The contact rented a 2003 Ford Explorer. The contact stated that while driving at an undisclosed speed with the seat warmer activated, after arriving at a Rest Stop and exiting the vehicle, the contact became aware that a blister had formed on the back of her left thigh. The contact attributed the blister to a burn sustained while using the driver's side seat warmer. No warning light was illuminated. The vehicle was not taken to the dealer or an independent mechanic, but instead was returned to the rental company. The manufacturer was not notified of the failure. The failure mileage was 43,253. The VIN was not available.
Seats & seat belts
2003 Ford Explorer Seat Belt problems
Owners have filed 36 complaints about the 2003 Ford Explorer's seats & seat belts with NHTSA - 3% of all its complaints, most recently on September 17, 2025. They describe 3 crashes, 0 fires and 3 injuries. Seat belts that won't latch or retract, seat frames, seat heaters, recliners and child seat anchors.
- Complaints
- 36
- Recalls
- 0
- Crashes
- 3
- Fires
- 0
- Injuries
- 3
- Deaths
- 1
Seat Belt complaints
The problem the seat belts does not have enough tension to retract consequently getting on the door lock mechanism, causing the door not to lock, to stay open unsecured also damaging the seat belt, it does no have a way to increase the tension which it should have. It damaged my door seal, my lock mechanism and the belt too.
Chat conversation start 5:57pm greetings, I saw you commentary about the ford explorer exhaust fumes inside the cabin, well I have a 2004 ford explorer with the same problem, I am a mechanic I figured may be the filter was clogged well it was no filter, what I found the vent door fell off from the place where it suppose to open and close laying down on the fan, so I reinstalled back and the problem was fixed, it is a poor design from the ford company. I was loosing heat during winter and not be cool at the...
Read the full complaint
summer loosing the thru vent out place. Ford needs to fix all this problems along with seat belts, rear window quarter panel cracked no one is getting ford to do recalls on this items very poor construction.
The problem with seat belts does not have enough tension to retract the harness causing to stay by the door and not closing good, it means the belts it is by the door mechanism jamming the lock and not locking properly on driver or passenger side, I had the door open while I was driving, also destroyed my door seal tearing up, the manufacture ford does not want to replace it for free since it is a manufacture defect, they want to charge for the replacement and even the new ones are not working properly. I check...
Read the full complaint
all this stuff since I was a fleet maintenance mechanic, car inspector. Government needs to step in and fix the safety harness for good tension. This happened when I was driving, also parked the door did not close properly due the harness did not retracted.
The problem the seat belts does not have enough spring action to retract causing to be laying down and it is getting caught by the door lock mechanism messing the belt plus causing the door not to lock properly, either the driver or the passenger side. The door came unlock since the harness did not retract. It needs attention and being replace by the dealer or being recall to make sure it is replace. The belt is getting damage.
The problem with the seat belts does not have enough retraction force like it used to be, they hang out, damaging the door locking mechanism and door seal, driver and passenger side. It has being a problem not retracing the belt like it suppose to. *Tr
The problem with the forward seat head rest wrong angle causing the driver to get stiff neck and get you really tired driving long distances, there is no way to adjust but up and lower not enough to clear your head to be straight as proper posture, I understand it is to prevent neck injuries, my recommendation to have an adjustable head rest fwd and aft side and higher to adjust to your body properly. It is a big concern since lots of people get on the road and they get really tired and uncomfortable driving. *Tr
The problem with the seat belts that it does not retract, it seems to me that system would not hold any tension to be safe on the road and beside that it does not retract, it torn the seal because metal hook was still sticking out and it got caught on the door consequently tearing the seal, they are the same way on both side of the vehicle, driver and passenger. I brought to the dealer and it seems like they don't care to replace it. *Tr
Manufacturer latent defect - driver seat base frame track broken. *Tr
Water runs down front passenger seatbelt apperatus, inside the car. Water damage seen on interior roof from water leaking inside the roof of the truck.
Tl*the contact owns a 2003 ford explorer. The contact stated that the second row middle seat belt was not working. The seat belt cannot be pulled out to hook into the child seat. The manufacturer stated that the seat belt was not under warranty; therefore, the contact would have to pay for a diagnostic. The vehicle will be taken to a child seat technician and the dealer. The failure mileage was 125,000.
