Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Lights

Yamaha FJR1300 Lighting problems by year

7 complaints filed with NHTSA about the Yamaha FJR1300's lights. Headlights, tail lights, brake lights, turn signals and interior lighting failures.

Lighting complaints by model year

YearLighting complaintsCrashesInjuriesRecalls
20200001
20190001
20181001
20170001
20160001
20150001
20141001
20130001
20121000
20111001
20073000

Lighting recalls

Exterior lighting: switch

20V81400018,203 vehicles affected

Do not drive

Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2018-2020 MTT9GT (Tracer GT), 2019 MXTGTKL (NIKEN GT), 2017-2020 MT10, 2018-2020 XTZ12 (Super Ténéré), 2013-2020 FJR13, 2018 XV19B (Star Eluder), and 2018-2021 XV19 (Star Venture) motorcycles. The...

Latest FJR1300 lighting complaints

2018 Yamaha FJR1300Engine & coolingTransmission & drivetrainLights

The contact owns a 2018 Yamaha FJR 1300. The contact received notifications of NHTSA Campaign Numbers: 20V814000 (Exterior Lighting), 20V813000 (Power Train), and 21V865000 (Engine and Engine Cooling). The vehicle was taken to the local dealer, but the vehicle was not repaired due to the parts being on back order. The manufacturer was contacted and confirmed that parts were on back order. The contact had not experienced failure.

Filed Incident Engine and engine cooling · Power train · Exterior lightingNHTSA 11751773
2014 Yamaha FJR1300Lights

The contact owns a 2014 Yamaha FJR1300. The contact was informed of the unrepaired NHTSA Campaign Number: 20V814000 (EXTERIOR LIGHTING). After contacting the local dealer and the manufacturer, the contact was informed that the recall repair was previously completed at the local dealer, even though the VIN update indicated that the recall status was incomplete. No further information was available.

Filed Incident Exterior lightingNHTSA 11734487
2012 Yamaha FJR1300Electrical systemLights

I was riding the motorcycle during daylight hours, and I noticed some glitchy electrical behavior. The turn signal indicators were dimly lit, turn signals themselves were inoperative, horn inoperative, windshield vertical adjustment inoperative, etc. The important part was that both headlights were inoperative, which would be a huge problem if I was riding during nighttime hours. The engine continued to operate normally and I rode the bike home. The symptoms indicated a failed grounding connector. I removed the...

Read the full complaint

left side fairing and located a ground connector under the glove box/storage compartment that had scorch/burn marks on it. I cleaned the connector and applied conductive grease to prevent future corrosion. Problem solved...all electrical components worked normally. There was a previous NHTSA campaign for 2006-2009 FJR1300 models, 11V-338, that addressed a failed grounding connector. This bike is a 2012 model which was not addressed by the earlier campaign, and my failed grounding connector was a different one than was addressed by the campaign. I'll attach a photo of my failed connector as well as a schematic of the ground connectors. The schematic is not an official Yamaha drawing, but from a group of FJR owners that have been working to solve the grounding problems. The original campaign addressed only the "S4" connector located under the fuel tank near the coolant thermostat on the forward left-hand side of the engine valve cover. My failed component was the "S6" connector located under the glove box/storage compartment. I located all 8 ground connectors on my bike, cleaned them and applied conductive grease to each one to hopefully avoid any future electrical problems. Yamaha needs to come up with a fix for the "S6" connector. If a rider is out riding at night and that connector fails, and the headlights suddenly go out...it could be very difficult to keep the bike on the road and avoid a crash.

Filed Incident Electrical system · Exterior lightingNHTSA 11494971
2011 Yamaha FJR1300Electrical systemLights

A grounding block in the electrical system overheated and failed. The loss of ground caused several electrical anamolies, the most serious being that the headlights failed. Fortunately, this failure happened during the day at the beginning of my ride; it would have been very serious if the headlights had failed at night. Yamaha has issued a recall for earlier model years for a similar issue, but my failure was a different grounding block, in the nose fairing, not under the tank. I connected the wires from the grounding block together and everything works normally again.

Filed Incident Electrical system · Exterior lightingNHTSA 11342830
2007 Yamaha FJR1300Electrical systemLightsEngine & cooling

High beam indicator came on, turn signals failed to operate, bike would not restart after stopping. This was all caused by ground spider 6 burning and failing.

Filed Incident Electrical system · Exterior lighting · EngineNHTSA 10725381
2007 Yamaha FJR1300Electrical systemLights

Bike has had the factory recall that connects a more direct path of battery ground to the s 4 buss. However, this only helped with load on the components of the s4 connector. My lights went out because the down stream from the s4 connector, the s6 (had burned contacts) which the feed the s7 connector for the lh head light and the s8 connector for the rh headlight. The combination of current from both lights thru one pin at the s6 connector cause the connector to build up heat damage and kill the ground path for both headlights at the same time. *Tr

Filed Incident Electrical system · Exterior lightingNHTSA 10454813
2007 Yamaha FJR1300Electrical systemLights

I was riding home from work in the dark on my 2007 yamaha fjr1300 motorcycle on a unlit, curvy, rural road when both my headlights suddenly died. Although I was able to avoid crashing, this is a huge safety concern. I am a 30 year experienced auto/motorcycle mechanic and certified as an aircraft mechanic, so I troubleshot and found the headlight failure was caused by an overheated/burned grounding connector located in the wiring harness above the left headlight shell (burnt connector and/or photo available on...

Read the full complaint

request). Because the connector was no longer useable, I cut the connector off and soldered all the wires together to restore the ground path for the headlights. As of today, with 52,000 miles on the motorcycle, there have been no additional failures of the headlights. I hasten to add that this failure is unrelated to nhtsa campaign # 11v-338, which addresses a failure of a grounding connector under the fuel tank on the motorcycle. As a very active member in the online yamaha fjr1300 owners community at www.Fjrforum.Com, I am very in tune with all matters related to this motorcycle and would be more than happy to assist in an investigation of this serious safety defect. *Kb

Filed Incident Electrical system · Exterior lightingNHTSA 10413801

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience