Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2011 Ford Crown Victoria Problems, complaints & recalls

Owners have filed 24 complaints about the 2011 Ford Crown Victoria with NHTSA, most often about the steering (13) and the suspension (4). Those complaints describe 1 crash. It is covered by 2 recalls, the latest in November 2014 for the pinion shaft. For comparison, the 2010 has 12.

NHTSA data checked

AFar fewer problems than a typical Crown Victoria year, for its age

#155 most complained-about 2011 vehicle

Complaints
24
Recalls
2
Crashes
1
Fires
0
Injuries
0
Deaths
0

Most common 2011 Ford Crown Victoria problems

Share of all 24 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

2011 Ford Crown Victoria recalls 2

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Steering: pinion shaft

14V70400036,888 vehicles affected

The problem
Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.
The risk
Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.
The fix
Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.

Steering

13V385000355,000 vehicles affected

The problem
Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.
The risk
If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.
The fix
Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.

What owners say

Be the first Crown Victoria owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

24 complaints about the 2011 Ford Crown Victoria

Newest first, as filed with NHTSA by owners.

Steering

Ford is refusing to honor the 14S25 Recall. The recall was completed XXX9. The part appears to be the same and research supports this. How does replacing the same faulty part solve the problem? How is that considered a repair? "On your vehicle, it may be possible that the upper intermediate steering shaft was serviced incorrectly during previous repairs for Safety Recall 13S08 or Regional Program 13R01." - I take it as the recall was serviced incorrectly since one can be mistaken it wasn't serviced at all....

Read the full complaint

Regardless, this is a safety issue and it is unacceptable it is being ignored considering no improvements were made to the design. What difference does it make replacing the part with another faulty part two years after manufacture when now the car is 15 years old? The part is certainly in worse condition now and I fear the safety of highway travel going forward. Ford doesn't seem to have any compassion. Please let me know if you would like photos to be sent in. I am willing to provide images of the corroded part that can fail anytime soon. NHTSA Bulletin: [[redacted]] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Incident SteeringNHTSA 11775187
Transmission & drivetrainElectrical systemEngine & coolingCrash

Unknown

Filed Incident Power train · Electrical system · EngineNHTSA 11647631
Steering

I learned of recall on some models of crown victoria police interceptor. I own 3 such vehicles. Two were identified for recall, the third a 2011 however was not. This car has signs of steering issues very hard to turn the wheel at times. There is rust on the lower intermediate steering shaft and at the u joints of the shaft. When I took the other vehicles in for recall servicing I provided the vin # for the 2011 and was informed that there was no recall for it. I am hoping that the recall can be expanded to include this vehicle which is showing some signs of steering shaft issues.

Filed Incident SteeringNHTSA 11519486
Steering

Vehicle is exhibiting stiff steering issues associated with steering column. Mechanic determined steering shaft requires replacement. This vehicle was already involved in a steering column recall several years ago however the problem appears to have returned.

Filed Incident SteeringNHTSA 11519396
Steering

The contact owns a 2011 Ford Crown Victoria. The contact stated while driving 40 mph, the steering wheel started clicking and making an abnormal popping sound. The contact stated that the steering wheel was difficult to maneuver. There was no warning light illuminated. The contact stated he was able to continue to drive the vehicle. The vehicle was taken to the dealer who diagnosed that the intermediate steering shaft needed to be replaced. The manufacturer was made aware of the failure and advised the contact that the VIN was not included in NHTSA Campaign Number: 14V704000 (Steering) or 13V385000 (Steering). The vehicle was not repaired. The approximate failure mileage was 160,000.

Filed Incident SteeringNHTSA 11428047
Steering

Tl* the contact owns a 2011 ford crown victoria. The contact stated that while driving at speeds above 60 mph, the front end would vibrate and a clunking noise was present coming from the steering column. Eventually the steering column would not lock after parking the vehicle. The vehicle was taken to an independent mechanic who diagnosed that the lower steering shaft bearing was faulty. The vehicle was not repaired. The local dealer rye ford located at 1151 boston post rd, rye, ny 10580 and the manufacturer were...

