Took vehicle in for exhaust repair. When hoisted up the mechanic informed me of engine cradle rot. He said the drip hose is dripping onto the engine cradle. Called chrysler custome assistance, they sent me to roseville chrysler in roseville, mi for inspection, under case #32879012. Service advisor bryan collins told me the same thing engine cradle rot due to drip hose dripping on engine cradle. Chrysler customer assistance said no recall on vehilcle and it is out of warrenty. My responsibility for repair. I explained that it was an enginering design error and the drip hose should have been long enough to route it past the engine cradle.
Engine & cooling
2006 Chrysler Pacifica Engine problems
Owners have filed 247 complaints about the 2006 Chrysler Pacifica's engine & cooling with NHTSA - 34% of all its complaints, most recently on August 11, 2025. They describe 4 crashes, 2 fires and 3 injuries. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.
- Complaints
- 247
- Recalls
- 0
- Crashes
- 4
- Fires
- 2
- Injuries
- 3
- Deaths
- 0
Engine complaints
MOTOR MOUNTS ARE BROKE
The engine cradle is rusting out due to chryslers inability to want to fix the problem. Might have to send the car to the junkyard
Took car in for routine oil change. Tech came back and said that the engine is about ready to fall through due to the frame and engine cradle rusting through.
The cross member that supports the drive train is rusted at the joints where it meets the frame of the vehicle. This affects both steering and shifting, as the motor will actually shift on initial pull off; and because the steering is anchored on the same member, looseness in the steering wheel can also be felt. I noticed the rusting about a year ago when I went to do my first oil change as the car owner. On 9/12/2017 I was riding home and heard a metallic clank, as if something had fallen off of the vehicle. Upon...
Read the full complaint
arriving at home, I looked under the vehicle. You can see that the cross member is rusting and twisting under the load of the engine. I am leary about driving the vehicle, but it is my only mode of transportation.
Frame rotted out under engine, garage said engine could fall out. This happened several years ago just took it in for an alignment and they told me the car wasn't safe to drive.
SUB FRAME RUSTED
I just purchased my vehicle a month ago and I already have engine cradle corrosion I was told the vehicle is not safe to drive and was told it can snap at any minute which can cause fatalities or serious injuries. I was also told my vehicle has no resale value because of this issue. I was driving on city expressway and streets and noticed it sounded funny driving took it in to get looked at and the mechanic explained the issue was serious
2006 Pacifica with 105,000 miles. Took in for service and mechanic found badly corroded engine cradle. I can peel the rust away and put my fingers in the holes and gaps in the center support tie in. In addition to stress cracks in the lh side of the engine support. Dealer told me no warranty coverage, no recall. Cant afford repair and car is unsafe to drive. Frame rusted out after only 11 years old!! What happened to "made in america" stood for quality and being a good thing.
Car began to make loud, abrupt knocking noise from right side, passenger front of vehicle. We took it to three separate repair shops for evaluation and at all three repairs shops were told that our engine cradle was so badly rotted and rusted that the car was not drivable. It was a huge safety concern as the engine and transmission can both drop out of the vehicle at any moment without warning. This has been a known issue to chrysler and they are not assisting current owners with repair.
Engine mount/cradle has rusted through. The car doesn't have 100,000 miles yet. This issue probably started years ago and no mechanic notified me before the warranty ran out. I understand that chrysler isn't covering 2006 models even though they know this is an issue. I was told continuing to drive the car was dangerous, but this is a very costly fix - more than the car is worth - considering chrysler will not take responsibility for not coating the engine cradle to prevent this from happening. It is affecting steering and handling of car as well.
The engine cradle is rusted out making this car extremely unsafe to drive. This car has been maintained throughout its life and is in excellent shape otherwise. However, the cost to replace the cradle has been quoted at $2500.00.
Tl* the contact owns a 2006 chrysler pacifica. The contact stated that there was premature rust and corrosion, which deteriorated the quality of the engine cradle. An independent mechanic diagnosed that the engine cradle needed to be replaced. The manufacturer was notified of the failure to determine if they could provide a solution and determine if the same oem part was in production or if a new manufacturer designed the engine cradle. The failure mileage was not available.
ENGINE CRADDLE RUST & CRACK
I was on freeway doing 60_70 miles per hour when I noticed my car felt like it was not accelerating and gas pedal felt stiff like when car is off. I had my whole family in car and I could of wrecked if I didn't notice in time to put car in neutral and restarted it some how before we got rear ended. I got off freeway somehow and turned car on and off again a few times and it seemed like it was a one time thing . A few miles later it did same thing and I was stalled out in middle of on coming traffic . Cars braked...
