The four u-bolts nuts on either side of the rear axle were under-torqued.
Suspension
Chevrolet C30 Suspension problems by year
1 complaints filed with NHTSA about the Chevrolet C30's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Suspension recalls
Trucks were assembled with the left-hand lower control arm to frame rear nut tightened below the specified torque. Low torque on this nut may allow the attachment bolt to loosed and subsequently fatigue and break. The bolt breakage can cause the left hand...
The left hand lower control arm can crack starting at the rear flange and progressing to the ball joint mounting hole and eventually cause the lower ball joint to separate from the control arm.
The left and right front suspension crossmember strut rods, which give added strength, may have been omitted during assembly. Consequently, a frame crossmember crack could eventually develop at the forward vertical front suspension bolt.
The front suspension control arms were assembled with ball joints which may contain sockets that were not properly heat-treated. This may cause the socket to wear rapidly and allow the ball joint stud to separate from the socket, causing either the left or...
Latest C30 suspension complaints
The van was in an accident. Due to the impact of the hit, and the fact that the van is not suitable per fda requirements for a car seat. I had to install a seat from another suv in order for the car seat to be installed. This was my only vehicle and the fact that there was no option for a safe infant car seat is unacceptable. I was hit by a driver that caused major impact and could have resulted in death due to safety concerns.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data