Reccall f44 (fuel pump module). This recall was for repair/replace of module due to fact that pacifica cars stall with faulty unit. My car has stalled numerous times. I took to dealer as instructed by recall letter. The dealer said they made repair. My vehicle continues to stall. Dealer would not replace part again. I am stuck with a vehicle I cannot drive because it is unsafe to drive.
Engine & cooling
2006 Chrysler Pacifica Engine problems
Owners have filed 247 complaints about the 2006 Chrysler Pacifica's engine & cooling with NHTSA - 34% of all its complaints, most recently on August 11, 2025. They describe 4 crashes, 2 fires and 3 injuries. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.
- Complaints
- 247
- Recalls
- 0
- Crashes
- 4
- Fires
- 2
- Injuries
- 3
- Deaths
- 0
Engine complaints
My engine cradle is almost rusted thru and my subframe is as well
My car failed inspection because my mechanic noticed it the engine cradle was rotting and had holes in it all over. So he said this is an ongoing problem with chrysler pacifica's and that they were poorly designed. To repair would cost me about $2000-2500. I feel horrible and lied to because chrysler isn't taking responsibility for this defect. That kind of money is not in my budget. I don't understand how something so important could be overlooked by chrysler.....I'm really fed up.
Tl* the contact owns a 2006 chrysler pacifica. While having the vehicle inspected, the contact was informed that the engine cradle was rotted. The vehicle was taken to a dealer where the technician confirmed the engine was rotted and needed to be replaced. The vehicle was unable to be repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 96,000.
Intake plenum has failed causing the car to stall out when turning in front of oncoming traffic. Definitely a safety hazard. This defect is in all chrysler pacificas. As a secondary consequence, this defect causes excessive emissions, increasing air pollution.
Took car to mechanic and he noticed the motor mount subframe was completely rotted out and cracked that supports the engine weight and suspension of the car. Though no incident took place yet, this issue could have had the engine fall out at any time.
The engine light came on. The car would not accelerate over 25 mph. It kept feeling as if it was stalling when stopped at light and trying to accelerate. Hard to go up inclines. After being parked for 4 hours we noticed the car was smoking. I called the fire department who discovered that the insulation and the engine was smoldering. It is now at excalibur being looked at. I was driving on a city street when this happened. When we discovered the car was smoking, it had been parked for four hours.
Entered the freeway and after reaching speed of approximately 55-60 mph I heard a loud sound that sounded like a small explosion. Someone driving in the lane next to me began frantically pointing at the engine of my car. Immediately I saw smoke and flames coming from underneath the car's hood. I pulled off the exit that I was approaching, parked the car at the curb, jumped out the car, dialed 911. Fire department responded in a couple of minutes and by this time entire engine and hood was on fire.They put the...
Read the full complaint
fire out. Car was not able to be placed in neutral or any other gear, but was still towed to the dealership that performed repairs to fuel injectors and other components of the engine on february 2, 2016. During feb. 2016 Incident the gas pedal would not give power to make the car accelerate, car started smoking and giving off fumes that smelled like burning plastic. Car repairs were made in that incident. Going to have diagnostic performed to research if there is a connection/relation between february 2016 incident and june 2016 incident.
My vehicle stalls when remaining still, or if driving it will just shut off. Turning left around a round about it will shut off. Recently when stopped it will idle high then sputter as if it wants to shut off, sometimes it does. I know there has been a recall for vehicles made up to the date november 2004. Mine was manufactured may 2005, should that make a difference even though mine was manufactured one year later and still can have the same problem? Just a note, I have young kids in my car. Another problem is...
Read the full complaint
the engine, in researching I notices that there have been a lot of complaints about rusting engine mounts or breaking of engine mounts. As may complaints that I have read, I believe that there should be a recall. I have an engine mount that is rusted and worn out. For the safety of all the 900 and something complaints in forums, I believe this should be fixed. I also believe that my 2006 pacifica should be in the stalling recall notice and be fixed also. One year apart should not be judged in a issues. This happens a lot an many dates, but I can only put one.
When we bought the car not 11 months ago we were never told about any structural damage. A week ago we noticed a bad thumping as we were driving, so we took it to a car shop and that's when they found over 4 inches of rust on both sides of the engine cradle and they told us it was unsafe to drive.
I had taken my car in a week ago for an issue with the car making like a popping sound when I turn hard. Well after mechanic drove it and then put it on a rack to take a look underneath and do their inspection they told us we cannot drive vehicle as it is unsafe. The cradle was completely rusted and I could stick my hand in it. At any point in time it could have completely fell off and wrecked my vehicle. It could have been catastrophic. This is dangerous and chrysler is aware of the issue but refuses to do...