Read the full complaint

notified. The contact was informed that the vehicle was not included in nhtsa campaign number: 13v385000 (steering). The contact stated that the vehicle had experienced the same failure listed in the recall. The failure mileage was 82,000.

Filed Incident SteeringNHTSA 11388103
Visibility & wipers

Lower rear window defroster tab disconnects from glass, and does not stay permanently attached.

Filed Incident Visibility / wiperNHTSA 11338977
Steering

My steering I super had to turn the wheel when parked as well as driving. It is because of the steering shaft is rusted out and very dangerous to drive .I just found out that ford had a recall on this issue but I never received a notice about it

Filed Incident SteeringNHTSA 11322802
SteeringSuspension

There is a recall on my car,the rite front wheel is making poping sounds.

Filed Incident Steering · Suspension · Unknown or otherNHTSA 11208767
Engine & cooling

The engine just ejected the #7 spark plug while driving straight on city, public roads and caused the car to dangerously and suddenly slow down. The car just behind me had to maneuver to avoid me.

Filed Incident EngineNHTSA 11099324
Lights

The left turn signal works sometimes but blinks rapidly most of the time. No bulbs are burned out. Sometimes the dash lights go out when the headlights are turned on and then the dash lights come back on when the headlights are turned off. Sometimes the dash lights come back on even with the headlights are on but the dash lights are very dim. It is becoming more dangerous to drive when you can't count on the dash lights or turn signals working. Ford has told me there is no recall for this year having a bad light control module. There was a recall for crown victoria years 2003 through 2005. My car has 111,566 miles.

Filed Incident Exterior lightingNHTSA 10980214
Steering

2011 Ford crown victoria. Consumer writes in regards to steering column shaft recall notice. *Smd the dealer informed the consumer, the vehicle would be inspected. However, the consumer stated according to the recall notice, the part would be replaced, as well as inspecting otter parts. The service representative responded again, by saying, first there would be an inspection to determine if the part needed to be replaced. The consumer stated he did not want to waste a day, just for an inspection. So he decided to make an appointment with another establishment, to have to part replaced.*Jb

Filed Incident SteeringNHTSA 10568470
Transmission & drivetrainEngine & cooling

Car stalls when in high speed passing gear. Turns over, will not restart. Happened multiple times. Was told by dealer this model has a history of this event. *Tr

Filed Incident Power train · EngineNHTSA 10553794
Wheels & tires

Tl* the contact owns a 2011 ford crown victoria police package. The contact stated that the front rims would become cracked. The vehicle was taken to the dealer where the technician was unable to diagnose the failure however, the vehicle was repaired. The manufacturer was made aware of the failure. The vin was not available. The failure mileage was 10,000 and the current mileage was 10,900. ...Updated 12-23-13 *bf

Filed Incident WheelsNHTSA 10549219
Body, doors & structure

I live in the state of florida, and in may 2013, I purchased a former wisconsin police vehicle, 2011 crown victoria from van horn motors of milwaukee in wisconsin. Approximately one month later, after discovering rust particles on my garage floor, I noticed the entire undercarriage, including but not limited to the intermediate steering shaft, mufflers and brake lines are completely covered in rust. This problem was brought to the attention of the dealership via emails with numerous photos attached. No reply was...

Read the full complaint

ever received, nor was this problem made aware to me either by landline, email or any other form of communication. In july and part of august 2013, I took it upon myself to physically wash, wire brush, sand, pressure wash, prime and paint the entire undercarriage. Since I had to this while lying underneath the vehicle the whole process took me five days to complete and approximately $250.00 In equipment usage, purchases and labor. Before and after photos are available effective immediately. I really would like to know, either from the national highway traffic safety administration, the center for auto safety and/or ford motors, how I can please be reimbursed? *Js

Filed Incident StructureNHTSA 10538335
SteeringSuspensionBrakes

Steering this car was a nightmare always pulling to the right. Also brakes constantly grabbing and screeching. Also headlight and suspension problems. Was not happy with this car from start but was slammed into by dealership and chase... I am a senior citizen 76 years old. Please help. *Tr