SEAT BELT WON'T RETRACT. *TR
Tl* - the contact called about the 2003 ford explorer xlt. The contact stated that the air bag light stayed on, and when it was on, the airbag deactivated which was a safety problem. It happened all the time. The fuses have been changed under warranty, and now that it was not under warranty, it was no longer repaired free of charge. The contact stated that she was told by one service station that it was standard for the fuses to blow because of the fuse box location. Another service station told the contact...
Read the full complaint
that this was not true that the fuse box was to high in the car for pebbles to be able to get into the fuse box. Also, the windshield wipers won't turn off by them selves, even when the keys were out of the ignition. The contact stated that the airbag light and the door ajar light were consistently on. Moreover, the electronic seat would not move forward or backward. She had the seat repaired twice and it failed again. Finally, contact stated that the vehicle was making a knocking noise in the front and rear of the vehicle's undercarriage. The vehicle clanked stopping, turning to go forward, or just sitting still. The first time the contact took the vehicle for repair she was told by the repair shop that it was the driver's seat that was causing the clanking noise, and the second time she was told that the noise was not something they could identify because during diagnostic testing it did not show a specific failure code. The current and failure mileage were both 114000.*Ak
1. While stopped on the interstate waiting for traffic to move, my 2003 ford explorer xlt was rear-ended by another suv traveling at presumably highway speed. As a result, my suv was propelled forward, hitting the rear of another vehicle. 2. **Drivers side airbag did not deploy.** Passenger's side airbag deployed (the driver was the only passenger). **The base, and possibly the back, of the drivers seat broke.** (I was restrained in a seat belt.) I hit the roof of the vehicle, hitting my head quite hard on...
Read the full complaint
the rubber gasket edge of the moonroof, and when landing I think I hit my nose on the steering wheel. When I landed, the base of the seat broke...When looking at it from the side (looking at the controls), the base of the seat has a bend in it like an upside-down v, and the seat back appears to be reclined. I still have a knot and pain on the top of my head, my neck is stiff and now sometimes pops/cracks/crunches when I turn my head, my left shoulder joint is very sore, and I have some dull intermittent lower back pain. Besides temporary bleeding immediately after the accident, I am unaware of any damage to my nose. 3. No repair has been done. Insurance damage estimate is pending, but I expect it will be considered totaled. *Jb
2003 Ford explorer's driver's seat shifted when the consumer accelerated or decelerated quickly. *Ts the seat was repaired once already. A local dealership has looked at the seat recently but indicated that they cannot guarantee the repair. *Nm
The seat belt is cutting through the plastic on the height adjustment where the belt comes out of the hole, which potentially could wear out the belt and cause it break in an accident. *Nm
Ref ford tsb 05416 feb 06 - front passenger seat in 2003 explorer begins to make noise when accelerating, slowing or going over bumps. Dealer hears problem, no parts available, agree to return when parts received. Mar 06 - parts received (retainer clips) and repairs made per tsb 05416 aug 06 - same problem again, dealer recommends replacing seat track frame. Will not cover under tsb and claims "bumper-to-bumper" extended warranty also will not cover. Now in cat and mouse game with ford regarding this obvious manufacturing defect that is possibly safety related as well. *Jb
The rear seat (cushion portion) was dislodged and threw the person sitting in the seat with a seat belt on up against the back of the front seat. This has happened on several occasions with sudden stops. The dealer has looked at it several times and can find no way to anchor that portion of the seat in. *Jb
Hello. I have several complaints regarding my 2003 ford explorer including several safety issues. The first complaint is regarding the driver's seat which shifts routinely on acceleration and de-acceleration. This concerns me if I get into an accident and the seat malfunctions. The second complaint is regarding the gear shifter not going into park easily. I have to jiggle it to into park. I am concerned that this might not properly engage park and my vehicle might roll. Thirdly, my rear lift gate trim has...