Read the full complaint
anything about it. Now we are going to be stuck with the repair bill. I called chrysler and spoke with an agent named brittney whose only response was I am sorry there is nothing we can do. Even after explaining any type of accident with my children in the car could have been catastrophic. They do not care. Something needs to be done to cover all vehicles. I only have 75,000 miles on the vehicle and the cradle is the only part rusted. Chrysler does not care about any of that just that the vehicle does not fall within the 2004 or 2005 range. Please help something needs to be done before someone loses their life over this issue.
The engine mounts have broken, and been replaced, and broke again. The floorboard, has rusted through on the drivers side, and the frame is rusting out. The suspension is breaking and has now blow out 2 tires. The electrical panel /dash, doesn't work and causes other problems. I don't live by salt water and have been informed that this is not a new problem with this make/model. Gas fumes come up through the floorboard, and I have been dealing with this since I took it off of the dealership. I am a single mom of 3,and am not finding help from anyone. Can you please help me?
The engine cradle is rusting through. The engine could fall out to the ground. I noticed this around the 12th of february 2016.
The front member of the car has rotted away. This is very dangerous and can cause the engine to fall out.
Went in for an oil change and found out the subframe on the vehicle was rusted out. Took it to my mechanic. After researching I have found many posts on this happening to many people with this make and model. Please check into this issue, it seems that something is not right with this part of the vehicle. The car is in perfect shape no rust or corrosion anywhere else on the vehicle.
I brought my pacifica in for servicing, and was told that my engine cradle is rotting away. They said it was unsafe to drive. Fda said they won't help by fixing it.
Tl* the contact owns a 2006 chrysler pacifica. The contact stated that the motor bracket and the motor mounts fractured. As a result, the engine was mounted on top of the starter and ignited a fire. There were no injuries and a police report was filed. The manufacturer was not made aware of the issue. The failure mileage was 115,000.
Tl* the contact owns a 2006 chrysler pacifica. The contact stated that while making a left turn at 35 mph, the vehicle stalled. The contact was able to restart the vehicle. The failure recurred on numerous occasions. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 100,000.
2006 Chrysler pacifica was deemed unsafe to drive on 12/12/15 upon taking car in for an oil change. Mechanic stated that subframe is rusted and has a 6 inch hole meaning that the engine could fall off the car. I do know that there was a problem with 2004 and 2005 models and didn't expect to hear the news on my 2006 model.
Engine cardle ( subframe) was rusted out and mechanice suggested its nor safe to drive. According to mechanics and complains fieled on this web site its a common issue with this vehicls and it will caus crashes soon.
Tl* the contact owns a 2006 chrysler pacifica. While the vehicle was being serviced, the dealer observed that the engine cradle was rusted and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 174,000.
Tl* the contact owns a 2006 chrysler pacifica. While at a complete stop and attempting to accelerate, the vehicle stalled without warning. The contact also stated that the vehicle would jerk on some occasions prior to the failure.The contact stated that the vehicle was able to restart after several attempts with a hard start. The vehicle was taken to be diagnosed, but the details of the failure could not be provided. The manufacturer was made aware of the failure. The failure mileage was 75,000.
Tl* the contact owns a 2006 chrysler pacifica. The contact stated that the service engine warning light flickered and the vehicle overheated. The vehicle was repaired by replacing the hose. The contact also noticed that the engine cradle/subframe was rusted with holes and could fracture. The vehicle was taken to over three independent mechanics who diagnosed that the engine cradle/subframe needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 210,000.
Upon regular maintenance, the auto mechanic discovered my 2006 pacifica engine cradle frame is totally rusted out. He advised me the cost of repair is so high that it is not worth to repair. He further required me to acknowledge that my car is not safe to drive. This is very unusual to have a subframe rusted though the whole metal frame since the car was always kept in maryland, we hardly have any snow in the last 10 years. From the search on the internet, it turns out that this subframe problem affected was common in many pacifica on the road. We felt fortunate that the engine has not dropped on the ground and lead to a fatal crash. Why there is not recall on these pacificas .
Tl* the contact owns a 2006 chrysler pacifica. The contact stated that the engine cradle prematurely rusted to the point that it was corroded and may fracture. The vehicle was taken to a mechanic, who inspected and diagnosed that the engine cradle needed to be replaced. The manufacturer was notified of the failure. The approximate failure mileage was 163,000.
Chrysler Pacifica engine complaints by year
Pacifica engine problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data