Filed Incident Steering · Suspension · Service brakesNHTSA 10522077
SteeringSuspension

INSPECTION FOUND DISLOCATED BUSHING. *TR

Filed Incident Steering · SuspensionNHTSA 10478033
SteeringSuspension

INSPECTION FOUND DISLOCATED BUSHING. *TR

Filed Incident Steering · SuspensionNHTSA 10478028
Steering

Inspection found the lower column bushing dislodged from tube and shaft working out of spline. *Tr

Filed Incident SteeringNHTSA 10476621
Steering

Inspection found lower bushing of steering column dislodged and shaft working out of spline. *Tr

Filed Incident SteeringNHTSA 10476620
Seats & seat belts

My police department issued me a 2011 ford crown victoria around september of 2011. Ever since, I have spent countless hours adjusting the seat in an attempt to keep my mid-lower back from hurting. I learned that there is a metal bar installed in the seat causing the issues. Once the bar is adjusted, the seats aren't as bad. I also have had a great amount of trouble with neck pain. I have since had to see a doctor about this. The head rests that are in the vehicle are causing my head to be pushed forward and straining the muscles in my neck. I'm shocked to learn that this hasn't already been a recall for ford. *Tr

Filed Incident SeatsNHTSA 10466919
Seats & seat belts

The headrests on the 2011 ford crown victoria are causing the officers to have neck problems. The headrest is so large and does not adjust forward and backward, it is pushing their heads forward and down, as you know they spend at least 8 hours in their vehicles each shift. Since we have purchased the 2011 crown vics we have had nothing but complaints. It is very uncomfortable and unsafe for the officers to be driving under these conditions. *Js

Filed Incident SeatsNHTSA 10462258
Seats & seat belts

I am a detective with the belleville police department, nj. We are having an ongoing problem with the ford crown victoria 2011 police intertceptor with manual seats. All our officers are reporting lower back pain due to a lower back bolster built in as part of the seat. This bolster is not adjustable. Upon bringing this problem to our local fleet dealer, we were advised that it was the design of the seat, and that even if we wanted to replace these seats with the six way power seat for the same year we were advised...

Read the full complaint

that ford and our insurance carrier would not allow it due to safety reasons. We have reached out to other police departments if they are having the same problem with these seats, and I am currently building a database of other departments. Please contact our department to be included. Thank you. *Tr

Filed Incident SeatsNHTSA 10454798
Seats & seat belts

Rental 2011 ford crown victoria. Consumer writes in regards to vehicle seating *tgw the consumer stated none of the seats had any lumbar support, there was no leg room and there was also inadequate headrest support in case of an accident. *Jb

Filed Incident SeatsNHTSA 10400349

Ford Crown Victoria: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
201124210SteeringA
201012230SteeringA
200944252SteeringB
2008503113SteeringC
200750461SteeringC
All Crown Victoria years

2011 Ford Crown Victoria vs rivals

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2011 Ford Crown Victoria? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2011 Ford Crown Victoria

Does the 2011 Ford Crown Victoria have any recalls?

Yes - NHTSA lists 2 recalls for the 2011 Ford Crown Victoria: pinion shaft (November 2014); steering (August 2013). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

What are the most common problems with the 2011 Ford Crown Victoria?

By the complaints owners filed with NHTSA, the most common problem areas are the steering (13), suspension (4), seats & seat belts (4).

How many complaints has the 2011 Ford Crown Victoria had?

24 complaints have been filed with NHTSA, the first on May 10, 2011 and the latest on November 2, 2026. Of these, 1 describe a crash and 0 a fire, and together they report 0 injuries and 0 deaths.

Is the 2011 Ford Crown Victoria a reliable vehicle?

Its Safety Index is 85 out of 100 (grade A: far fewer problems than a typical Ford Crown Victoria year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Ford Crown Victoria years have the most complaints?
What should I do if my 2011 Ford Crown Victoria has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience