- The problem
- On certain trailer mounted aerial work platform booms, the hold down bracket that secures the mast/upper structure for transport may become damaged or loose over time. If the mast hold-down bracket sustains structural damage, it may no longer be capable of holding the trailer mast in place during transport.
- The risk
- This could result in upper structure movement and could contribute to the trailer becoming unstable when rounding a corner, increasing the risk of a crash.
- The fix
- Genie will provide a mast cradle replacement kit to owners of all affected machines free of charge. The recall began on april 5, 2007. Owners may contact genie at 866-927-7269.
Vehicle safety record
2004 Genie TZ-50 Problems, complaints & recalls
Owners have filed 1 complaint about the 2004 Genie TZ-50 with NHTSA, most often about the equipment & accessories (1) and the suspension (1). It is covered by 3 recalls, the latest in March 2007 for the structure. For comparison, the 2005 has 0.
NHTSA data checked
- Complaints
- 1
- Recalls
- 3
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Most common 2004 Genie TZ-50 problems
Share of all 1 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2004 Genie TZ-50 recalls 3
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- On certain trailer mounted aerial work platform booms, the outriggers (stabilizers) can function when the machine is not in a fully stowed position.
- The risk
- The down limit switch and its location on the machine allow the limit switch to be activated when it comes in contact with the boom arm, making it possible to raise the outriggers while the platform is elevated, increasing the risk of injury to the operator.
- The fix
- Genie will provide a limit switch replacement kit and installation instructions to owners of all affected machines. The recall began on january 11, 2007. Owners may contact genie at 1-877-738-7530.
- The problem
- On certain trucks, during assembly, the drag link attachment nuts at the pitman arm and steering arm may have been incorrectly torqued. Residual grease and paint which was applied as a rust inhibitor on the steering arm may have contributed to a loss of torque after assembly.
- The risk
- Increased wear for the draglink connections can occur creating a noticeable increase in the amount of steering wheel free play. If this condition was ignored, a loss of steering control of the vehicle could occur which could result in a crash.
- The fix
- Dealers will inspect the steering arm tightness and remove all grease and paint from the steering arms and retorque the draglink attachment nuts at the steering arm and pitman arm. The recall began on may 12, 2006. Owners may contact hino at 1-248-648-6430.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
1 complaints about the 2004 Genie TZ-50
Newest first, as filed with NHTSA by owners.
Tl* the contact owns a 2004 genie tz50 towable lift. The contact stated that while driving 65 mph, the aluminum outrigger fell off during transport due to the disintegration of a rubber washer. The manufacturer was notified and agreed to replace the washer that was damaged, but would not supply a kit to prevent the other three from having the same safety issue. Updated 07/10/12*lj
Genie TZ-50: every year compared
All TZ-50 yearsQuestions about the 2004 Genie TZ-50
Does the 2004 Genie TZ-50 have any recalls?
Yes - NHTSA lists 3 recalls for the 2004 Genie TZ-50: structure (March 2007); electrical system (December 2006); linkages (May 2006). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2004 Genie TZ-50?
By the complaints owners filed with NHTSA, the most common problem areas are the equipment & accessories (1), suspension (1).
How many complaints has the 2004 Genie TZ-50 had?
1 complaints have been filed with NHTSA, the first on June 11, 2012 and the latest on June 11, 2012. Of these, 0 describe a crash and 0 a fire, and together they report 0 injuries and 0 deaths.
What should I do if my 2004 Genie TZ-50 has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data