Read the full complaint
had to be repaired at least 3 times. I am concerned that although the dealership says there is no safety issue, there possibly could be due to the rear lift gate hinges being recalled and representative informing me that the reason that I continue to have a crack appearing is due to design flaw. This concerns me b/c I frequently utilize the lift gate to retrieve groceries and other items and do not want the window to fail and fall on my head. The remainder concerns are regarding the function of my vehicle. I have had to have 3 of the window motors replaced under warranty. The transmission has had to be fixed twice (shifting module malfunction). Finally, the fuel gauge had to be repaired due to improper fuel readings. I guess all these items could be very problematic as well b/c I could run out of gas and be stranded with my child, my vehicle might not shift properly leaving me stranded. Please do not hesitate to contact me if you have questions. Ps. I would also like to add that as I was completing this process I remembered that my vehicle had a high pitched whine that had to be repaired. I do not remember exactly what had to be repaired but it was covered under warranty. *Nm
I was following up on the death of a 1 month that was ejected from a cosco child seat in a motor vehicle train accident. While following up on the death, I was looking at photographs of the vehicle from the investigating agency. I noticed there were no photographs of the car seat or the passenger side of the vehicle where the train had struck the vehicle. I went to the impound lot where the vehicle was stored and met the father of the deceased child. He was collecting property from the inside of the vehicle. He...
Read the full complaint
showed me a stroller and the car seat. The stroller had been ejected from the vehicle and was damaged and the car seat was still inside the vehicle. This car seat and stroller are sold as a set from k-mart and had been purchased in november of 2005 in hutchinson kansas. Upon looking at the car seat which was rear facing in the vehicle and still strapped in the vehicle by the seat belt. I was informed by the captain of the sheriff's department that one of their officers trained to install child safety seats said the seat was not installed properly. My concern of the accident was that the strap that would have gone over the right shoulder of the child was completely undone from the latch on the back of the child safety seat. The strap on the left shoulder was almost completely undone and I photographed the routing of the strap before removing the seat from the vehicle. The owner of the seat gave me the following information off of the seat. Model # 22-300-swb; 11/10/04 gbib. Reg no pa-25334(cn) permit # 1780-333 dorel juvenile group inc. From the impact of the train to the passenger side rear 1/4 panel of the 20-03 explorer, the child was ejected from the child seat and died 3 hrs later from head injuries. From the investigation, I believe there may be a problem with the latching and holding ability on the back of the child safety seat. *Jb
I have an eddie bauer edition expedition (2003) . This unit came with outside rear view mirrors that tilt down and inward when you put the car in reverse to assist you in backing up. The issue I have had since it was purchased new is that the mirrors do not return to thier original position consistently once you put the venicle back into a forward gear. This issue becomes a safety issue once out on the roadways as when I go to pass I can't see if there are any vechicles in the lane I need to get into. Harold...
Read the full complaint
zeigler auto group sold me the car in kalamazoo, michigan. They have told me there is no problem with the mirrors and have done so more than once. Can you help get this resolved. The drivers seat also doesn't return to its programed position and this is an imtermitten problem which zeigler had fixed once and its starting to act up again! Also I've had rear end work done more than twice and its starting to howl once again. They actually replaced it once completely and repaired it twice, is thier an issue with the rear ends on this model year? Thanking you in advance for your time and consideration on these matters. Respectfully gary a. Anspaugh
Front seat belts are cutting into the pilar molding. The front driver's side molding has been replaced twice in two years. Ford states they have not heard of this problem, but I have been looking into other ford explorers in parking lots and see that it is happening in most of the vehicles. My fear is that there is not a permanent solution to this defect. By cutting into the molding, the seat belt could get stuck and not work properly in an accident, etc.
My 2003 ford explorer has had an ongoing problem with seatbelts and the remote entry. This has been going on since we bought the vehicle. Ford refuses to address the problems.The seatbelts do not retract properly and they cut into the plastic. I am afraid that these seatbelts are defective and I worry that they will not work in a crash. The dealership has replaced these seatbelts but the problem is still there. The remote entry does not work all of the time. It does not allow you to lock and unlock the doors. The dealership told us to replace the batteries which we did but that was not the problem. They refuse to replace the remotes.
Ref: odi id number : 10016221. I have the same problem with my 2003 explorer as the referenced problem. When I get out of the driver's seat, the seat belt does not fully retract. Unless I physically "throw" the excess back into the vehicle, the door gets shut on the belt. I had to have the plastic button on the belt replaced because the door broke the original one.*Ak
The front driver's seat belt will not retract back, and the seat belt would be to loose for the consumer to wear. Dealership was notified, but did not resolve the problem. *Ak
Ford Explorer seat belt complaints by year
Explorer seat belt problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data