Read the full complaint
and swerved out of my way to avoid rear ending us . My children were scared cause of this happening out of the blue. I now have no desire to even drive my car with any of my family in it incase this happens again. I contacted chrysler but they claimed my vin wasn't part of the f44 recalls but I know it is same issues...I will be taking car to chrysler first thing in morning to leave them car to find out why my family almost got in accident due to this issue. So in total it stalled out on me 6 times twice on freeway the rest on city streets just to get home ....This is a serious issue that could of killed everyone in my vehicle if I didn't react fast enough to avoid that from happening..
Tl* the contact owns a 2006 chrysler pacifica. While the vehicle was stationary, the engine cradle rotted. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 130,000.
" Takata recall "its all rusted front subframe to much dangerous to hi way and to all motorist and the people if this subframe will collapse if drive.
Tuesday, october 25, 2016 the engine cradle rusted through and the engine lowered and the cradle itself was dragging along the street. My wife was leaving our town of owosso, michigan to go to doctor appointments in lansing, michigan about 35 miles away. The pacifica had 119,101 miles on it and was otherwise in excellent condition. We had purchased the car from a chrysler dealership about 15 miles away about seven years prior with 42,000 miles on it. It had always been serviced at the dealership until the dealership was sold in february 2016. Without repair the value of the vehicle was just scrap metal, repair was an absolute to salvage any value, the repair cost $3214.07. *Tr
While driving my car I turned on my turn signal to turn right onto the highway, and upon accelerating my check engine light beeped and turned on, then as I turned my wheel and tried to accelerate it wouldn't and then my car died. I then had my car towed to my house where it remains until I have it towed to the dealership. *Tr
Tl* the contact owns a 2006 chrysler pacifica. While the vehicle was undergoing routine service, the technician noticed rust on the engine cradle. The vehicle was taken to an independent mechanic where it was diagnosed with severe engine cradle rust. The vehicle was unsafe to be driven and was not repaired. The manufacturer was not notified. The failure mileage was 89,000.
This vehicle had a recall from chrysler. I was given a claim #[[redacted]] and when I spoke to chrysler I was told that our vin # was not covered due to the fact that they themselves had ended the recalled vehicles 2 weeks before ours was produced. That is absolutely ridiculous as our vehicle suffered the exact same problems as they all did 2 weeks earlier!!! Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
I have owned this 2006 chrysler pacifica fwd touring model since brand new. We live in michigan so of course there are winter issues associated with cars in general. However, this vehicle is in great condition garage kept all of its life unless driving, no surface rust,etc etc. Basically a great car. I went to get the oil changed and the technician told me by the way there is a big rut hole in the sub frame and you might want to have that looked at. He also stated it looks strange because the rest of the car is in...
Read the full complaint
such great shape. I had new struts and tie rod installed about 2 years ago so I took it in there to have it looked at next. I was then told this is amazing, but we have seen this before on these chrysler pacificas! (Red flag). They told me to check with the dealer because there is probably a recall on it. I then called the dealer to make an appointment to have it looked at. The service tech told me he knows what I am talking about and took my vin number over the phone. After a few minutes he told me there was an extended warranty for this case and unfortunately it did not cover my vin. Then he suggested I call chrysler customer service to complain and see where it gets me. (Nice). After speaking with chrysler and told them the story and how it basically renders my car unsafe to drive she explained to me that there was a warranty for a 6 week period in 2004 and I did not qualify. I have read numerous articles on the internet now about this problem and possible class action lawsuits. Needless to say, I drive around with children in the car and this thing is a time bomb and chrysler needs to admit there is a problem and warn all current owners before someone gets injured or killed!
Tl* the contact owns a 2006 chrysler pacifica. The contact stated that the driver's seat belt failed to function, the service engine indicator illuminated, and there was an internal leak emitting from the vehicle. The vehicle was taken to the dealer where it was serviced per nhtsa campaign number: 06v432000 (power train); however, the fuel pump module was not replaced. The technician was unable to determine where the vehicle was leaking. The vehicle was taken back to the dealer on several occasions, but the failure...
Read the full complaint
was unable to be replicated or diagnosed. The contact was waiting for a response from the manufacturer to determine the recommended repair solution. The approximate failure mileage was 147,000.
Rotted out engine cradle vibration when driving..No help from chrysler...Cant drive car,,still paying on it...Need help. *Tr
Tl* the contact owns a 2006 chrysler pacifica. While driving various speeds, the vehicle stalled and was able to be restarted. The failure recurred on numerous occasions. The vehicle was taken to an independent mechanic who diagnosed that the fuel pump, water pump, cam shaft sensor, catalytic converter, oxygen sensor, timing belt, pvc valve, and multiple other parts needed to be replaced. The vehicle was repaired; however, the failure persisted. The contact was aware of nhtsa campaign number: 06v432000 (power train), but the vin was not included. The manufacturer was notified. The failure mileage was unknown.
Chrysler Pacifica engine complaints by year
Pacifica engine problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data