bleed from the front caliper to remove air. They tell me that victory says it is due to the vinyl brake line, and that temperature changes cause air to build up in the apportionment valve. This is a very dangerous problem, and seems to have affected hundreds of bikes from reading forums on the internet. Polaris needs to find a fix and perform a recall. *Tr

Filed Incident Service brakesNHTSA 10526231
2009 Victory VisionBrakes

Tl* the contact owns a 2009 victory vision. The contact stated that while driving 50 mph, the motorcycle failed to respond to deceleration attempts. The motorcycle was taken to a dealer for diagnosis and the brake lines were bled. The motorcycle was repaired but the failure recurred. The contact stated that the failure recurred multiple times and the master cylinder was replaced several times. The failure mileage was 2,000 and the current mileage was 9,000. Updated 07/02/13*lj

Filed Incident Service brakes, hydraulicNHTSA 10512073

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience